Atlas Metal Industries MET2-1014 Datasheet

MET2-1014
Brand
Atlas Metal Industries
Model
MET2-1014
Type
Datasheet

This manual is also suitable for

a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
MET
MOBILE ENCLOSED TRAY DISPENSER
MET-1622
MET2-1014
MET-1216
MET-1418
MET-1520
Project Name
N
O
# Item N
O
# Quantity
CONSTRUCTION:
Integrally welded extruded aluminum frame with
stainless steel top and side panels.
TOP: Shall be 16 gauge stainless steel grade 18-8
welded and polished to a #3 finish.
SIDE PANELS: Shall be 18 gauge stainless steel
grade 18-8, #3 standard. And .050 aluminum with
optional laminate.
FRAME: Extruded aluminum 1-1/4” x 1-1/4” verti-
cal corner supports. No less than 1/8” thick.
TRAY CARRIER: Shall be gauge grade 18-8 stain-
less steel #3 finish.
SELF LEVELING: Elevators shall be stainless steel
die stamped telescoping tubing non fatiguing
compression type springs stainless steel, totally
enclosed.
CORNER BUMPERS: Shall be gray nonmarking
vinyl attached securely to frame.
CASTERS: Shall be 4” swivel heavy duty with
optional brake.
SPECIFICATIONS
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
FOR HIGH VOLUME TRAY DISPENSING
FOR CAFETERIA AND TRAY MAKE-UP AREA
OPTIONS AND ACCESORIES
Silverware dispenser stainless steel
6, 8 & 10 holes
Wrap around bumper
Plastic laminate panels
Locking casters
Napkin dispensers
Dispensers available to fit other size trays,
including trapezoid, available upon request
7
MODEL MET-1418
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
8
MET
MOBILE ENCLOSED TRAY DISPENSER
SPECIFICATIONS:
STANDARD MOUNTING OF SILVERWARE
DISPENSER IS ABOVE THE TOP AND ACROSS
THE WIDTH OF THE UNIT.
PLEASE ADVISE IF YOUR REQUIREMENTS
ARE DIFFERENT.
BUMPERS ADD 1-3/4” TO L & W
*MODEL MET2-1014 DISPENSES TWO
SEPARATE STACKS OF TRAYS
SELF-LEVELING
TRAY DISPENSER
MET: MOBILE ENCLOSED TRAY/DISPENSER
MODEL MAXIMUM TRAY SIZE LENGTH • WIDTH SHIPPING WEIGHT
MET-1216 12-5/8” x 16-3/8” 22-1/4” x 18-1/4” 78 LBS.
MET-1418 14-5/8” x 18-3/8” 24-1/4” x 20-1/4” 78 LBS.
MET-1520 15-5/8” x 20-3/8” 26-1/4” x 21-1/4” 96 LBS.
MET-1622 16-5/8” x 22-3/8” 28-1/4” x 22-1/4” 102 LBS.
*MET2-1014 10-7/8” x 15” 29” x 21” 102 LBS.
10/07-SC
  • Page 1 1
  • Page 2 2

Atlas Metal Industries MET2-1014 Datasheet

MET2-1014
Brand
Atlas Metal Industries
Model
MET2-1014
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers