Pairing
Connected
Disconnected
Music Playing
Music Pause
Standby Mode
Incoming Call
Bluetooth Over-Ear
Headphones With ANC
USER’S MANUAL
LED Indicator Charging Indicator Light
Control Functions
First Time Set Up
PLAY / PAUSE
Press Once
VOLUME DOWN
Press Once
ANSWER CALL
Press Once
SIRI
Triple Click
REJECT CALL
Hold For 2 Secs
VOLUME UP
Press Once
PREVIOUS TRACK
Hold For 2 Secs
SKIP TRACK
Hold For 2 Secs
USB-C Charging Port
LED Indicator
ON / OFF
Hold For 3 Secs
Charging: RED light stays on
Fully Charged: RED light turns off
MUSIC
Flashing RED & BLUE
Blue light stays on
Flashing RED & BLUE
Blue light flash 1 time per 3 seconds
Blue light stays on (After 3 Secs based on
Android system/7 Secs based on iOS system)
Blue light stays on
Blue light stays on when playing or pause
status. Blue light flash 1 time per 3 Secs
when power on status
HAND UP CALL
Press Once
LAST REDIAL
Double Click
VOICE ASSIST MANUAL ON/OFF
ANC FUNCTIONS
ANC OFF
Push to the “OFF”
ANC ON
OFF ON
ANC
OFF ON
ANC
Push to the“ON”
VOLUME
PHONE CALLS
LED Indicator
· Activate Bluetooth Function
· Search & Select device name
· Pair
Step 1
Step 2
Wired Mode Wireless Mode
· Long press the “ ” button
for 3 seconds to power on
No. Function Functional Requirements Voice Prompt Indicator Light
Power On1
2
3
4
5
6
Long press the " " button
for 3 seconds.
Power On Blue light stays on 1
second then flashing
Blue & Red
Power Off Long press the " " button
for 3 seconds.
Power Off Red light flash 2 times
Pairing
Mode
The device automatically
enters the pairing mode
after power on
Pairing Flashing Blue & Red
12 Automatic
Reconnect
After Power
On
Long press " " button for
3 seconds,the device will
be automatic pair with the
last connection.
Connected Blue light stays on
13 Over-
distance
Disconnected
The device will disconnect
from the phone when it
over-distance
Disconnected Flashing Blue & Red
10 Volume
Up
Press once "+" button DU DU
(Maximum)
Pairing Su-
ccessfully -
-
-
Connected Blue light stays on
BT Discon-
nected
Disconnected Flashing Blue & Red
Press once the " " button
Music Play Blue light flash 1
time per 3 seconds
7-
Press once the " " button
Music
Pause
Blue light stays on after
3 seconds (Based on
Andriod system) Blue
light keeps on after 7
seconds (Based on
iOS system
8- -
- -
Long press "+" button for
2 seconds
Next Track
9--
-
11 Volume
Down
Press once "-" button DU DU
(Minimum) -
Long press "-" button for
2 seconds
Previous
Track
No. Function Functional Requirements Voice Prompt Indicator Light
Over-
distance
Reconnect
14 If the device has been
disconnected from your
phone for less than 5
minutes, they can reconnect
again if it comes back
within the valid range.
Connected Blue light stays on
Disconne-
cted
15 Long press the "+" and "-"
buttons for 2 seconds at the
same time, theBluetooth will
be disconnected, and if you
restart the device after
disconnection, the device
will be automatically
connected.
Disconnected Flashing Blue & Red
Calls
reminding
17 Press once the " " button
when power on status.
Press once the " " button
when playing or
pause status.
Incoming Call
Incoming Call
Battery Low
(Every 20
seconds)
Blue light flash 1 time
per 3 seconds
Blue light stays on
Blue light flash 1 time
per 3 seconds
Red light flash 1 time
per 10 seconds
Last Redial16 Double click " " button.
Press once the " " button
--
--
Call Status18
-
-
-
Answer Call19
Press once the " " button -
DU
Hand Up
Call
20
Long press the " " button
for 2 seconds. -
- -
Reject Call21
It will prompt when the
battery voltage is low to 3.4V.
Low Battery
Clarm
22
Red light stays on
Charging
Mode
24
Power off automatically
when the battery voltage
islower than 3.3V.
Low Battery
Power Off
Automatic
23
No. Function Functional Requirements Voice Prompt Indicator Light
Fully
Charged
25 -
-
-
Red light flash 2 times
Red light off
Green light stays on
Charging
Automatic
Power Off
26 Plug in the charging cable
to charge when power on.
Power off
-
-
AUX-in
Mode
27 Plug in the aux-in cable
and the device will power
off automatically.
Power off
Automatic
Power Off
28 If the device is not
connected within five
minutes, it will
automatically shut down
Power off
ANC On29 Push up the button to
the "On"
Green light offANC Off30 Push down the button to
the "OFF"
-Blue light stays onActivate Siri31 Triple click " " button
Line-in Mode
To listen via the AUX-in cable, insert the cable into the line-
out port on the right earcup. If you would like to listen to
music wirelessly, you need to remove the AUX-in cable and
turn on the wireless mode.
When the battery is running low, the LED indicator light will
start flashing red and the headphones will issue an audible
warning. To recharge the headphones, insert the USB
charging cable into the port on the earcup and connect with
a compatible power source (laptop, computer, or via a mains
plug adapter). To indicate that the headphones are charging,
the LED indicator light will show static red turns off when
fully charged.
Technical Specifications
1. Profiles supported: HFP/AVRCP/A2DP/SMP
2. Working range: 8-10M
3. Resistance: 32Ω±15%
4. Sensitivity: 108±3dB
5. Frequency range: 20HZ-20KHZ
6. Charging voltage: 5V
7. Charging current: 500mAh
8. Driver size: 40mm
Functions & Features
Overview
1. Wireless compatible with iOS/Android
2. Up to 16-18 hour total playtime (About 2-3 hours
charging time).
3. Built-in microphone.
4. Strong, adjustable design for comfort and durability.
5. Foldable, portable design.
User Instructions
Wireless Mode
Hold “ ” for 3 seconds to turn on the headphones. The
LED indicator light will flash red and blue alternately until the
headphones are successfully connected. Ensure that the
headphones are no more than 10 meters away from the device
you want to pair. Use the Bluetooth search list on your device.
To confrm you have paired the headphones successfully with
your device, the LED indicator light will show static blue.
Power Status
When the headphones are connected with an iOS device
(and SOME Android devices), the current power status of the
headphones will be shown in the upper right corner of the
device screen.
Turn On
To turn ON the wireless headphones, press and hold “ “
for 3 seconds. The LED indicator light will flash red and blue
alternately until the headphones are successfully connected.
Turn Off
To turn OFF the wireless headphones, press and hold ” “
for 3 seconds. The headphones will turn off after the red LED
light has flashing twice.
Included
3.5mm Aux-
in Cable
ANC Mute On/Off
Microphone
ANC & Charging
Indicator
Type-C Charging Port
Volume Down/
Previous Track
Multi-function
Button Volume Up/
Next Track
1 x Headphones
1 x Aux-in cable
1 x Type C charging cable
1 x Adapter
1 x Carry pouch
1 x User manual