Shading Systems Designer-Series Installation guide

Brand: Shading Systems

Model: Designer-Series

Type: Installation guide

Shading Systems

Chain-free Roller Shade

Installation Instructions

No: 070376 – 01/24 rev. 1

Catalog Numbers • Les Numéros de Catalogue • Los Números de Catálogo:

Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China

DESCRIPTION

The Chain-free Roller Shade provides a safe, chainless solution with simple control. It is equipped with internal components, including a

spring-assist assembly and a calibrated braking system, which enable the user to have an effortless experience. In addition, it uses the

Designer Series and Spec Series brackets shared by the automated products.

Tools Needed for Installation

• Pencil

• Power Drill

• Level

• (4) Wall Anchors

• 3/32” (2mm) Drill Bit

• Screw Driver

• (4) #6 (M3.5) Screws

• Measuring Tape

INSTALLATION

Find the shades mounting style on the order form. This is especially important when using Spec Series Brackets vs. Designer Series

brackets. Then determine the roll type. Standard roll shades will roll off the back of the shade and reverse roll will roll off the front.

Install the brackets using the installation instruction included with the brackets.

Once the brackets are installed, hang the shade inside of the bracket in the correct roll direction.

Use a level to ensure the shade is sitting level, and adjust the brackets if needed.

Preloading

Preloading is necessary for the shade to roll up.

1. With the shade in the brackets, pull it down 12 inches. The mechanism inside will lock position into position, allowing the shade to

hang.

Pull Down

2. Disengage shade from brackets and manually roll the fabric onto the tube

3. Re-install the shade into the brackets.

NOTE: Upper limits are not adjustable on Chain-free roller shades.

No. 070376 – 01/24 rev. 1

Limited Lifetime Warranty

Legrand offers a Limited Lifetime Warranty

for window shade product, and/or specific

components of the window shade product to be

free from defects in materials and workmanship

under normal use. There are no obligations or

liabilities on the part of Legrand for consequential

damages arising out of, or in connection with,

the use or performance of this product or other

indirect damages with respect to loss of property,

revenue or profit, or cost of removal, installation or

reinstallation. For full warranty details visit https://

www.legrand.us/shading-warranty

Garantie à vie limitée

Legrand offre une garantie à vie limitée pour

le produit de store de fenêtre et / ou des

composants spécifiques du produit de store

de fenêtre pour être exempt de défauts de

matériaux et de fabrication dans des conditions

normales d’utilisation. Il n’y a aucune obligation

ou responsabilité de la part de Legrand pour

les dommages consécutifs résultant de, ou en

relation avec, l’utilisation ou la performance de ce

produit ou d’autres dommages indirects en ce qui

concerne la perte de propriété, de revenu ou de

profit, ou le coût de l’enlèvement, installation ou

réinstallation. Pour plus de détails sur la garantie,

visitez https://www.legrand.us/shading-warranty

Garantia limitada de por vida

Legrand ofrece una garantía limitada de por

vida para el producto de sombra de ventana,

y / o componentes específicos del producto de

sombra de ventana para estar libre de defectos

en materiales y mano de obra bajo uso normal. No

hay obligaciones ni responsabilidades por parte de

Legrand por daños consecuentes que surjan de,

o en conexión con, el uso o desempeño de este

producto u otros daños indirectos con respecto a

la pérdida de propiedad, ingresos o ganancias,

o costo de remoción, instalación o reinstalación

Para obtener detalles completos de la garantía,

visite https://www.legrand.us/shading-warranty

WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA

Commercial Technical Support:

1-800-879-8585

www.legrand.us/shading-systems

TROUBLESHOOTING

I cannot set the upper limit on my shade Chain-free shades do not have the ability to adjust the upper limit.

My shade has little tension and will not roll up all of the way Apply pre-winds using the Pre-Winding Instructions below.

My shade is raising too fast Remove pre-winds using the instructions below.

NOTE: If you notice something out of the ordinary with the look or performance of your shade, please take a photograph/video of the

concern, and advise our Customer Service team.

Pre-winding Instructions

1. Remove the shade from the bracket at the end of the shade that has the power spring(s). You can leave the shade attached to the

bracket at the other end.

2. Hook the prewind wrench around the shaft coming out of the roller shade and rotate the wrench in the opposite direction that the

material comes off of the shade.

3. Remove the shade from the bracket at the end of the shade that has the power spring(s). You can leave the shade attached to the

bracket at the other end.

4. Hook the prewind wrench around the shaft coming out of the roller shade and rotate the wrench in the opposite direction that the

material comes off of the shade.

Removing Pre-winds

1. Between the shade and the bracket, hook the wrench around the shaft coming out of the shade.

2. While firmly grasping the wrench lift the shade up and out of the bracket.

3. Allow the wrench to rotate until the tension is off of the wrench. Be careful not to let the wrench go.

4. Remove the wrench and re-seat the shade back into the bracket.

Shading Systems Designer-Series Installation guide

Brand: Shading Systems

Model: Designer-Series

Type: Installation guide

Download PDF

report

in other languages

français: Shading Systems Designer-Series Guide d'installation

Shading Systems Designer-Series Installation guide

Shading Systems Designer-Series Installation guide

in other languages

Related papers

Other documents