Schneider Electric ATV630D22N4 Operating instructions

ATV630D22N4
Schneider Electric
Brand
Schneider Electric
Model
ATV630D22N4
Type
Operating instructions

This manual is also suitable for

Schneider Electric ATV630D22N4 is a variable speed drive designed for fluid management and industrial applications. It offers precise speed control and variation for synchronous, asynchronous, or reluctance electric motors, making it suitable for a wide range of equipment. With a power rating of 22kW and the ability to operate on 400V/480V, 3-phase power, this drive can handle demanding applications.

Schneider Electric ATV630D22N4 is a variable speed drive designed for fluid management and industrial applications. It offers precise speed control and variation for synchronous, asynchronous, or reluctance electric motors, making it suitable for a wide range of equipment. With a power rating of 22kW and the ability to operate on 400V/480V, 3-phase power, this drive can handle demanding applications.

Altivar Process ATV600/900
Product End of Life
Instructions
VARIABLE SPEED DRIVE ATV630 IP21 22KW 400V/480V
ENVEOLI1404008_V3 11/2021
77%
Safety Information
In case of special transportation:
transportation method
No special tranportation.
Recyclability potential
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1, 20
Sep. 2008 presented to the French Agency for Environment and Energy Management:
ADEME).
Introduction and Scope
Legal Information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE).
This product may only be dismantled/disassembled and disposed of by appropriately trained
persons and in compliance with all applicable regulations.
Purpose
This document is intended for use by professional end of life recyclers or waste treatment facilities.
It provides the basic information for proper end-of-life treatment of product components and
materials.
ENVEOLI1404008_V3 11/2021
End of Life Instructions
2
1
1
1
3
See note
6
8
8
ENVEOLI1404008_V3 11/2021
1
1
1
5
4
4
6
6
6
6
6
6
7
8
8
8
8
8
8
ENVEOLI1404008_V3 11/2021
Weight (in
g)
1721
25
2,9
550
525
1820
2484
3296
4036,1
5
Electrolyte capacitors which size:
height > 25 mm, diameter > 25 mm or
proportionately similar volume
To be depolluted
6
Steel
Bar, Baseplate
2
To be depolluted
3
Other battery
Lithium content: 0,07 g
To be dismantled
7
Aluminium
Heatsink
PC, ABS-PC, PA, PA6, HDPE, SAN
with or without additive, PP+EPDM and
PP
Housing, Support, Cover, Chassis
To be depolluted
1
Electronic Board (Power and
Communication) > 10cm²
8
Other
To be dismantled
To be depolluted
4
Cable (high current)
To be depolluted
To be depolluted
LCD and all those back-lighted with gas
discharge lamps
Recommendation
Comment
Number on
drawing
Component / Material
Coin
inside
ENVEOLI1404008_V3 11/2021
www.se.com Published by Schneider Electric
ENVEOLI1404008_V3 © 2021 - Schneider Electric – All rights reserved
Brand name
Schneider Electric
Product description
Manufacturer identification
Schneider Electric Industries SAS
RCS Nanterre 954 503 439
Capital social 896 313 776 €
The main function of the Altivar Process product range is the speed control and variation of a
synchronous, asynchronous or reluctance electric motor for fluid management and industrial
applications.
VARIABLE SPEED DRIVE ATV630 IP21 22KW 400V/480V - ATV630D22N4
Date of information release
14,46 kg
11/2021
Accessories
No accessories needed.
Description of the range
This range consists of products Altivar 630, Altivar 930 and Altivar 955 with ratings from 7.5 to 11
kW for operation on 200V/240V and ratings from 15 to 22 kW for operation on 400V/480V, 3-phase
supplies IP21/UL type 1.
11/2021
Description of the product
Representative product
Total representative product mass
Representative product dimensions
Country Customer Care Center http://www.se.com/contact
35, rue Joseph Monier
CS 30323
FR- 92500 Rueil Malmaison Cedex
Schneider Electric Industries SAS
211mm x 546mm x 232mm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Schneider Electric ATV630D22N4 Operating instructions

ATV630D22N4
Schneider Electric
Brand
Schneider Electric
Model
ATV630D22N4
Type
Operating instructions
This manual is also suitable for

Schneider Electric ATV630D22N4 is a variable speed drive designed for fluid management and industrial applications. It offers precise speed control and variation for synchronous, asynchronous, or reluctance electric motors, making it suitable for a wide range of equipment. With a power rating of 22kW and the ability to operate on 400V/480V, 3-phase power, this drive can handle demanding applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents