Atlas Metal Industries DIT-1821 Datasheet

DIT-1821
Brand
Atlas Metal Industries
Model
DIT-1821
Type
Datasheet
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DIT
DROP-IN TRAY DISPENSER
DIT-1014
DIT2-1014
DIT-1216
DIT-1418
DIT-1520
DIT-1622
DIT-1821
Project Name
N
O
# Item N
O
# Quantity
CONSTRUCTION:
The construction of the model DIT shall be a top
flange with self levelers bolted to the underside
of the flange. Shall be gauge grade 18-8 stainless
steel angle, welded ground and polished. The
outer edge of the flange shall be beveled for
additional strength, and to provide a snug fit with
the counter top.
SELF LEVELING: Elevators shall be stainless steel
die stamped telescoping tubing non-fatiguing
compression type springs stainless steel totally
enclosed.
SPECIFICATIONS
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
FOR HIGH VOLUME TRAY DISPENSING
FOR CAFETERIA AND TRAY MAKE-UP AREA
OPTIONS AND ACCESORIES
Silverware dispenser stainless steel
6, 8 & 10 holes
Napkin dispenser
Dispensers available to fit other size trays,
including trapezoid, available upon request
39
MODEL DIT-1216
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
40
DIT
DROP-IN TRAY DISPENSER
SPECIFICATIONS:
TRAY CAPACITY APPROX 100
TRAYS PER STACK
TRAY CAPACITIES VARY WITH THE
TYPE OF TRAYS USED
*MODEL DIT2-1014 DISPENSES TWO
SEPARATE STACKS OF TRAYS
INSTALLATION:
*STANDARD HEIGHT IS 27-1/2”
OPTIONAL 23-1/2” OR 31-1/2” HEIGHTS
AVAILABLE AT ADDITIONAL COST
SELF-LEVELING
TRAY DISPENSER
MODEL MAXIMUM TRAY SIZE
FLANGE O.A.
LENGTH • WIDTH
COUNTER CUT-OUT
SHIP.
WT.
DIT-1014 10-7/8” x 15” 15-3/4” x 20-1/4” 11-7/8” x 19-1/4” 40 LBS.
*DIT2-1014 10-7/8” x 15” 27-3/4” x 20-1/4” 23-7/8” x 19-1/4” 65 LBS.
DIT-1216 12-5/8” x 16-3/8” 22-1/8” x 17-5/8” 18-1/4” x 16-5/8” 65 LBS.
DIT-1418 14-5/8” x 18-3/8” 23-5/8” x 19-5/8” 19-3/4” x 18-5/8” 65 LBS.
DIT-1520 15-5/8” x 20-3/8” 25-5/8” x 20-5/8” 21-3/4” x 19-5/8” 65 LBS.
DIT-1622 16-5/8” x 22-3/8” 27-5/8” x 21-5/8” 23-3/4” x 20-5/8” 65 LBS.
DIT-1821 18-1/8” x 21-1/8” 26-5/8” x 23-1/8” 22-3/4” x 22-1/8” 78 LBS.
DIT: DROP-IN TRAY/DISPENSER
10/07-SC
  • Page 1 1
  • Page 2 2

Atlas Metal Industries DIT-1821 Datasheet

DIT-1821
Brand
Atlas Metal Industries
Model
DIT-1821
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers