cindy crawford 7921002P Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the HAMPTON'S COVE Fire Pit model 79110020+79210022. This document provides a parts list along with detailed step-by-step instructions for assembling the fire pit. It guides you from placing the table base to securing the top. I'm ready to assist with any questions you might have about the assembly process or parts.
  • What should I do before starting the assembly?
    What is the first step in assembly?
    What tool is needed for assembly?
ASSEMBLY INSTRUCTIONS
SHGP HAMPTON'S COVE FIRE PIT
Manufactured for Rooms To Go SKU 79110020+79210022
Thanks for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come
loose inside the carton during shipment. Identify and count all parts and compare with the Hardware List below
Step 1: Place the Table Base (Part B) on a clean, soft surface as a blanket or carpet. Remove the Fire Pot(Part J) from the Table
base by loosening bolt (Part K) and washers (Part F)with Allen key (Part C).
Step 2: Assemble the Ceramic washer (Part G) between the Fire Pot(Part J) and table base by Bolt(Part K) and Washers(Part F),
tighten them with Allen key (Part C).
Page 1,total 3
Step 3: Assemble the Top (Part A) to the Base by Bolt(M6*25) (Part E) and Washer(Φ16*Φ6.5)(Part F), tighten them with Allen key
(Part C).
Step 4: After tightening all bolts, your product is ready for use.
Page 2,total 3
PARTS LIST PARTS LIST
NO.: PIC DESC QTY NO.: PIC DESC QTY
A Table Top 1pc E Bolt(M6*25) 4pcs
B Table Base 1pc F Washer 4pcs
C Allen key 1pc G Washer 4pcs
D Burner Lid 1pc
Periodically check and make sure all bolts are fully tightened.
Page 3,total 3
/