INSTRUCTIONS FOR USE
METROMAX DRYING RACK UNIT
Pan & Tray Rack: (2) Stainless Drop-in Shelves, (1) Tray Rack
PR48VX3
DR36S / XDR36S
DR48S / XDR48S
DR60S / XDR60S
XTR2436XE
XTR2448XE
XTR2460XE
18x26 Bun Pan
(Evenly Placed)
Groove#5
Groove#24
Groove#43
Groove#62
26
18
PR48X3
XTR2436XE
XTR2448XE
XTR2460XE
DR36S
DR48S
DR60S
Place 18x26 Bun Pans and 12x20 Steam Pans Evenly on Racks
Groove#51
Groove#28
Groove#74
Place 18x26 Bun Pans and 12x20 Steam Pans Evenly on Racks
PR48VX3-XDR (Includes drip tray accessory)
DR36S
DR48S
DR60S
Groove#5
Groove#30
Groove#46
Groove#62
18x26 Bun Pan
(Evenly Placed)
26
18
Bottom shelf must be 6” off oor.
XTR2436XE
XTR2448XE
XTR2460XE
TOP: Shelf with plastic
shelf mats
NOTE: The tray rack may also be positioned on the bottom shelf. See
PR48VX3-XDR for groove positions to allow clearance for full size sheet pans.
Alternate Conguration
PR48VX3
MAX4-PR48VX3
Tray Rack on Top
MAX4-PR48VX3
METROMAX DRYING RACK UNIT — INSTRUCTIONS FOR USE
2
www.metro.com
INSTR-MAXA
REV 05/19
XTR2436XE
XTR2448XE
XTR2460XE
XTR2436XEA
XTR2448XEA
XTR2460XEA
Place 18x26 Bun Pan and 12x20 Steam Pan Evenly on Racks
XTR2436XE
XTR2448XE
XTR2460XE
XTR2436XEA
XTR2448XEA
XTR2460XEA
18x26 Bun Pan
(Evenly Placed)
12x20 Steam Pan
(Evenly Placed)
26
18
20
12
Groove#5
Groove#62
Groove#28
Groove#51
Groove#74
PR48VX4
PR48X4
18x26 Bun Pan
(Evenly Placed)
12x20 Steam Pan
(Evenly Placed)
Groove#23
Groove#41
Tray and Pan Rack: (2) Tray Racks, (2) Pan Racks
Place 18x26 Bun Pans and 12x20 Steam Pans Evenly on Racks
PR48VX4-XDR
XTR2436XEA
XTR2448XEA
XTR2460XEA
Groove#5
Groove#23
Groove#41
XTR2436XE
XTR2448XE
XTR2460XE
Groove#62
12x20 Steam Pan
(Evenly Placed)
20
12
12x20 Steam Pan
(Evenly Placed)
26
18
MAX4-PR48VX4
Bottom shelf must be 6” off oor.
METROMAX DRYING RACK UNIT — INSTRUCTIONS FOR USE
3
www.metro.com
INSTR-MAXA
REV 05/19
Tray Rack: (3) Tray Racks
THIS COMPLETES INSTALLATION OF THE METROMAX DRYING RACK UNIT
MAX4-PR48VX2
PR48VX2-XDR
XTR2436XE
XTR2448XE
XTR2460XE
XTR2436XE
XTR2448XE
XTR2460XE
Minimum Groove #49,
For more room, Groove #53
Minimum Groove #28,
For more room, Groove #30
Note: Steam pan that mounts to the drip tray
accessory is not provided.
Groove#5
Groove#5
Minimum Groove #49,
For more room, Groove #53
Minimum Groove #28,
For more room, Groove #30
METROMAX DRYING RACK UNIT — INSTRUCTIONS FOR USE
4
www.metro.com
INSTR-MAXA
REV 05/19
MetroMax i
®
- Installation of Stainless Steel Drop-in Rack
Model Numbers: DR36S, DR48S
MetroMax i
®
- Installation of top-mount drying racks
Tray racks - XTR2436XE, XTR2448XE, XTR2460XE
Pan racks - XTR2436XEA, XTR2448XEA, XTR2460XEA
1
A
2
B
Tray Drying
Rack
SS Drop-in
Rack
1
2
SS Drop-in
Rack
Mounts to full shelf (A) or open frame (B)
Stainless steel drop-ins mount to an open shelf frame
Model Number: DR60S [60" (1524mm) length]
Plastic
Extrusion
METROMAX DRYING RACK UNIT — INSTRUCTIONS FOR USE
5
www.metro.com
INSTR-MAXA
REV 05/19
Tray Drying
Rack
On MetroMax 4, the tray and pan racks must
mount on an open shelf frame.
A MetroMax 4 shelf can be converted to an
open frame by removing the shelf mat
sections.
MetroMax 4
®
- Installation of Stainless Steel Drop-in Rack
Model Numbers: MAX4-DR36S, MAX4-DR48S, MAX4-DR60S
1
2
SS Drop-in
Rack
MetroMax 4
Attention-Drying Rack accessories for MetroMax 4 must mount on an open shelf frame.
MetroMax 4
®
- Installation of Tray and Pan Racks
Model Numbers:
Tray racks- XTR2436XE, XTR2448XE, XTR2460XE
Pan racks- XTR2436XEA, XTR2448XEA, XTR2460XEA
METROMAX DRYING RACK UNIT — INSTRUCTIONS FOR USE
6
www.metro.com
INSTR-MAXA
REV 05/19
Compatibility of the top-mount drying racks with Metro shelving.
Tray racks – XTR2436XE, XTR2448XE, XTR2460XE
Pan racks – XTR2436XEA, XTR2448XEA, XTR2460XEA
Super Erecta Shelving
Super Adjustable Super Erecta
Super Erecta Pro ShelvingMetroMax Q Shelving
Tray Drying
Rack
Tray Drying
Rack
Tray Drying
Rack
Tray Drying
Rack
METROMAX DRYING RACK UNIT — INSTRUCTIONS FOR USE
7
www.metro.com
INSTR-MAXA
REV 05/19
THIS SECTION INTENTIONALLY LEFT BLANK
Weight Capacity:
The weight of any tier using a ware drying accessory shall not exceed 200 lbs (90.71 Kg), and the total weight of any
assembled drying unit must not exceed the weight capacity of the shelving system being used.
Usage Guidelines
A. Clean and Sanitize using a 4-Step Process:
1.
Clean
2.
Rinse
3.
Sanitize
4.
Air Dry
B. Always ensure cleaning and sanitizing products are recommended for use on plastics, epoxy coated, stainless, plated
and galvanized steel. Avoid using abrasive cleaners, harsh chemicals, stiff brushes and scouring pads as these will void
the warranty.
C. The entire unit may be rinsed with a hose or low pressure power washer. Intermittent exposure is limited to 200°F (93°C)
Please note: This product is NOT to be used with an automated high temperature cart washing system of autoclave.
4 xaMorteMi xaMorteM
3XV84RP-4XAM*3XV84RPRDX-3XV84RP
Component
Description
Qty Component
Description
Qty Component
Description
Qty
MX2448G
Max i shelf
1 MX2448G
Max i shelf
2 MAX4-2448G
Max 4 shelf
1
M4F2448
open shelf frame
3 M4F2448
open shelf frame
2 MAX4-F2448
open shelf frame
3
MX63UP
polymer post
4 MX63UP
polymer post
4 MX63UP
polymer post
4
DR48S
SS drop-in rack (Max i)
2 DR48S
SS drop-in rack (Max i)
2 MAX4-DR48S
SS drop-in rack (Max 4)
2
XTR2448XE
tray rack
1 XTR2448XE
tray rack
1 XTR2448XE
tray rack
1
5PCBX
polymer brake caster
2 5PCBX
polymer brake caster
25PCBX
polymer brake caster
2
5PCX
polymer swivel caster
2 5PCX
polymer swivel caster
25PCX
polymer swivel caster
2
XDRIP
drip tray
1
3XV63RP-4XAMRDX-3XV63RP
Component
Description
Qty Component
Description
Qty
MX2436G
Max i shelf
G6342-4XAM1
Max 4 shelf
1
M4F2436
open shelf frame
6342F-4XAM3
open shelf frame
3
MX63UP
polymer post
PU36XM4
polymer post
4
DR36S
SS drop-in rack (Max i)
S63RD-4XAM2
SS drop-in rack (Max 4)
2
XTR2436XE
tray rack
EX6342RTX1
tray rack
1
5PCBX
polymer brake caster
XBCP52
polymer brake caster
2
5PCX
polymer swivel caster
XCP52
polymer swivel caster
2
XDRIP
drip tray
1
4XV84RP-4XAM*4XV84RPRDX-4XV84RP
Component
Description
Qty Component
Description
Qty Component
Description
ytQ
M4F2448
open shelf frame
4 MX2448G
Max i shelf
4 MAX4-F2448
open shelf frame
4
MX63UP
polymer post
4 MX63UP
polymer post
4 MX63UP
polymer post
4
XTR2448XE
tray rack
2 XTR2448XE
tray rack
2 XTR2448XE
tray rack
2
XTR2448XEA
pan rack
2 XTR2448XEA
pan rack
2 XTR2448XEA
pan rack
2
5PCBX
polymer brake caster
2 5PCBX
polymer brake caster
25PCBX
polymer brake caster
2
5PCX
polymer swivel caster
2 5PCX
polymer swivel caster
25PCX
polymer swivel caster
2
XDRIP
drip tray
1
PR36VX4-XDR 4XV63RP-4XAM
Component
Description
Qty Component
Description
Qty
M4F2436
open shelf frame
6342F-4XAM4
open shelf frame
4
MX63UP
polymer post
PU36XM4
polymer post
4
XTR2436XE
tray rack
EX6342RTX2
tray rack
2
XTR2436XEA
pan rack
AEX6342RTX2
pan rack
2
5PCBX
polymer brake caster
XBCP52
polymer brake caster
2
5PCX
polymer swivel caster
XCP52
polymer swivel caster
2
XDRIP
drip tray
1
PR48VX2-XDR 2XV84RP-4XAM
Component
Description
Qty ytQtnenopmoC
M4F2448
open shelf frame
8442F-4XAM3
open shelf frame
3
MX63UP
polymer post
PU36XM4
polymer post
4
XTR2448XE
tray rack
EX8442RTX3
tray rack
3
5PCX
polymer brake caster
XCP52
polymer brake caster
2
5PCBX
polymer swivel caster
XBCP52
polymer swivel caster
2
XDRIP
drip tray
1
PR36VX2-XDR
MAX4-PR36VX2
M4F2436
open shelf frame
6342F-4XAM3
open shelf frame
3
MX63UP
polymer post
PU36XM4
polymer post
4
5PCX
tray rack
XCP52
tray rack
2
5PCBX
polymer brake caster
XBCP52
polymer brake caster
2
XTR2436XE
polymer swivel caster
EX6342RTX3
polymer swivel caster
3
XDRIP
drip tray
1
*NOTE PR48X3 and PR48X4 stationary models: use (4) MX74P pos ts in place of the MX63UP posts; stationary models do not include casters.
*NOTE PR48X3 and PR48X4 stationary models: use (4) MX74P pos ts in place of the MX63UP posts; stationary models do not include casters.
Description
Component
Description
Qty
Component
Description
Qty
© 2019 InterMetro Industries Corporation, Wilkes-Barre, PA 18705
INSTR-MAXA REV 05/19
* Save this document for future application, load rating and/or safety reference.
Part List
/