TrafficMASTER Allure Ultra 11242 Installation guide

Tapping Block Instructions

For use with TrafﬁcMaster

Allure

Ultra

with SimpleFit

Locking Technology

Halstead New England Corp.

15 Oakwood Ave.

Norwalk, CT 06850

Customer Service

1-866-843-8453

STEP 1

Insert the lengthwise tongue into

the lengthwise groove of the

previously installed row.

STEP 2

Press the short-side end joint with

the SimpleFit

white locking strip

into the short-side groove of the

previously installed plank. Using a

rubber mallet, gently tap until the

short-side end joint is fully engaged.

STEP 3

Use a hammer or mallet to gently tap

along the lengthwise groove with the

TrafﬁcMaster

Allure

Tapping Block.

Ensure the plank is completely tight

before moving onto the next plank

installation.

Download PDF