BMW R53 Installation Instructions Manual

Type
Installation Instructions Manual

This manual is also suitable for

BMW R53: Enhance your driving experience with a seamless hands-free communication system. Stay connected while keeping your focus on the road. Enjoy crystal-clear calls and effortless control of your mobile phone's audio functions. The integrated loudspeaker ensures optimal sound quality, while the adjustable gooseneck positions the microphone perfectly for clear voice transmission. Installation is a breeze, and the kit is compatible with Siemens Mobile Phones Series 35 and 45. Embrace a safer and more convenient way to communicate behind the wheel with the BMW R53.

BMW R53: Enhance your driving experience with a seamless hands-free communication system. Stay connected while keeping your focus on the road. Enjoy crystal-clear calls and effortless control of your mobile phone's audio functions. The integrated loudspeaker ensures optimal sound quality, while the adjustable gooseneck positions the microphone perfectly for clear voice transmission. Installation is a breeze, and the kit is compatible with Siemens Mobile Phones Series 35 and 45. Embrace a safer and more convenient way to communicate behind the wheel with the BMW R53.

Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
R50 0214 Z
Retrofit Hands-Free Kit for Siemens Mobile Phones Series 35 and 45
MINI (R50 and R53)
The installation time is approx. 2 hours, but this may vary depending on the condition of the car and the
equipment in it.
Retrofit/Installation kit No. 84 64 0 139 563
84 64 0 142 864
Parts and Accessories
Installation Instructions
EN/2
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
Contents
Section Page
Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Installation and cabling diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Hands-free kit connection overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. To install and connect the wiring harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. To install the loudspeaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7. To install the hands-free microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8. To install the mobile phone holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9. To install the hands-free control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10. Concluding work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
11. Hands-free kit circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
EN/3
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
Important information
The retrofit kit is only for use within the dealership organisation.
Do not kink or damage the cables during the installation work since otherwise they may cause faults that can
later only be identified by extensive additional work. The costs incurred as a result of this will not be
reimbursed.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
This system does not require coding
Target group
The target group for these installation instructions is specialist personnel trained on MINI cars with specialist
knowledge of vehicle electrical systems.
Work:
All servicing, repair and installation work on MINI cars is completed at your own risk.
All work is to be carried out using current MINI repair manuals and circuit diagrams in a rational order using
the prescribed tools (special tools) and observing current health and safety regulations.
Required special tools
Crimping pliers for AMP contacts
Twist drill 5 mm
Step drill bit
Drill
EN/4
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
1. Preparations
0
TIS instruction No.
Conduct a brief test
Disconnect the negative pole of the battery 12 00 ...
The following components must be removed first of all:
Oddments box in instrument trim on the passenger side 51 16 390
Trim between front centre console and instrument panel 51 16 198
Radio 65 11 030
A pillar trim on the right 51 43 201
Interior mirror 51 16 060
Clock
EN/5
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
2. Parts list
0
Legend
0
1 Mobile phone holder
2 Retaining plate for the mobile phone holder
3 Loudspeaker
4 Hands-free control unit
5 Gooseneck
6 Holder for hands-free control unit
7 Wiring harness
8 Hands-free microphone
9 Plug contact (4x)
10 Plug casing (4x)
11 Socket casing (4x)
12 Socket casing (4x)
R50 0215 Z
10
2
1
3
8
4
5
6
7
9 11 12
EN/6
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
3. Installation and cabling diagram
0
Legend
0
1 Radio plug X18126
2 Wiring harness
3 Hands-free control unit
4 Gooseneck with mobile phone holder
5 Hands-free microphone
6 Loudspeaker
5
4
6
3
2
1
R50 0216 Z
EN/7
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
4. Hands-free kit connection overview
0
0
0
* Butt-joint connector and shrink hose are not included in the installation kit.
Butt-joint connector part number: 61 13 8 353 746
Shrink hose part number: 61 13 1 379 833
Item Description Signal
Cable colour /
Cross-section
Connection location in the car Abbreviation / Slot
A Wiring harness
--- --- --- ---
A1 Cable branch Earth BR
0.75 mm
2
With enclosed socket and plug contact on
radio plug
With new generation radio
Without new generation radio
X18126
PIN 12
PIN 15
A2 Cable branch Terminal 30 RT
0.75 mm
2
With enclosed socket and plug contact on
radio plug
With new generation radio
Without new generation radio
X18126
PIN 15
PIN 9
A3 Cable branch Terminal R VI
0.75 mm
2
With enclosed socket and plug contact on
radio plug
With new generation radio
Without new generation radio
X18126
PIN 16
PIN 10
A4 Cable branch Mute SW
0.35 mm
2
With enclosed socket and plug contact on
radio plug
With new generation radio
Without new generation radio
X18126
PIN 10
PIN 4
A5 Cable branch LSP+ SW
0.5 mm
2
With butt-joint connector* and shrink
hose* on SW/WS cable of the loudspeaker
---
A6 Cable branch LSP- GN
0.5 mm
2
With butt-joint connector* and shrink
hose* on SW/WS cable of the loudspeaker
---
A7 6-pin SW plug
--- ---
On hands-free control unit
---
A1
A2
A3
A4
A5A6
A7
A
R50 0223 Z
EN/8
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
5. To install and connect the wiring harness
0
0
0
0
0
Route branches
A1
A4
to the radio plug
X18126
.
Route branches
A5 – A7
to the oddments box on the
passenger side.
0
Cars with a new generation radio only
Connect branches
A1
A4
as follows to plug
X18126
:
-
A1
, BR cable, to BR cable on PIN 12
-
A2
, RT cable, to RT/GN cable on PIN 15
-
A3
, VI cable, to VI/GR cable on PIN 16
-
A4
, SW cable, to WS/BR cable on PIN 10
See figure R50 0248 Z for the procedure
0
Cars without a new generation radio only
Connect branches
A1
A4
as follows to plug
X18126
:
-
A1
, BR cable, to BR cable PIN 15
-
A2
, RT cable, to RT/GN cable PIN 9
-
A3
, VI cable, to VI/WS cable PIN 10
-
A4
, SW cable, to WS/BR cable PIN 4
See figure R50 0248 Z for the procedure
0
All cars
Cut the corresponding cable of the plug
X18126
at a
suitable point.
Crimp the socket contact (1) onto the cable end (2) of the
plug and put on the socket casing (3).
Crimp the plug contact (4) onto the open cable end (5),
crimp on the corresponding branch (7) and put on the
plug casing (6).
Connect the socket and plug casings (3+6) together.
X18126
A1-A4
A5-A7
R50 0201 Z
X18126
A1-A4
R50 0250 Z
X18126
A1-A4
R50 0249 Z
7
2
5
3
1
6
4
R50 0248 Z
EN/9
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
6. To install the loudspeaker
0
0
0
0
0
Unscrew both knurled-head bolts (1) and remove the
holder (2) from the loudspeaker (3).
Drill a 5 mm hole in the centre of the holder (2).
0
Screw the holder (1) to the trim (3) using the existing Torx
screw (2).
0
Insert the loudspeaker (1) into the holder (2) and secure it
with the knurled-head bolts (3).
Route the loudspeaker cable (4) to the oddments box on
the passenger side.
0
Connect the loudspeaker cable (1) to branches
A5
and
A6
using the butt-joint connector (2) and shrink hose (3) as
follows:
- Black/white loudspeaker cable to branch
A5
, SW cable
- Black loudspeaker cable to branch
A6
, GN cable
2
3
1
R50 0202 Z
3
1
2
R50 0203 Z
2
4
3
1
R50 0204 Z
2 3
1
A5/A6
R50 0224 Z
EN/10
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
7. To install the hands-free microphone
0
0
0
Screw the holder (1) to the headlining using Philips
screws (2) as shown.
Clip the hands-free microphone (3) into the holder (1).
Carefully lower the front headlining.
Route the microphone cable (4) beneath the headlining
towards the A pillar on the passenger side.
0
Route the microphone cable (1) to the oddments box on
the passenger side.
4
3
1
2
R50 0205 Z
1
R50 0219 Z
EN/11
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
8. To install the mobile phone holder
0
0
0
0
0
Undo the Philips screws (1) and remove the rear cover (2).
0
Place the retaining plate (1) onto the gooseneck (2) and
mark the outline.
Drill a 17 mm hole (3) in the bottom area as shown.
0
Route the cables (1) of the mobile phone holder through
the gooseneck (2) and put the rear cover (3) back on.
0
Screw the retaining plate (1) onto the gooseneck (3)
using Philips screws (2).
2
1
R50 0247 Z
1
2
3
R50 0255 Z
3
1
2
R50 0252 Z
2
1
3
R50 0225 Z
EN/12
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
8. To install the mobile phone holder
0
0
0
Push the mobile phone holder (1) onto the retaining plate
from the top.
0
Install the radio.
Install the gooseneck (1) and attach the connection cable
(2) as shown using cable ties (3). Route it to the oddments
box on the passenger side.
1
R50 0226 Z
0222
240
km/h
2
1
3
R50 0222 Z
EN/13
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
9. To install the hands-free control unit
0
0
0
0
0
Screw the hands-free control unit (1) onto the holder (3)
using Philips screws (2).
0
Connect the microphone cable plug (1), the mobile phone
holder plug (2) and branch
A7
to the hands-free control
unit (3).
0
Hook the holder (1) into the instrument carrier (2) from
behind and fasten it in place using the bar (3) and a
Philips screw (4).
0
The figure shows the installed holder (1) with the
instrument carrier removed (2).
SIEMENS
2
2
3
1
R50 0208 Z
3
1
A7
2
R50 0211 Z
2
1
3
4
R50 0246 Z
R50 0254 Z
2
1
EN/14
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
10. Concluding work
- Connect battery
- Conduct a brief test
- Conduct a function test
- Assemble the car following the instructions to dismantle it in reverse order.
EN/15
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
11. Hands-free kit circuit diagram
Cars with a new generation radio only
0
MUTE
R
30
31
A1*
1 4
LSP-
LSP+
2 3 5 6
12 15 16 10
MIC-
MIC+
Handy
A2*
A3*
A4*
X1*
X2*
X3*
X4*
X6*
X7*
X5*
X18126
Y1*
Y3*
Y2*
0.5
SW
0.5
GN
0.75
BR
0.75
RT
0.75
VI
0.35
SW
0,5 SW/WS
0,5 SW
R50 0227 Z
EN/16
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
11. Hands-free kit circuit diagram
Cars without a new generation radio only
0
MUTE
R
30
31
A1*
1 4
LSP-
LSP+
2 3 5 6
15 9 10 4
MIC-
MIC+
Handy
A2*
A3*
A4*
X1*
X2*
X3*
X4*
X6*
X7*
X5*
X18126
Y1*
Y3*
Y2*
0.5
SW
0.5
GN
0.75
BR
0.75
RT
0.75
VI
0.35
SW
0,5 SW/WS
0,5 SW
R50 0228 Z
EN/17
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001
11. Hands-free kit circuit diagram
Legend
All designations with an asterisk (*) only apply to these installation instructions and these circuit diagrams.
Cable colours
A1* Hands-free control unit
A2* Hands-free microphone
A3* Loudspeaker
A4* Mobile phone holder
X1* SW 2-pin pawl plug
X2* SW 12-pin plug
X3* SW 6-pin plug
X4* Twin-lead terminal
X5* Twin-lead terminal
X6* Twin-lead terminal
X7* Twin-lead terminal
X18126 Radio plug
Y1* Butt-joint connector
Y2* Butt-joint connector
Y3* To standard wiring harness
RT red
SW black
GN green
BR brown
VI violet
WS white
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

BMW R53 Installation Instructions Manual

Type
Installation Instructions Manual
This manual is also suitable for

BMW R53: Enhance your driving experience with a seamless hands-free communication system. Stay connected while keeping your focus on the road. Enjoy crystal-clear calls and effortless control of your mobile phone's audio functions. The integrated loudspeaker ensures optimal sound quality, while the adjustable gooseneck positions the microphone perfectly for clear voice transmission. Installation is a breeze, and the kit is compatible with Siemens Mobile Phones Series 35 and 45. Embrace a safer and more convenient way to communicate behind the wheel with the BMW R53.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI