Motologic 4R70E Operating instructions

Brand: Motologic

Model: 4R70E

Type: Operating instructions

Motologic 4R70E is a highly specialized tool designed to aid in the repair and maintenance of Ford E-Series vehicles equipped with 4R70E/4R75E automatic transmission systems. With its advanced capabilities, this tool empowers users to efficiently diagnose, troubleshoot, and rectify transmission-related issues, ensuring optimal vehicle performance and reliability.

5/19/2021

2006 Ford E-450 • MotoLogic

https://www.motologic.com/car/f1675450-ca4d-012b-1090-fbb1677812c1/article/a86f6900-44eb-012a-75cd-f5f6d9ffb875?returnPath=%2Fcar%2Ff167…

1/4

Report a problem with this article

Automatic Transaxle/Transmission — 4R70E/4R75E - Digital Transmission Range (TR)

Sensor - in Vehicle Repair

SECTION 307-01A: Automatic Transaxle/Transmission — 4R70E/4R75E 2006 E-Series Workshop Manual

IN-VEHICLE REPAIR Procedure revision date: 03/30/2005

Digital Transmission Range (TR) Sensor

Special Tool(s)

Alignment Gauge, TR Sensor

307-351 (T97L-70010-A)

Digital Transmission Range (TR) Sensor

Item Part Number Description

1 — Digital transmission range (TR) sensor electrical connector

2 7E395 Selector lever cable

3 N808737-S Manual lever nut

↻

5/19/2021

2006 Ford E-450 • MotoLogic

https://www.motologic.com/car/f1675450-ca4d-012b-1090-fbb1677812c1/article/a86f6900-44eb-012a-75cd-f5f6d9ffb875?returnPath=%2Fcar%2Ff167…

2/4

4 7A256 Manual lever

5 N806933-S Digital TR sensor bolts

6 7F293 Digital TR sensor

Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.

2. Disconnect the digital transmission range (TR) sensor electrical connector.

3. Disconnect the selector lever cable from the manual control lever.

4. Remove the manual control lever.

1. Remove the manual control lever outer nut.

2. Remove the manual control lever.

5. Remove the digital TR sensor bolts and sensor.

Installation

1. Loosely install the digital TR sensor bolts and sensor.

↻

5/19/2021

2006 Ford E-450 • MotoLogic

https://www.motologic.com/car/f1675450-ca4d-012b-1090-fbb1677812c1/article/a86f6900-44eb-012a-75cd-f5f6d9ffb875?returnPath=%2Fcar%2Ff167…

3/4

2. NOTE: The manual shift lever must be in the NEUTRAL position.

Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.

3. CAUTION: Tightening one screw before tightening the other may cause the digital TR sensor to bind or

become damaged.

Tighten the digital TR sensor bolts.

Tighten to 9 Nm (80 lb-in).

4. Install the manual control lever.

1. Position the manual control lever.

2. Install a new manual control lever outer nut.

Tighten to 33 Nm (24 lb-ft).

5. Connect the selector lever cable end to the manual control lever with the manual control lever in the NEUTRAL

position.

↻

5/19/2021

2006 Ford E-450 • MotoLogic

https://www.motologic.com/car/f1675450-ca4d-012b-1090-fbb1677812c1/article/a86f6900-44eb-012a-75cd-f5f6d9ffb875?returnPath=%2Fcar%2Ff167…

4/4

6. Install the digital TR sensor electrical connector.

↻

Motologic 4R70E Operating instructions

Motologic 4R70E Operating instructions

Motologic 4R70E Operating instructions

Related papers

Other documents