Atlas Metal Industries BIT-1014 Datasheet

Type
Datasheet
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475
BIT
BUILT-IN TRAY DISPENSER
BIT-1014
BIT2-1014
BIT-1216
BIT-1418
BIT-1520
BIT-1622
BIT-1821
Project Name
N
O
# Item N
O
# Quantity
CONSTRUCTION:
Cabinet sides and bottom shall be constructed of
heavy gauge galvanized steel with a non-conduc-
tive perimeter top strip. Interior top of cabinet shall
be reinforced with galvanized channel supports.
TRAY CARRIER: The tray carrier shall be grade 18-
8 stainless steel removable for cleaning.
SELF LEVELING: Elevators shall be stainless steel
die stamped telescoping tubing non-fatiguing
compression type springs stainless steel totally
enclosed.
OPTIONAL TOP SUPPORT FLANGE: Flange shall
be constructed of heavy gauge grade 18-8 stain-
less steel. The flange edge is beveled for snug fit
when installed in the countertop.
CORNER BUMPERS: Not included on this model.
CASTERS: Not included on this model.
SPECIFICATIONS
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
FOR HIGH VOLUME TRAY DISPENSING
FOR CAFETERIA AND TRAY MAKE-UP AREA
OPTIONS AND ACCESORIES
Silverware dispenser stainless steel
6, 8 & 10 holes
Napkin dispenser
Top support flange (optional)
“converts unit to drop-in”
Dispensers available to fit other size trays,
including trapezoid, available upon request
35
MODEL BIT
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475
36
BIT
BUILT-IN TRAY DISPENSER
SPECIFICATIONS:
TRAY CAPACITY AP PROX 100 TO 150
TRAYS PER STACK
TRAY CAPACITIES VARY WITH THE
TYPE OF TRAYS USED
*MODEL BIT2-1014 DISPENSES TWO
SEPARATE STACKS OF TRAYS
INSTALLATION:
THE STANDARD MODELS BIT REQUIRE
A 11/16” I.D. 90° COUNTER BRAKE DOWN
INTO THE CABINET TO OPENING.
BOTTOM OF CABINET MUST BE SUPPORTED.
SELF-LEVELING
TRAY DISPENSER
MODEL MAXIMUM TRAY SIZE LENGTH WIDTH CABINET OPENING
SHIP.
WT.
BIT-1014 10-7/8” x 15” 15-11/16” x 19-11/16” 11-11/16” x 15-11/16” 70 LBS.
*BIT2-1014 10-7/8” x 15” 27-11/16” x 19-11/16” 23-11/16” x 15-11/16” 102 LBS.
BIT-1216 12-5/8” x 16-3/8” 21-3/16” x 17-3/16” 17-3/16” x 13-3/16” 78 LBS.
BIT-1418 14-5/8” x 18-3/8” 23-3/16” x 19-3/16” 19-3/16” x 15-3/16” 78 LBS.
BIT-1520 15-5/8” x 20-3/8” 25-3/16” x 20-3/16” 21-3/16” x 16-3/16” 102 LBS.
BIT-1622 16-5/8” x 22-3/8” 27-3/16” x 21-3/16” 23-3/16” x 17-3/16” 102 LBS.
BIT-1821 18-1/8” x 22-3/8” 26-3/16” x 22-11/16” 22-3/16” x 18-11/16” 85 LBS.
BIT: WALL BUILT-IN TRAY/DISPENSER
10/07-SC
  • Page 1 1
  • Page 2 2

Atlas Metal Industries BIT-1014 Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI