Intermetro 9996X Installation guide

INST-9996X

11/04

1. Remove the shelf mats from the shelf frame.

2. Position the plastic and metal clips onto the shelf frame and lock into place as shown

in Figs. 1 & 2. The tab on the outside back of the metal clip should lock into the horizontal

flange of the plastic clip as shown on the inside view in Fig. 2. Note – the S-Hook clips should

be spaced as far apart on the shelf frame as possible.

3. Insert the S-Hooks as shown in Fig’s. 1 & 2.

4. Insert the plastic hole plugs into the shelf collars as shown on pg. 4 of the MetroMax assembly

instruction.

5. Re-install the shelf mats onto the shelf frame.

9996X MetroMax Intermediate S-Hook Kit

INSTALLATION

INSTRUCTIONS