2. VYNCO
  3. VM85SK

VYNCO VM85SK Installation guide

  • Hello! I've reviewed the installation instructions for the Vynco VM surface mount kits, including models VM17SK, VM34SK, VM51SK, and VM85SK. This document outlines the steps to securely mount the enclosures on a wall and install the respective VM boards. The kits are made of powder-coated steel, feature ample knockouts and cable entries and are covered by a 1 year warranty. I'm here to help answer any questions you might have about these installation processes or the product itself.
  • What is the material of the surface mount kit?
    What is the warranty period for this product?
    Can this kit be used for retrofitting?
INSTALLATION INSTRUCTIONS
AUCKLAND
9 Levene Place, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061
New Zealand
P +64 9 525 6051 F +64 9 525 5799
VYNCO INDUSTRIES (NZ) LIMITED
CHRISTCHURCH
388 Tuam Street, Phillipstown, Christchurch, 8011
PO Box 9022, Tower Junction, Christchurch 8149
New Zealand
P +64 3 379 9283 F +64 3 379 6838
E [email protected]
VYNCO.CO.NZ
VM17SK / VM34SK / VM51SK / VM85SK - VM SURFACE MOUNT KIT
INSV0061
SPECIFICATIONS
Material Powdercoated steel
DIMENSIONS
VM17SK 341 x 411 x 107mm
VM34SK 491 x 411 x 107mm
VM51SK 641 x 411 x 107mm
VM85SK 976 x 411 x 107mm
SAFETY
The VM Surface Mount Kits are intended to be
surface mounted onto a wall and then one of the
boards in the Vynco VM range (VM17, VM34, VM51,
VM68 and VM85) can be tted to its respective
surface mount kit.
These kits can be used for new installs or in a
retro-t situation to replace old style boards.
There are ample knockouts and cable entries
to accommodate almost any wiring layout.
WARRANTY
This product is covered by a 1 Year Vynco Warranty -
proof of purchase is required. Please contact Vynco
for details of returns procedure.
NOTE: This product contains NO user serviceable parts.
VM17SK
INSTALLATION PROCEDURE
STEP 1
Screw the surface mount enclosure securely
to the wall.
STEP 2
Fit VM board into enclosure and line up the xing
holes with the M6 rivnuts. Using the M6 screws
supplied, screw the respective VM board into the
surface mount kit.
STEP 3
Fit off cover assembly as per normal wall
installation using screws supplied.
STEP 2
STEP 1
STEP 1
STEP 3
VM34SK
VM17SK
VM85SK
VM51SK
/