Schneider Electric Altivar Process ATV600/900 Variable Speed Drive Operating instructions

Schneider Electric
Brand
Schneider Electric
Model
Altivar Process ATV600/900 Variable Speed Drive
Type
Operating instructions
Product End of Life Instructions
VARIABLE SPEED DRIVE ATV650 IP55 90KW 400/480V
DISCONNECT SWITCH
Altivar Process ATV600/900
ENVEOLI1506002_V2 11/2021
84%
Potential disassembly risks
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1,
20 Sep. 2008 presented to the French Agency for Environment and Energy
Management: ADEME).
Additional information
Recyclability potential
In case of special transportation:
transportation method
Legal information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
No special tranportation.
This document is intended for use by professional end of life recyclers or waste treatment
facilities. It provides the basic information for proper end-of-life treatment of product components
and materials.
Purpose
ENVEOLI1506002_V2 11/2021
End of Life Instructions
2
6
6
See the identified and
located below on the
next page
1
1
8
6
6
6
8
1
ENVEOLI1506002_V2 11/2021
1
5
7
6
6
9
1
4
1
ENVEOLI1506002_V2 11/2021
Weight (in
g)
4996
25
2,9
1449
3240
53497
10984
1002
1229
10575,1
www.schneider-electric.com
ENVEOLI1506002_V2
Published by Schneider Electric
© 2021 - Schneider Electric – All rights reserved
To be depolluted
2
To be depolluted
Steel
Housing, Front door, Cover,
Ground plate, Support, Bar
4
To be depolluted
5
To be dismantled
6
Aluminium
Heatsink, Bar
Cable (high current)
Electrolyte capacitors which size:
height > 25 mm, diameter > 25 mm or
proportionately similar volume
To be depolluted
1
Electronic Board (Power and
Communication) > 10cm²
Other
To be dismantled
7
LCD and all those back-lighted with
gas discharge lamps
To be depolluted
To be dismantled
8
PC, ABS-PC, PA, PA6, HDPE, SAN
with or without additive, PP+EPDM and
PP
Housing, Chassis, Front cover
Number on
drawing
Component / Material
Recommendation
11/2021
Product function
Description of the range
Total representative product mass
Representative product dimensions
Country Customer Care Center
http://www.schneider-electric.com/contact
35 rue Joseph Monier
CS 30323
FR 92500 Rueil Malmaison
Schneider Electric Industries SAS
1250 mm x 345 mm x 436 mm
RCS Nanterre 954 503 439
Capital social 896 313 776 €
To be dismantled
9
Copper
Bar
3
Other battery
Lithium content: 0,07 g
Comment
This range consists of products Altivar 650 and Altivar 950 with ratings from 55 to 90 kW for
operation on 400V/480V, 3-phase supplies IP55.
Date of information release
87000 g
11/2021
Accessories
No accessories needed.
Brand name
Schneider Electric
Product description
The main function of the Altivar Process product range is the speed control and variation of a
synchronous, asynchronous or reluctance electric motor for fluid management and industrial
applications.
Manufacturer identification
Schneider Electric Industries SAS
Representative product
VARIABLE SPEED DRIVE ATV650 IP55 90KW 400/480V DISCONNECT SWITCH -
ATV650D90N4E
Coin battery
inside
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Schneider Electric Altivar Process ATV600/900 Variable Speed Drive Operating instructions

Schneider Electric
Brand
Schneider Electric
Model
Altivar Process ATV600/900 Variable Speed Drive
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents