Satco S11260 Operating instructions

  • Hello! I'm your chat assistant. I've reviewed the installation and safety instructions for the SATCO LED Downlight models S11260 and S11286. This document covers crucial safety measures and step-by-step instructions for installing the device. It also outlines the app connection process. Feel free to ask me any questions you have about the installation or features of this product.
  • What is the electrical rating of this product?
    Is this device suitable for wet locations?
    What is the warranty period for this product?
STARFISH WIFI SMART
5"/6" LED DOWNLIGHT
Model: S11260, S112 86
Satco Products, Inc.
Br e ntwoo d, NY 11717
INSTALLATION
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
Dimensions
© Copyright 2021 Satco Products, Inc. 12/21
STEP 1: Turn OFF power prior to installation.
STEP 2: Remove existing trim installed in recessed housing (if necessary).
STEP 3: If applicable, slide lamp holder bracket to its upward maximum
position. If the lamp holder bracket is less than 4 1/2" from the bottom
edge of the xture enclosure, the lamp holder bracket must be removed.
STEP 4: If necessary, remove the lamp holder mounting bracket and the
lamp holder from the bracket, then attach the provided label to the existing
luminaire. See Figure A.
STEP 5: Install adapter into socket. See Figure B.
STEP 6: Connect the orange terminals together. See Figure C.
STEP 7: Insert torsion springs into luminaire housing brackets. See
Figure D.
STEP 8: Gently push up trim and torsion springs so they begin to expand
and lift trim in place. See Figure E. Installation is complete. Turn power ON.
STEP 9: App Connection: To connect your device, download the free
“Starsh Smart Lighting” App from the app store. Please refer to our
Starsh User Guide for detailed instructions on how to pair your device.
For Installation into existing recessed LED luminaire with
compatible connectors:
• Follow STEPS 1 and 2 above.
STEP 3: Discard medium base adapter.
Skip STEPS 4 and 5 above. Continue with STEPS 6, 7 and 8 above.
WARNING: Risk of Fire or Electric Shock
LED Retrot Kit installation requires knowledge of luminaries electrical systems.
If not qualied, do not attempt installation. Contact a qualied electrician.
To reduce risk of re and over-heating, secure all connections.
• TURN OFF the electrical power before proceeding.
Install this kit only in luminaires that have the construction features and dimensions
shown in the photographs and/or drawings and where the input rating of the retrot
kit does not exceed the input rating of the luminaire.
• The electrical rating of this product is 120V/60Hz.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal
or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
This retrot kit is accepted as a component of a luminaire where the suitability of
the combination shall be determined by authorities having jurisdiction.
This device is not intended for use with emergency exits.
Suitable for wet locations, covered ceiling-mounted luminaire.
WARRANTY: This product is guaranteed for a 5-year warranty. Any quality issue in
normal use within the warranty period, will be repaired or replaced according to the
situation and under the condition specications can be provided. Visit www.Satco.com
for full warranty details and dimmer compatibility information.
2 7/8"
(73.5mm)
Min: 7 1/2"
(190mm)
Min: 5 3/8" (135mm)
Orange
terminals
C
Adaptor
B
Lamp holder
bracket
A D
E
7 3/8" (187mm)
Download the
STARFISH App
1/1