2. Munters
  3. RWM 0.75

Munters RWM 0.75 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Munters RWM 0.75 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
P/N: 116407
Ag/MIS/IGB-2289-10/15 Rev. 1.0
RWM 0.75”
Multi-jet Magnetic Water Meter
Water meters using the multi-jet principle are the best
cost/performance, long life, flow measurement
instruments. Wide clearances in the measuring chamber
and negligible area of contact between static and
moving parts are the key reasons for the high reliability of
this design, even in hard water.
Features
•
The only moving part, the impeller, is in contact with
the water for minimum wear and highest reliability.
•
Magnetically driven sealed registers. Stainless
steel/glass encapsulated option is unconditionally
guaranteed against fogging.
General Specifications
Nominal
Size
(inch)
Qmax
Max
flowrate
(

/h)
Qn
Nominal
flowrate
(gal/h)
Qt
Transitional
flowrate
(gal/h)
Qmin
Minimum
flowrate
(gal/h)
Maximum
register
capacity
(gal)
Minimum
register
capacity
(quart)
Accuracy
between
Qmax &
Qt
Accuracy
between
Qmax &
Qt
3/4” 1321 660 53 13.2 26417205 0.1 ±2% ±5%
Technical Specifications
Maximum Working
Pressure
145 PSI (232 PSI optional)
Maximum Working
Temperature
122° F
Body Corrosion proof copper alloy
Reinforced polyethylene cap
Pulse/Gallon 1.0
Installation Requirements
•
Install the Meter in a horizontal position, dial face up.
•
Flush the pipeline before installation.
•
The meter should be constantly full of water.
P/N: 116407
Ag/MIS/IGB-2289-10/15 Rev. 1.0
RWM 0.75”
Multi-jet Magnetic Water Meter
Water meters using the multi-jet principle are the best
cost/performance, long life, flow measurement
instruments. Wide clearances in the measuring chamber
and negligible area of contact between static and
moving parts are the key reasons for the high reliability of
this design, even in hard water.
Features
•
The only moving part, the impeller, is in contact with
the water for minimum wear and highest reliability.
•
Magnetically driven sealed registers. Stainless
steel/glass encapsulated option is unconditionally
guaranteed against fogging.
General Specifications
Nominal
Size
(inch)
Qmax
Max
flowrate
(

/h)
Qn
Nominal
flowrate
(gal/h)
Qmin
Minimum
flowrate
(gal/h)
Maximum
register
capacity
(gal)
Minimum
register
capacity
(quart)
Accuracy
between
Qmax &
Qt
Accuracy
between
Qmax &
Qt
3/4” 1321 660 53 13.2 26417205 0.1 ±2% ±5%
Technical Specifications
Maximum Working
Pressure
10 bar (16 bar optional)
Maximum Working
Temperature
122° F
Body Corrosion proof copper alloy
Reinforced polyethylene cap
Pulse/Gallon 1.0
Installation Requirements
•
Install the Meter in a horizontal position, dial face up.
•
Pipeline must be flushed before installation.
•
The meter should be constantly full of water.
/