2. Rice Lake
  3. UJB3T6
UJB3T6

Rice Lake UJB3T6 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Rice Lake UJB3T6 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the different types of hook-ups available for the Rice Lake UJB3T6?
    Which terminal should be connected to the load cells?
    Which terminal should be connected to the indicator?
    Where should the shield be connected?
    Is grounding required for the Rice Lake UJB3T6?
    What is the purpose of the Rice Lake UJB3T6?
UJB3T6
DC Transient Protector Wiring
Installation Manual
PN 206560 Rev AApril 30, 2021
An ISO 9001 registered company
© Rice Lake Weighing Systems. All rights reserved.
Rice Lake Weighing Systems® is a registered trademark of
Rice Lake Weighing Systems.
All other brand or product names within this publication are trademarks or
registered trademarks of their respective companies.
All information contained within this publication is, to the best of our knowledge, complete and
accurate at the time of publication. Rice Lake Weighing Systems reserves the right to make
changes to the technology, features, specifications and design of the equipment without notice.
The most current version of this publication, software, firmware and all other product
updates can be found on our website:
www.ricelake.com
UJB3T6 DC Transient Protector Wiring
© Rice Lake Weighing Systems ● All Rights Reserved 1
+S LOADCELL
IMPORTANT:
GROUND TO LTP-1 CHASSIS OR
GROUND ROD PER SYSTEM
TYPE 1 HOOK-UP
CONVENTIONAL SCALE INDICATORS
+EXCITATION
+SENSE
-EXCITATION
-SENSE
+SIGNAL
-SIGNAL
SHIELD
EARTH GROUND
SERIAL NUMBERUJB3T6
+EXC
+SEN
-EXC
-SEN
+SIG
-SIG
SHLD
+EXC
TO INDICATOR
TO LOADCELLS
+SEN
-EXC
-SEN
+SIG
-SIG
SHLD
-S
+E
-E
UJB3T6 DC Transient Protector Wiring
2 Visit our website www.RiceLake.com
IMPORTANT:
GROUND TO LTP-1 CHASSIS OR
GROUND ROD PER SYSTEM
+S LOADCELL
TYPE 2 HOOK-UP
INDICATORS WITH CHOPPED POWER SUPPLIES
+EXCITATION
+SENSE
-EXCITATION
-SENSE
+SIGNAL
-SIGNAL
SHIELD
EARTH GROUND
SERIAL NUMBERUJB3T6
+EXC
+SEN
-EXC
-SEN
+SIG
-SIG
SHLD
+EXC
TO INDICATOR
TO LOADCELLS
+SEN
-EXC
-SEN
+SIG
-SIG
SHLD
-S
+E
-E
UJB3T6 DC Transient Protector Wiring
© Rice Lake Weighing Systems ● All Rights Reserved 3
IMPORTANT:
GROUND TO LTP-1 CHASSIS OR
GROUND ROD PER SYSTEM
+S LOADCELL
TYPE 3 HOOK-UP
INDICATORS WITH SINGLE-ENDED POWER SUPPLIES
+EXCITATION
+SENSE
-EXCITATION
-SENSE
+SIGNAL
-SIGNAL
SHIELD
EARTH GROUND
SERIAL NUMBERUJB3T6
+EXC
+SEN
-EXC
-SEN
+SIG
-SIG
SHLD
+EXC
TO INDICATOR
TO LOADCELLS
+SEN
-EXC
-SEN
+SIG
-SIG
SHLD
-S
+E
-E
230 W. Coleman St. • Rice Lake, WI 54868 • USA
U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319
Rice Lake Weighing Systems is an ISO 9001 registered company.
© Rice Lake Weighing Systems Specifications subject to change without notice.
www.ricelake.com
PN 206560 Rev AApril 30, 2021
/