Satco S11259 User manual

Brand: Satco

Model: S11259

Type: User manual

Satco S11259 is a 4-inch LED downlight that offers smart lighting capabilities. With its built-in Wi-Fi connectivity, you can control the light using the Starfish Smart Lighting app, allowing for dimming, scheduling, and color temperature adjustment. The light is suitable for wet locations and covered ceiling-mounted luminaires. Installation requires some electrical knowledge and should be done by a qualified electrician. Enjoy the convenience of smart lighting and energy efficiency with the Satco S11259.

STARFISH WIFI SMART

4" LED DOWNLIGHT

Model: S11259

Satco Products, Inc.

Bre ntwood, N Y 11717

INSTALLATION

INSTALLATION AND SAFETY INSTRUCTIONS

IMPORTANT: Read before installing xture. Retain for future reference.

Dimensions

5" (130mm)

STEP 1: Turn OFF power prior to installation.

STEP 2: Remove existing trim installed in recessed housing (if necessary).

STEP 3: If applicable, slide lamp holder bracket to its upward maximum

position. If the lamp holder bracket is less than 4 1/2" from the bottom

edge of the xture enclosure, the lamp holder bracket must be removed.

STEP 4: If necessary, remove the lamp holder mounting bracket and the

lamp holder from the bracket, then attach the provided label to the existing

luminaire. See Figure A.

STEP 5: Install adapter into socket. See Figure B.

STEP 6: Connect the orange terminals together. See Figure C.

STEP 7: Insert torsion springs into luminaire housing brackets. See

Figure D.

STEP 8: Gently push up trim and torsion springs so they begin to expand

and lift trim in place. See Figure E. Installation is complete. Turn power ON.

STEP 9: App Connection: To connect your device, download the free

“Starsh Smart Lighting” App from the app store. Please refer to our

Starsh User Guide for detailed instructions on how to pair your device.

For Installation into existing recessed LED luminaire with

compatible connectors:

• Follow STEPS 1 and 2 above.

STEP 3: Discard medium base adapter.

• Skip STEPS 4 and 5 above. Continue with STEPS 6, 7 and 8 above.

WARNING: Risk of Fire or Electric Shock

• LED Retrot Kit installation requires knowledge of luminaries electrical systems.

If not qualied, do not attempt installation. Contact a qualied electrician.

• To reduce risk of re and over-heating, secure all connections.

• TURN OFF the electrical power before proceeding.

• Install this kit only in luminaires that have the construction features and dimensions

shown in the photographs and/or drawings and where the input rating of the retrot

kit does not exceed the input rating of the luminaire.

• The electrical rating of this product is 120V/60Hz.

• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal

or other sharp objects.

• Do not make or alter any open holes in an enclosure of wiring or electrical

components during kit installation.

• This retrot kit is accepted as a component of a luminaire where the suitability of

the combination shall be determined by authorities having jurisdiction.

• This device is not intended for use with emergency exits.

• Suitable for wet locations, covered ceiling-mounted luminaire.

WARRANTY: This product is guaranteed for a 5-year warranty. Any quality issue in

normal use within the warranty period, will be repaired or replaced according to the

situation and under the condition specications can be provided. Visit www.Satco.com

for full warranty details and dimmer compatibility information.

2 3/4"

(71mm)

Min: 5 1/2"

(140mm)

Min: 4 1/4" (102mm)

Orange

terminals

Adaptor

Lamp holder

bracket

A D

Download the

STARFISH App

SALE on SATCO @ www.BulbAmerica.com

take additional 5% Off with coupon code 5PDF

Satco S11259 User manual

Satco S11259 User manual

Related papers

Other documents