1. Remove and discard the existing leveling bolt
that comes with the post (Super Erecta only).
2. Mount “B” plate casters as shown with the
caster hardware provided.
3. Align the bottom of the posts (threaded insert
(SES) or levelling foot (MetroMax & MetroMax
Q) over the large holes in “Z” channel frame.
(Make sure levelling feet for MetroMax &
MetroMax Q are screwed all the way in before
assembling).
4. Place a flat washer and lockwasher onto the
3
/
8
-16 hex head bolt (all provided in the dolly
hardware bag) and insert thru the underside of
the dolly frame and into the post as shown.
Make sure that the washers are positioned
as shown.
5. Tighten all bolts securely as required.
6. Add shim plate #DOLLYSHIMB5P quantity 2
per caster over the caster plate, while using a
stainless dolly with B5PGSA/ B5PBGSA.
ASSEMBLY INSTRUCTION FOR
MOUNTING POST TO DOLLY -
“B” PLATE CASTER
This assembly instruction
applies to “B” plate casters only —
please see reverse side for “C”
plate applications.
NOTE:
L01-236
REV. C 06/18
Information and specifications are subject to change
without notice. Please confirm at time of order.
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-992-1776
Visit Our Web Site: www.metro.com
SHIM PLATE
(See Note #6)
1. Remove and discard the existing leveling bolt
that comes with the post (Super Erecta only).
2. Mount “C” plate casters as shown with the
caster hardware provided.
3. Align the bottom of the posts (threaded insert
(SES) or levelling foot (MetroMax & MetroMax
Q) over the large holes in “Z” channel frame.
(Make sure levelling feet for MetroMax &
MetroMax Q are screwed all the way in before
assembling).
4. Place a flat washer and lockwasher onto the
3
/
8
-16 hex head bolt (all provided in the dolly
hardware bag) and insert thru the underside of
the dolly thru caster and “Z” channel frame,
and into the post as shown. Make sure that the
washers are positioned as shown.
5. Tighten all bolts securely as required.
ASSEMBLY INSTRUCTION FOR
MOUNTING POST TO DOLLY -
“C” PLATE CASTER
This assembly instruction
applies to “C” plate casters only —
please see reverse side for “B”
plate applications.
NOTE:
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-992-1776
Visit Our Web Site: www.metro.com
L01-236
REV. C 06/18
Information and specifications are subject to change
without notice. Please confirm at time of order.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Metro L01-400 Operating instructions
-
-
Metro DataVac L01-567 Operating instructions
-
-
-
-
-
-
-