Schneider Electric Altivar Process ATV900 Operating instructions

Altivar Process ATV900
Schneider Electric
Brand
Schneider Electric
Model
Altivar Process ATV900
Type
Operating instructions
Product End of Life Instructions
VARIABLE SPEED DRIVE ATV630 IP55 5,5KW 400/480V
DISCONNECT SWITCH
Altivar Process ATV600/900
ENVPEP1508009_V3 11/2021
83%
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1,
20 Sep. 2008 presented to the French Agency for Environment and Energy
Management: ADEME).
In case of special transportation:
transportation method
Legal information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
No special tranportation.
Recyclability potential
Safety Information
Introduction and Scope
Purpose
This document is intended for use by professional end of life recyclers or waste treatment
facilities. It provides the basic information for proper end-of-life treatment of product components
and materials.
ENVPEP1508009_V3 11/2021
End of Life Instructions
1
8
See the identified and located
below on the next page
3
See note
below
1
8
8
6
6
6
9
9
ENVPEP1508009_V3 11/2021
1
1
4
1
1
5
7
8
8
8
8
8
6
ENVPEP1508009_V3 11/2021
Weight (in
g)
781
25
2,9
405
175
5240
498
4219
25
1089,1
www.schneider-electric.com
ENVPEP1508009_V3
Published by Schneider Electric
© 2021 - Schneider Electric – All rights reserved
To be dismantled
8
PC, ABS-PC, PA, PA6, HDPE, SAN
with or without additive, PP+EPDM and
PP
Housing, Chassis, cover
To be depolluted
2
LCD and all those back-lighted with
gas discharge lamps
To be depolluted
3
Other battery
Lithium content: 0,07 g
To be depolluted
Product description
Manufacturer identification
Schneider Electric Industries SAS
Representative product
VARIABLE SPEED DRIVE ATV630 IP55 5,5KW 400/480V DISCONNECT SWITCH -
ATV650U55N4E
This range consists of products Altivar 650 and Altivar 950 with ratings from 0,75 to 11 kW for
operation on 400V/480V, 3-phase supplies IP55.
Date of information release
12460 g
11/2021
Accessories
No accessories needed.
RCS Nanterre 954 503 439
Capital social 896 313 776 €
Copper
Bar
Brand name
Schneider Electric
1
Electronic Board (Power and
Communication) > 10cm²
Other
The main function of the Altivar Process product range is the speed control and variation of a
synchronous, asynchronous or reluctance electric motor for fluid management and industrial
applications.
11/2021
Product function
Description of the range
Total representative product mass
Representative product dimensions
Country Customer Care Center
http://www.schneider-electric.com/contact
35 rue Joseph Monier
CS 30323
FR 92500 Rueil Malmaison
Schneider Electric Industries SAS
678 mm x 264 mm x 300 mm
Recommendation
Comment
Number on
drawing
Component / Material
To be depolluted
To be dismantled
9
To be dismantled
To be dismantled
7
Aluminium
Heatsink
To be depolluted
4
Cable (high current)
6
Steel
Bar, Ground plate, Support
5
Electrolyte capacitors which size:
height > 25 mm, diameter > 25 mm or
proportionately similar volume
Coin battery
inside
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Schneider Electric Altivar Process ATV900 Operating instructions

Altivar Process ATV900
Schneider Electric
Brand
Schneider Electric
Model
Altivar Process ATV900
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents