Accessory Power GOgroove FlexSmart SP User manual

Brand: Accessory Power

Model: GOgroove FlexSmart SP

Category: FM transmitters

Type: User manual

INSTRUCTION MANUAL

Product Diagram

What’s in the box?

Thank you for purchasing the GOgroove FlexSmart SP. Utilizing the latest

technology in FM Transmitting, this device allows you to listen to music over your

car speakers while driving. It’s easy to setup and packed with loads of features like

a 180

rotating mount and hands-free calling capability.

(a) FlexSmart SP

FM Transmitter

(b) 3.5mm audio cable

(d) Mini USB cable

1- LCD display

2- UP/DOWN station selector

3- QuickSCAN / Power button

4- Cradle wings

5- Flexible neck

6- DC barrel

7- Power LED

8- Cradle lock

9- USB power port

10- 3.5mm audio port

11- Microphone

132

Quick Start

1. Plug the FlexSmart SP (6) DC barrel in to the DC outlet in your car.

2. Tune your car FM stereo to an unused radio station. You will know that it is

unused because you will hear static. Adjust the FlexSmart SP frequency

to match the station shown on your car FM stereo. If this has been done

correctly, the static should turn to silence as soon as the FlexSmart SP and car

FM stereo stations match.

3. Put your MP3 player or smart phone into the FlexSmart SP cradle and adjust

the (4) Cradle wings to securely hold your device.

4. Connect the (b) 3.5mm audio cable to your device. Begin playing music from

your device and you will hear the sound come through your car speakers.

Simply insert the (6) DC barrel of the FlexSmart SP into your vehicle’s DC (ciga-

rette lighter) outlet.

YourFlexSmart SP FM Transmitter is like a small FM radio tower. Once you set

your FlexSmart SP to an FM station, it will then broadcast a signal to that par-

ticular FM frequency. All you have to do is match your car stereo to that same FM

station and you will be tuning into the FlexSmart SP’s broadcast.

1- With your car stereo, nd an FM station that contains static.

2- Use the UP/DOWN station selector to match your FlexSmart SP FM frequency

to the one shown on your car stereo. When you hear silence, this means that you

have tuned the FlexSmart SP and your car FM stereo correctly.

Operating instructions continued >>>

Operating Instructions

Installation

Tuning the FlexSmart SP to Match your Car Stereo

Positioning the Neck, Head and Cradle

The FlexSmart SP is designed with a fully articulating neck, head and cradle which

allow you to get the perfect t for your vehicle and viewing preferences. The head

is capable of rotating 180

for viewing in either landscape or portrait position. This

is convenient because some applications work better in dierent views.

The (5) Flexible neck is very sturdy. You can bend it in any direction to ensure that

it sits at your optimum access and viewing angles. The stability grips located on

the FlexSmart SP (6) DC barrel will make sure that your device is secure at any

angle, and while making sharp turns.

Connecting your iPod ® or iPhone ® to the FlexSmart SP

Connecting your Smart Phone or MP3 Player to the FlexSmart SP

Mounting your Device

Plug one end of the (b) 3.5mm audio cable into the FlexSmart SP (10) 3.5mm

audio port.

Plug the other end of the (b) 3.5mm cable into the headphone port on your iPod

or iPhone.

To charge your device connect your original Apple USB cable to the (9) USB power

port. This will allow you to charge your device while the FlexSmart SP is in use.

Plug one end of the (b) 3.5mm audio cable into the FlexSmart SP (10) 3.5mm

audio port.

Plug the other end of the (b) 3.5mm cable into the headphone port on your smart

phone or MP3 player.

To charge your device connect your device’s original USB cable or one of the

included (c) Micro USB cable or (d) Mini USB cable to the (9) USB power port. This will

allow you to charge your device while the FlexSmart SP is in use.

Press the (8) Cradle lock to widen the (4) Cradle wings on the FlexSmart SP. Insert

your device and squeeze the (4) Cradle wings to securely grip your device.

Adjusting Volume

Using the QuickSCAN / Power Button

Hands-free Calling

When using the (b) 3.5mm audio cable with a music device, you will be able to

adjust volume with both your car stereo and your device volume controls.

The (3) QuickSCAN / Power button has two functions. You can use it to tune the

FlexSmart SP to a pre-dened FM station and it can also toggle the FlexSmart SP

power ON and OFF.

Toggling power to the FlexSmart SP can be done by pressing and holding the

(3) QuickSCAN /Power button for 5 seconds. You will notice the LCD display turn

o.

Making a call

Dial or select the number of the person you want to call on your smart phone.

Once the call is connected, the sound will come through your car’s speakers. Use

your normal speaking volume and the FlexSmart SP (11) Microphone will pick up

your voice. When the call has ended, hang up and the music will fade back in.

Answering a call

When your phone begins to ring, your music will fade out. Press your phone’s

answer button and the call sound will come through your car’s speakers. Use

your normal speaking volume and the FlexSmart SP (11) Microphone will pick up

your voice. When the call has ended, hang up and the music will fade back in.

Voice dialing

If your phone is equipped with voice dialing, activate the voice dialing feature

when you are ready to make a call. Use your normal speaking volume to say the

name of the person you’re calling and the FlexSmart SP (11) Microphone will pick

up your voice. When the call has ended, hang up and the music will fade back in.

The FlexSmart SP is equipped with a (9) USB power port that you can use to

charge most USB devices. This will allow you to charge devices like MP3 players

and cell phones while the FlexSmart SP is in use.

Troubleshooting

There is no sound when connecting the (b) 3.5mm audio cable…

1- Please make sure that you are connecting the cable FIRST to the FlexSmart SP,

and then to your device.

2- Please make sure that the volume setting on your device and on your radio are

turned up loud enough.

I can hear sound, but there is so much static…

1- Please try to adjust the radio station you are using. Many times there are several

stations that are unused, but some still work better than others. Please try several

stations.

2- When there are multiple cell phones in a close proximity, they create interference

with audio signals. You may be experiencing a combination of FM frequency

interference and cell phone interference. If you are driving, the problem will

improve by trying a new FM station and changing your location.

Some of my devices are not charging via USB…

1- The FlexSmart SP is only designed to charge MP3 players and smart phones.

Using the USB Power Port for Device Charging

- Do not expose the unit to dust, water, or extreme temperatures.

- Do not attempt to disassemble the product.

- If you are experiencing problems with the product, please contact the

manufacturer or retailer.

Cautions

Product Specications

Audio Input: 3.5mm audio cable

Frequency Response: 20Hz – 16KHz

FM frequency: 88.1-107.9MHz

Input: DC 12V

USB output: DC 5.0V, 2.0A

Weight: 0.45 lbs(7.2 ounces)

2011 ACCESSORY POWER

All trademarks and brand names are the property of their owners.

iPod and iPhone are trademarks of Apple Inc., registered in the U.S.

and other countries.

Accessory Power GOgroove FlexSmart SP User manual

Brand: Accessory Power

Model: GOgroove FlexSmart SP

Category: FM transmitters

Type: User manual

Download PDF

report

Accessory Power GOgroove FlexSmart SP User manual

Accessory Power GOgroove FlexSmart SP User manual

Related papers

Other documents