Satco S11288 offers a smart and versatile lighting solution for both indoor and outdoor spaces. With its ability to connect up to 3 sets, you can extend the string lights up to 72 feet, creating a continuous luminous display. The string lights feature a variety of functions accessible through a control button, including Meteor Jump, 7 Colors Flash, Breath, Change, Circle Change, and DIY modes. The DIY mode allows for customization of the light sequence to suit your preferences. Installation is simple and requires no tools, with universal keyholes for hanging the lights downwards.
Satco S11288 offers a smart and versatile lighting solution for both indoor and outdoor spaces. With its ability to connect up to 3 sets, you can extend the string lights up to 72 feet, creating a continuous luminous display. The string lights feature a variety of functions accessible through a control button, including Meteor Jump, 7 Colors Flash, Breath, Change, Circle Change, and DIY modes. The DIY mode allows for customization of the light sequence to suit your preferences. Installation is simple and requires no tools, with universal keyholes for hanging the lights downwards.
STARFISH WIFI SMART INDOOR/
OUTDOOR STRING LIGHTS
Model: S1128 8
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
• Installation requires knowledge of luminaries electrical
systems. If not qualied, do not attempt installation.
Contact a qualied electrician.
• To reduce risk of re and over-heating, secure all
connections.
• TURN OFF the electrical power before proceeding.
• The electrical rating of this product is 100-120V/50-60Hz.
• The grounding and banding of the overall system shall be
done in accordance with National Electric Code (NEC)
Article 600 and local codes.
• These string lights can be connected end-to-end, 3 x 24' sets maximum*.
• Never use with an extension cord unless the plug can be fully inserted. DO NOT alter the plug.
• To reduce the risk of electric shock, DO NOT use the product if power cord is frayed or broken.
• Always unplug this product before installing or replacing bulbs.
• To avoid risk of re, burns, personal injury and electric shock, it should not be played with or
placed where small children can reach it.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference; (2) This device must accept any
interference received, including interference that may cause undesired operation. Visit www.Satco.com
for full warranty details and dimmer compatibility information.
CONTENTS:
• 1 String Light
with LED Bulbs
• 1 Adapter
• 1 Controller
Satco Products, Inc.
Brentwood, N Y 11717© Copyright 2020 Satco Products, Inc. 10/20
*NOTE: Cannot be used in conjunction with S11272
INSTALLATION
NOTE: DO NOT DRAPE CORD. KEEP AWAY FROM CHILDREN.
Before beginning installation of product, make sure all parts
are present. If any part is missing or damaged, do not attempt
to install the product. No tools are required for installation.
STEP 1: Carefully unpack string lights from box. Straighten string
lights, eliminating any kinks before using.
STEP 2: Each string light is designed with
a universal keyhole for mounting with lights
hanging downward. Hardware options
(not included) screws, nails, zip ties, hooks
and more.
STEP 3: Before plugging power
cord of lights into a wall outlet,
make sure each light bulb is
securely fastened. Install the
bulbs into the sockets.
STEP 4: Connect the string light
with the controller and adapter.
STEP 6: Via the control button on the
driver, toggle through the functions:
• Scene 1 - Meteor Jump
• Scene 2 - 7 Colors Flash
• Scene 3 - 7 Colors Jump
• Scene 4 - Breath Change
• Scene 5 - Breath Meteor
• Scene 6 - Circle Change
• Scene 7 - DIY
• OFF
• Press and hold on for 5 seconds to connect APP
STEP 5: Plug string light into the nearest outlet. Installation is
complete. Turn power ON.
CAUTION: RISK OF ELECTRIC SHOCK
Do not lay the adapter directly on the ground or where
standing water may accumulate. Keep plugs and
receptacles dry. Do not submerse.
Download the
STARFISH App
INSTALLATION
NOTE: DO NOT DRAPE CORD. KEEP AWAY FROM CHILDREN.
Before beginning installation of product, make sure all parts
are present. If any part is missing or damaged, do not attempt
to install the product. No tools are required for installation.
STEP 1: Carefully unpack string lights from box. Straighten string
lights, eliminating any kinks before using.
STEP 2: Each string light is designed with
a universal keyhole for mounting with lights
hanging downward. Hardware options
(not included) screws, nails, zip ties, hooks
and more.
STEP 3: Before plugging power
cord of lights into a wall outlet,
make sure each light bulb is
securely fastened. Install the
bulbs into the sockets.
STEP 4: Connect the string light
with the controller and adapter.
STEP 6: Via the control button on the
driver, toggle through the functions:
• Scene 1 - Meteor Jump
• Scene 2 - 7 Colors Flash
• Scene 3 - 7 Colors Jump
• Scene 4 - Breath Change
•
Scene 5 - Breath Meteor
•
Scene 6 - Circle Change
•
Scene 7 - DIY
• Press and hold on for 5 seconds to connect APP
•
OFF
STEP 5: Plug string light into the nearest outlet. Installation is
Turn power ON. Download the
STARFISH App
S
STEP 8:
TEP 9: App Connection: T
Replacing bulbs.
NOTE:Always unplug the string
light before replacing bulbs.
o connect your device, download
on how to pair your device.
CAUTION: RISK OF ELECTRIC SHOCK
Do not lay the adapter directly on the
ground or where standing water may accumulate.
Keep plugs and receptacles dry.
Do not submerse.
complete.
4
2
3
1 5
Unscrew bulb
plastic cover
Pull LED light
out of its base
Align the 4pins of
the new light and
push in
Tighten plastic
cover back into
the socket
Remove cover
from the socket
STEP 7: INSTALLING MULTIPLE STRING LIGHT SETS:
NOTE: Always unplug string light from outlet before connecting additional string lights.
Extend the length of your lights by connecting more than one strand together to form
one continuous string up to 72 feet (3 sets) for S11272.
Simply follow the above installation steps making sure each
connection between strands is secured, plug the male end
into the female and slide the plastic ring over threads,
securely tighten plastic ring when done.
INSTALLATION
NOTE: DO NOT DRAPE CORD. KEEP AWAY FROM CHILDREN.
Before beginning installation of product, make sure all parts
are present. If any part is missing or damaged, do not attempt
to install the product. No tools are required for installation.
STEP 1: Carefully unpack string lights from box. Straighten string
lights, eliminating any kinks before using.
STEP 2: Each string light is designed with
a universal keyhole for mounting with lights
hanging downward. Hardware options
(not included) screws, nails, zip ties, hooks
and more.
STEP 3: Before plugging power
cord of lights into a wall outlet,
make sure each light bulb is
securely fastened. Install the
bulbs into the sockets.
STEP 4: Connect the string light
with the controller and adapter.
STEP 6: Via the control button on the
driver, toggle through the functions:
• Scene 1 - Meteor Jump
• Scene 2 - 7 Colors Flash
• Scene 3 - 7 Colors Jump
• Scene 4 - Breath Change
•
Scene 5 - Breath Meteor
•
Scene 6 - Circle Change
•
Scene 7 - DIY
• Press and hold on for 5 seconds to connect APP
•
OFF
STEP 5: Plug string light into the nearest outlet. Installation is
Turn power ON. Download the
STARFISH App
S
STEP 8:
TEP 9: App Connection: T
Replacing bulbs.
NOTE:Always unplug the string
light before replacing bulbs.
o connect your device, download
on how to pair your device.
CAUTION: RISK OF ELECTRIC SHOCK
Do not lay the adapter directly on the
ground or where standing water may accumulate.
Keep plugs and receptacles dry.
Do not submerse.
complete.
4
2
3
1 5
Unscrew bulb
plastic cover
Pull LED light
out of its base
Align the 4pins of
the new light and
push in
Tighten plastic
cover back into
the socket
Remove cover
from the socket
STEP 7: INSTALLING MULTIPLE STRING LIGHT SETS:
NOTE: Always unplug string light from outlet before connecting additional string lights.
Extend the length of your lights by connecting more than one strand together to form
one continuous string up to 72 feet (3 sets) for S11272.
Simply follow the above installation steps making sure each
connection between strands is secured, plug the male end
into the female and slide the plastic ring over threads,
securely tighten plastic ring when done.
INSTALLATION
NOTE: DO NOT DRAPE CORD. KEEP AWAY FROM CHILDREN.
Before beginning installation of product, make sure all parts
are present. If any part is missing or damaged, do not attempt
to install the product. No tools are required for installation.
STEP 1: Carefully unpack string lights from box. Straighten string
lights, eliminating any kinks before using.
STEP 2: Each string light is designed with
a universal keyhole for mounting with lights
hanging downward. Hardware options
(not included) screws, nails, zip ties, hooks
and more.
STEP 3: Before plugging power
cord of lights into a wall outlet,
make sure each light bulb is
securely fastened. Install the
bulbs into the sockets.
STEP 4: Connect the string light
with the controller and adapter.
STEP 6: Via the control button on the
driver, toggle through the functions:
• Scene 1 - Meteor Jump
• Scene 2 - 7 Colors Flash
• Scene 3 - 7 Colors Jump
• Scene 4 - Breath Change
•
Scene 5 - Breath Meteor
•
Scene 6 - Circle Change
•
Scene 7 - DIY
• Press and hold on for 5 seconds to connect APP
•
OFF
STEP 5: Plug string light into the nearest outlet. Installation is
Turn power ON. Download the
STARFISH App
S
STEP 8:
TEP 9: App Connection: T
Replacing bulbs.
NOTE:Always unplug the string
light before replacing bulbs.
o connect your device, download
on how to pair your device.
CAUTION: RISK OF ELECTRIC SHOCK
Do not lay the adapter directly on the
ground or where standing water may accumulate.
Keep plugs and receptacles dry.
Do not submerse.
complete.
4
2
3
1 5
Unscrew bulb
plastic cover
Pull LED light
out of its base
Align the 4pins of
the new light and
push in
Tighten plastic
cover back into
the socket
Remove cover
from the socket
STEP 7: INSTALLING MULTIPLE STRING LIGHT SETS:
NOTE: Always unplug string light from outlet before connecting additional string lights.
Extend the length of your lights by connecting more than one strand together to form
one continuous string up to 72 feet (3 sets) for S11272.
Simply follow the above installation steps making sure each
connection between strands is secured, plug the male end
into the female and slide the plastic ring over threads,
securely tighten plastic ring when done.
INSTALLATION
NOTE: DO NOT DRAPE CORD. KEEP AWAY FROM CHILDREN.
Before beginning installation of product, make sure all parts
are present. If any part is missing or damaged, do not attempt
to install the product. No tools are required for installation.
STEP 1: Carefully unpack string lights from box. Straighten string
lights, eliminating any kinks before using.
STEP 2: Each string light is designed with
a universal keyhole for mounting with lights
hanging downward. Hardware options
(not included) screws, nails, zip ties, hooks
and more.
STEP 3: Before plugging power
cord of lights into a wall outlet,
make sure each light bulb is
securely fastened. Install the
bulbs into the sockets.
STEP 4: Connect the string light
with the controller and adapter.
STEP 6: Via the control button on the
driver, toggle through the functions:
• Scene 1 - Meteor Jump
• Scene 2 - 7 Colors Flash
• Scene 3 - 7 Colors Jump
• Scene 4 - Breath Change
•
Scene 5 - Breath Meteor
•
Scene 6 - Circle Change
•
Scene 7 - DIY
• Press and hold on for 5 seconds to connect APP
•
OFF
STEP 5: Plug string light into the nearest outlet. Installation is
Turn power ON. Download the
STARFISH App
S
STEP 8:
TEP 9: App Connection: T
Replacing bulbs.
NOTE:Always unplug the string
light before replacing bulbs.
o connect your device, download
on how to pair your device.
CAUTION: RISK OF ELECTRIC SHOCK
Do not lay the adapter directly on the
ground or where standing water may accumulate.
Keep plugs and receptacles dry.
Do not submerse.
complete.
4
2
3
1 5
Unscrew bulb
plastic cover
Pull LED light
out of its base
Align the 4pins of
the new light and
push in
Tighten plastic
cover back into
the socket
Remove cover
from the socket
STEP 7: INSTALLING MULTIPLE STRING LIGHT SETS:
NOTE: Always unplug string light from outlet before connecting additional string lights.
Extend the length of your lights by connecting more than one strand together to form
one continuous string up to 72 feet (3 sets) for S11272.
Simply follow the above installation steps making sure each
connection between strands is secured, plug the male end
into the female and slide the plastic ring over threads,
securely tighten plastic ring when done.
STEP 7: INSTALLING MULTIPLE STRING LIGHT SETS:
NOTE: Always unplug string light from outlet before connecting additional string lights.
Extend the length of your lights by connecting more than one strand together to form
one continuous string up to 72 feet (3 sets) for S11288.
Simply follow the above installation steps making sure each
connection between strands is secured, plug the male end
into the female and slide the plastic ring over threads,
securely tighten plastic ring when done.
STEP 8: Replacing bulbs.
NOTE:Always unplug the string
light before replacing bulbs.
STEP 9: App Connection: To connect your device, download the
free ”Starsh Smart Lighting” App from the app store.
Please refer to our Starsh User Guide for detailed instuctions on
how to pair your device.
-
1
-
2
Satco S11288 offers a smart and versatile lighting solution for both indoor and outdoor spaces. With its ability to connect up to 3 sets, you can extend the string lights up to 72 feet, creating a continuous luminous display. The string lights feature a variety of functions accessible through a control button, including Meteor Jump, 7 Colors Flash, Breath, Change, Circle Change, and DIY modes. The DIY mode allows for customization of the light sequence to suit your preferences. Installation is simple and requires no tools, with universal keyholes for hanging the lights downwards.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Satco S11259 User manual
-
Satco S11260 Operating instructions
-
Satco NUVO 0-10V User manual
-
Satco Starfish T20 User guide
-
Satco 64-100 User guide
-
-
-
-
-
Satco StarFish User guide