2. dji
  3. Phantom 4
Phantom 4

dji Phantom 4, GO 4, Phantom 4 Prop Guards Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the dji Phantom 4 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PHANTOM 4
Prop Guards Installation Guide
In the Box
Installation
Follow the instructions below to install the Phantom 4 Prop
Guard.
The Obstacle Sensing System is automatically turned
off when the Prop Guards are attached. The aircraft
will not be able to avoid obstacles during ight.
©
2016 DJI. All Rights Reserved.
Specications
Weight (1pc) 18 g
Angle 163.0°
Radius 136.5 mm
Installed Circumference 624.5 mm
Prop Guards × 4
Remove all four plastic stoppers from the Prop Guard
mounting holes.
Retain the original plastic stoppers and store them
someplace safe for future use.
©
2016 DJI. All Rights Reserved.
1
Release the lock arm from its original locked position
and insert the arm into the Prop Guard mounting hole.
©
2016 DJI. All Rights Reserved.
2
A
B
Snap the lock arm back to its original position, making
sure it is tightly secured. Repeat step 1 to step 3 to
install the remaining Prop Guards.
If you have any questions about this document, please contact DJI by
sending a message to
[email protected]
.
Download the latest version from
http://www.dji.com/product/phantom-4/info#downloads
The content is subject to change.
©
2016 DJI. All Rights Reserved.
3
/