RC4WD Black Hawk Body Set User manual

RC4WD Black Hawk Body Set

for 1/18 Gelande II

Side Cutters Hobby Knife

Body Reamer

1

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Instruction Manual Symbols Key

Tips for Assembly

Use good quality hex drivers to avoid stripping screw heads.

Open kit bags in order of assembly steps.

Use “Step” index for quantity and size of hardware to be used for assembly step.

Do not overtighten screws.

Use thread lock sparingly.

We recommend using Foam Safe CA glue or a plastic solvent glue.

RC4WD non-electrical products are warranted to be free of defects in materials and

workmanship when new. Our limited warranty does not coverdamages due to normal

wear and tear, user error of assembly or installation, user modifications, user's failure

to perform routine maintenance, addition of aftermarket parts or option parts. This

warranty lasts 30 days after arrival for original purchaser. In the event of a defect

under this warranty, RC4WD will, at our discretion, replace the product, provided our

inspection indicates that an original defect exists. RC4WD reserves the right to

replace any product which is no longer available with a product of comparable value

and function. If RC4WD determines the repair is not covered under warranty guidelines,

we will contact you to discuss your options. If you have any questions, please contact

us via email at [email protected].

RC4WD warranties its electronics for 30 days from date of arrival. This covers all

electrical items except items that are already noted on the individual product page.

Warranty

Glue

2

RC4WD Black Hawk

Body Set for 1/18 Gelande II

3

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Step 2

Step 1

4

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Step 4

Step 3

150-0217

M2.5 x 6mm BHSTS

X4

150-0217

5

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Step 6

Step 5

150-0245

M2.5 x 4mm BHSTS

X1

150-0245

6

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Step 8

Step 7

7

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Step10

Step 9 Align holes in center of window piece with pegs on the inside

of the body for proper window alignment.

150-0042

M2 x 4mm BHCS

X2

150-0245

M2.5 x 4mm BHSTS

X2

150-0245

150-0042 150-0042

8

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Take care to align grille properly

before applying glue.

Step12

Step11

150-0217

M2.5 x 6mm BHSTS

X2

150-0217

M2.5 x 6mm BHSTS

X4

9

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Step14

Step13

Holes may require

body reamer. Take

care to not force

the pegs in holes

as this may break

them off.

Holes may require

body reamer. Take

care to not force

the pegs in holes

as this may break

them off.

10

RC4WD Black Hawk

Body Set for 1/18 Gelande II

Step16

Step15

Holes may require

body reamer. Take

care to not force

the pegs in holes

as this may break

them off.

Z-E0102 LED Basic Lighting System for 1/18 Black Hawk Body Set

Partes opcionales / Pièces en option / Optionale teile

Optional Parts

11

RC4WD Black Hawk

Body Set for 1/18 Gelande II

720 N. Gateway St.

Visalia, CA 93291

Web: www.rc4wd.com - Email: [email protected]

www.rc4wd.com

100-0116

RC4WD Black Hawk Body Set User manual

RC4WD Black Hawk Body Set User manual

Related papers

Other documents