4R70E

Motologic 4R70E Operating instructions

  • Hello, I've reviewed the user manual for the Ford E-450's 4R70E/4R75E Transmission Range Sensor. This document provides detailed instructions on how to remove and install the sensor, including the use of a special alignment tool. I'm ready to answer your questions about the repair process and specifications outlined in this manual.
  • What special tool is required for the repair?
    What is the torque specification for the digital TR sensor bolts?
    What is the torque specification for the manual control lever outer nut?
5/19/2021
2006 Ford E-450 • MotoLogic
https://www.motologic.com/car/f1675450-ca4d-012b-1090-fbb1677812c1/article/a86f6900-44eb-012a-75cd-f5f6d9ffb875?returnPath=%2Fcar%2Ff167
1/4
Report a problem with this article
Automatic Transaxle/Transmission — 4R70E/4R75E - Digital Transmission Range (TR)
Sensor - in Vehicle Repair
SECTION 307-01A: Automatic Transaxle/Transmission — 4R70E/4R75E 2006 E-Series Workshop Manual
IN-VEHICLE REPAIR Procedure revision date: 03/30/2005
Digital Transmission Range (TR) Sensor
Special Tool(s)
Alignment Gauge, TR Sensor
307-351 (T97L-70010-A)
Digital Transmission Range (TR) Sensor
Item Part Number Description
1 Digital transmission range (TR) sensor electrical connector
2 7E395 Selector lever cable
3 N808737-S Manual lever nut
5/19/2021
2006 Ford E-450 • MotoLogic
https://www.motologic.com/car/f1675450-ca4d-012b-1090-fbb1677812c1/article/a86f6900-44eb-012a-75cd-f5f6d9ffb875?returnPath=%2Fcar%2Ff167
2/4
4 7A256 Manual lever
5 N806933-S Digital TR sensor bolts
6 7F293 Digital TR sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
2. Disconnect the digital transmission range (TR) sensor electrical connector.
3. Disconnect the selector lever cable from the manual control lever.
4. Remove the manual control lever.
1. Remove the manual control lever outer nut.
2. Remove the manual control lever.
5. Remove the digital TR sensor bolts and sensor.
Installation
1. Loosely install the digital TR sensor bolts and sensor.
5/19/2021
2006 Ford E-450 • MotoLogic
https://www.motologic.com/car/f1675450-ca4d-012b-1090-fbb1677812c1/article/a86f6900-44eb-012a-75cd-f5f6d9ffb875?returnPath=%2Fcar%2Ff167
3/4
2. NOTE: The manual shift lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
3. CAUTION: Tightening one screw before tightening the other may cause the digital TR sensor to bind or
become damaged.
Tighten the digital TR sensor bolts.
Tighten to 9 Nm (80 lb-in).
4. Install the manual control lever.
1. Position the manual control lever.
2. Install a new manual control lever outer nut.
Tighten to 33 Nm (24 lb-ft).
5. Connect the selector lever cable end to the manual control lever with the manual control lever in the NEUTRAL
position.
5/19/2021
2006 Ford E-450 • MotoLogic
https://www.motologic.com/car/f1675450-ca4d-012b-1090-fbb1677812c1/article/a86f6900-44eb-012a-75cd-f5f6d9ffb875?returnPath=%2Fcar%2Ff167
4/4
6. Install the digital TR sensor electrical connector.
/