ROOMS TO GO 73761314 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the EASTLAKE SHGP Sofa Table. This document includes a parts list and detailed steps to guide you through the assembly process. The instructions detail how to connect the table tops using bolts, washers, and an Allen key to attach the legs. I'm ready to answer any questions you have about assembling your new table.
  • What should I do before assembling the sofa table?
    What is the first step in assembling the sofa table?
    What tool is needed to tighten the bolts?
ASSEMBLY INSTRUCTIONS
SHGP EASTLAKE SOFA TABLE
Manufactured for Rooms To Go SKU 73761314
Thanks for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside
the carton during shipment. Identify and count all parts and compare with the Hardware List below
Caution: Loosely pre-assemble all the bolts first. Do not fully turn until all bolts are inserted into the proper holes.
Step 1: Place the Top1(Part A) on a clean, soft surface as a blanket or carpet. Assemble the Legs(Part C&D) to the Top1 by Bolt(Part E)
and Washer(Part F), tighten with Allen Key(Part Z).
Step 2: Assemble the Top2(Part B) to the Legs(Part C&D) by Bolt(PartE) and Washer(Part F), tighten with Allen Key (Part Z).
A
C
C
D
D
B
Step 3: After tightening all bolts, your product is ready for use.
PARTS LIST PARTS LIST
NO.: PIC DESC QTY NO.: PIC DESC QTY
A Top1 1pc E Bolt(M6*65) 16 pcs
B Top2 1pc F Washer 16 pcs
C Leg1 2 pcs Z Allen Key 1pc
D Leg2 2 pcs
Periodically check and make sure all bolts are fully tightened.
/