2. Atlas Metal Industries
  3. N-1

Atlas Metal Industries N-1, N-2, N-3, N-4, N-5, N-6 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Atlas Metal Industries N-1 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
NAPKIN DISPENSER DROP-IN
MODEL - N
Project Name
N# Item N# Quantity
CONSTRUCTION:
Dispenser shall have four corner angles of grade
18-8 stainless steel, 20 gauge, welded to the top
flange and the bottom to form the dispenser
body.
TOP FLANGE:
Shall be stainless steel grade 18-8, 18 gauge,
with beveled outer edge for strength and snug
counter fit. Plastic roller, spring loaded, mounted
horizontally to maintain pressure on napkins to
be dispensed.
SELF-LEVELING:
Two properly calibrated extension springs shall
be attached to the underside of the top flange
and the dispenser head, to support the load to be
dispensed.
SPECIFICATIONS
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
FOR HIGH VOLUME DISPENSING
OF NAPKINS IN CAFETERIA
OR TRAY MAKE-UP AREA
OPTIONS AND ACCESORIES
Dispensers available to fit other size napkins
upon request
Special height
Additional roller for center folded napkins
49
N-1
N-2
N-3
N-4
N-5
N-6
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
50
NAPKIN DISPENSER DROP-IN
MODEL - N
STANDARD FEATURES:
•
ALL STAINLESS STEEL CONSTRUCTION
•
PROPERLY CALIBRATED STEEL EXTENSION
SPRINGS
•
ADJUSTABLE TO DIFFERENT WEIGHT LOADS
•
SPRING LOADED PLASTIC ROLLER
MODEL
MAXIMUM
NAPKIN SIZE
“L” “W” “L” “W” “L” “W”
N-1 7” x 5-1/8” 9-1/4” 7-1/8” 7-1/8” 5-1/4” 8-9/16” 5-1/2”
N-2 5-3/8” x 4” 7-5/8” 6” 5-1/2” 4-1/8” 6-15/16” 4-3/8”
N-3 7-1/8” x 4-1/4” 9-3/8” 6-1/4” 7-1/4” 4-3/8” 8-11/16” 4-5/8”
N-4 8” x 4-1/2” 10-1/4” 6-1/2” 8-1/8” 4-5/8” 9-9/16” 4-7/8”
N-5 8-3/4” x 4-3/4” 11” 6-3/4” 8-7/8” 4-7/8” 10-5/16” 5-1/8”
N-6 7-1/8” x 6-7/8” 9-3/8” 8-7/8” 7-1/4” 7” 8-11/16” 7-1/4”
SELF-LEVELING
NAPKIN
DISPENSER
N: DROP-IN NAPKIN DISPENSER
FLANGE OVERALL
INSIDE OPENING COUNTER CUT-OUT
24”
24”
24”
24”
24”
24”
“H”
10/07-SC
/