Cambium Networks C000000L176A Operating instructions

Hello! I've reviewed the product details for the DAC Cable from Cambium Networks. This document outlines the benefits and use cases for this cable, which is designed to simplify connections between V3000 devices, offering cost savings and secure installations. I can answer your questions about this device.
What is the primary benefit of using the DAC cable?

What does the DAC cable ensure?

What installation benefit does the DAC cable provide?

What is a use case for the DAC Cable?

System Hardware 62

Figure 43:

DAC Cable

Note

Cambium Networks recommends to use the cable gland (part number: C000000L176A -

Cable Gland for 6 mm cable, M25, Qty 10) with the DAC cable for 60 GHZ cnWave products.

Following are some of the benefits of using the DAC cable:

lEliminates the need to buy two SFP+ transceivers and a compatible optical cable, resulting in a

reduced inventory management and a low cost solution.

lConsists of factory terminated and ensures watertight sealing.

lPrevents installation errors when terminating optical cables to SFP+ transceivers.

Use cases

Following are the use cases of the DAC cable:

lConnecting a V3000-to-V3000 backhauled link

With the use of the DAC cable, the V3000 devices can achieve an aggregate speed of up to 3.6

Gbps.

Typically, a multi-hop point-to-point link deployment, which connects two back-to-back V3000

devices, requires the use of 10 Gig SFP+ interface. In such cases, the DAC cable (from Cambium

Networks) can be used, instead of two SFP+ transceivers and an optical cable, to backhaul the

traffic (as shown in Figure 44).