dji Phantom 4 Prop Guards Owner's manual

Type
Owner's manual

This manual is also suitable for

PHANTOM 4
Prop Guards Installation Guide
In the Box
Installation
Follow the instructions below to install the Phantom 4 Prop
Guard.
The Obstacle Sensing System is automatically turned
off when the Prop Guards are attached. The aircraft
will not be able to avoid obstacles during ight.
©
2016 DJI. All Rights Reserved.
Specications
Weight (1pc) 18 g
Angle 163.0°
Radius 136.5 mm
Installed Circumference 624.5 mm
Prop Guards × 4
Remove all four plastic stoppers from the Prop Guard
mounting holes.
Retain the original plastic stoppers and store them
someplace safe for future use.
©
2016 DJI. All Rights Reserved.
1
Release the lock arm from its original locked position
and insert the arm into the Prop Guard mounting hole.
©
2016 DJI. All Rights Reserved.
2
A
B
Snap the lock arm back to its original position, making
sure it is tightly secured. Repeat step 1 to step 3 to
install the remaining Prop Guards.
If you have any questions about this document, please contact DJI by
sending a message to
.
Download the latest version from
http://www.dji.com/product/phantom-4/info#downloads
The content is subject to change.
©
2016 DJI. All Rights Reserved.
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

dji Phantom 4 Prop Guards Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI