Motologic 2A451 User manual

11/20/22, 6:20 PM

2017 Ford Fusion Hybrid • MotoLogic

https://www.motologic.com/car/2017_fd_fusion_hybrid_1270/article/2017_fd_fusion_hybrid_1270_8eddd1e928df6a11dfdc732c5e9652cc?returnPath=…

1/4

Report a problem with this article

Power Brake Actuation - Brake Vacuum Pump - Removal and Installation

206-07 Power Brake Actuation 2017 Fusion Hybrid/Energi

Removal and Installation Procedure revision date: 06/5/2013

Brake Vacuum Pump

Base Part Number: 2A451 Base Part Number: 2A451

Special Tool(s) / General Equipment

Vise

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Cooling Fan Motor and Shroud (303-03A Engine Cooling - 2.0L Duratec - Hybrid (96kW/130PS),

Removal and Installation).

3. Torque: 89 lb.in (10 Nm)

11/20/22, 6:20 PM

2017 Ford Fusion Hybrid • MotoLogic

https://www.motologic.com/car/2017_fd_fusion_hybrid_1270/article/2017_fd_fusion_hybrid_1270_8eddd1e928df6a11dfdc732c5e9652cc?returnPath=…

2/4

5. Torque: 35 lb.ft (48 Nm)

6. Use the General Equipment: Vise

11/20/22, 6:20 PM

2017 Ford Fusion Hybrid • MotoLogic

https://www.motologic.com/car/2017_fd_fusion_hybrid_1270/article/2017_fd_fusion_hybrid_1270_8eddd1e928df6a11dfdc732c5e9652cc?returnPath=…

3/4

Installation

1. To install, reverse the removal procedure.

2. NOTE: Install new brake vacuum pump bracket isolators as necessary.

11/20/22, 6:20 PM

2017 Ford Fusion Hybrid • MotoLogic

https://www.motologic.com/car/2017_fd_fusion_hybrid_1270/article/2017_fd_fusion_hybrid_1270_8eddd1e928df6a11dfdc732c5e9652cc?returnPath=…

4/4

Download PDF