Kids LED Light
Bluetooth Headphones
USER’S MANUAL
Front Back
Front Back
Wired Mode Wireless Mode
· Push “ ” button to
the ON
Pairing
Connected
Disconnected
Music Playing
Music Pause
Standby Mode
Incoming Call
LED Indicator
Flashing RED & BLUE
Blue light stays on
Flashing RED & BLUE
Blue light flash 1 time per 3 seconds
Blue light stays on (After 3 Secs based on
Android system/7 Secs based on iOS system)
Blue light stays on
Blue light stays on when playing or pause
status. Blue light flash 1 time per 3 Secs
when power on status
USB-C Charging Port
LED Indicator
LED Indicator
Charging: RED light stays on
Fully Charged: RED light turns off
· Activate Bluetooth Function
· Search & Select device name
· Pair
Step 1
Step 2
PLAY / PAUSE
Press Once
VOLUME DOWN
Press Once
ANSWER CALL
Press Once
SIRI
Triple Click
REJECT CALL
Hold For 2 Secs
VOLUME UP
Press Once
PREVIOUS TRACK
Hold For 2 Secs
SKIP TRACK
Hold For 2 Secs
MUSIC
HAND UP CALL
Press Once
LAST REDIAL
Double Click
VOICE ASSIST
LIGHT ON/OFF
LIGHT OFF
Double Click
LIGHT ON
Double Click
VOLUME
PHONE CALLS
No. Function Functional Requirements Voice Prompt Indicator Light
Power On1
2
3
4
5
6
Push " " button to
the ON
Power On Blue light stays on 1
second then flashing
Blue & Red
Power Off Push " " button to
the OFF
Pairing
Mode
The device automatically
enters the pairing mode
after power on
Pairing Flashing Blue & Red
12 Automatic
Reconnect
After Power
On
Push " " button to
the ON,the device will be
automatic pair with the
last connection
Connected Blue light stays on
13 Over-
distance
Disconnected
The device will disconnect
from the phone when it
over-distance
Disconnected Flashing Blue & Red
10 Volume
Up
Press once " " button DU DU
(Maximum)
Pairing Su-
ccessfully -
-
- -
Connected Blue light stays on
BT Discon-
nected
Disconnected Flashing Blue & Red
Press once the " "
button
Music Play Blue light flash 1
time per 3 seconds
7
-
-
Press once the " "
button
Music
Pause
Blue light stays on after
3 seconds (Based on
Andriod system) Blue
light keeps on after 7
seconds (Based on
iOS system
8- -
Long press " " button
for 2 seconds
Next Track
9--
-
11 Volume
Down
Press once " " button DU DU
(Minimum) -
Long press " " button
for 2 seconds
Previous
Track
No. Function Functional Requirements Voice Prompt Indicator Light
Over-
distance
Reconnect
14 If the device has been
disconnected from your
phone for less than 5
minutes, they can reconnect
again if it comes back
within the valid range.
Four click " " button
Connected Blue light stays on
15
17
Battery Low
(Every 20
seconds)
Blue light flash 1 time
per 3 seconds
Blue light flash 1 time
per 3 seconds
Blue light stays on
Red light flash 1 time
per 10 seconds
Last Redial
16
Press once the " "
button when power on status
Press once the " "
button when playing or
pause status
--
-
-
Call Status
18
Incoming call
Incoming call
-
-
-
Answer Call
19
Press once the " "
button
-
DU
DU
Hand Up
Call
20
Long press the " "
button for 2 seconds. -
Power Off -
Reject Call
21
It will prompt when the
battery voltage is low to 3.4V.
Low Battery
Clarm
22 Red light stays on
Red light stays on
Red light off
Charging
Mode
24
25
Power off automatically
when the battery voltage
islower than 3.3V.
Low Battery
Power Off
Automatic
23
No. Function Functional Requirements Voice Prompt Indicator Light
Fully
Charged --
-
-
-
Red light flash 2 times
RGB light cycle flash
display
Red light flash 2 times
Charging
Automatic
Power Off
26
Plug in the charging cable
to charge when power on.
Power off
AUX-in
Mode
27
Plug in the aux-in cable
and the device will power
off automatically.
Power off
Automatic
Power Off
28
If the device is not
connected within five
minutes, it will
automatically shut down
Power off
Light On
29
Double click " " button
Light Off
Blue light stays onActivate Siri
Double click " " button
Double click " " button
On/Off
Function Button
LED Light Indicator
Line-in Mode
To listen via the AUX-in cable, insert the cable into the line-
out port on the right earcup. If you would like to listen to
music wirelessly, you need to remove the AUX-in cable and
turn on the wireless mode.
When the battery is running low, the LED indicator light will
start flashing red and the headphones will issue an audible
warning. To recharge the headphones, insert the USB
charging cable into the port on the earcup and connect with
a compatible power source (laptop, computer, or via a mains
plug adapter). To indicate that the headphones are charging,
the LED indicator light will show static red turns off when
fully charged.
Overview
Power Status
When the headphones are connected with an iOS device
(and SOME Android devices), the current power status of the
headphones will be shown in the upper right corner of the
device screen.
Included
1 x Headphones
1 x Aux-in cable
1 x Type C charging cable
1 x Adapter
1 x Carry pouch
1 x User manual
3.5mm Aux-
in Cable
Microphone
Type-C
Charging Port
Volume Down/
Previous Track
Multi-function
Button
Volume Up/
Next Track
LED Indicator Charging Indicator Light
Control Functions
First Time Set Up
Technical Specifications
Functions & Features
Wireless Mode
1. Profiles supported: HFP/AVRCP/A2DP/SMP
2. Working range: 8-10M
3. Resistance: 32Ω±15%
4. Sensitivity: 95±3dB
5. Frequency range: 20HZ-20KHZ
6. Charging voltage: 5V
7. Charging current: 500mAh
8. Driver size: 40mm
1. Wireless compatible with iOS/Android
2. Up to 13-14 hours total playtime with LEDlight (About 2-3
hours charging time).
3. Built-in microphone.
4. Strong, adjustable design for comfort and durability.
5. Foldable, portable design.
User Instructions
Turn On
To turn ON the wireless headphones, press the “ ”
function button. The LED indicator light will flash red and blue
alternately until the headphones are successfully connected.
Turn Off
To turn OFF the wireless headphones, press the “ ”
function button.
Press the “ ” function button to turn on. The LED
indicator light will flash red and blue alternately until the
headphones are successfully connected. Ensure that the
headphones are no more than 10 meters away from the
device you want to pair. Used the Bluetooth search list on
your device to find and select the device name to pair with the
headphones. To confirm you have paired the headphones
successfully with your device, the LED indicator light will
show static blue.
1
Dynalink C9034A Operating instructions
Modal MD-HPBT01 User manual
Kygo A11/800 User manual
Monster RJE190653 User manual
Treblab Z7 Pro User manual
Turtle Beach EAR FORCE i30 User manual
Mee Audio Connect T1CMA Bluetooth Wireless Headphone System User manual
Plantronics 202652-04 User guide
Turtle Beach Elite 800 User manual
Poly Voyager Focus 2 UC Series User guide
