2. Computers & electronics
  3. TVs & monitors
  4. Flat panel accessories
  5. Schneider Electric
  6. 00041
00041

Schneider Electric 00041 Operating instructions

  • Hello, I'm your chat assistant. I've reviewed the document on the Schneider Electric MCB E-Frame, specifically the E-Frame EDB14020EPD model. It provides end-of-life instructions, details its components, and mentions its 31% recyclability potential. I’m ready to answer your questions about its features, disposal, and relevant information.
  • What is the main purpose of the MCB E-Frame?
    What is the recyclability potential of the MCB E-Frame?
    What directive does this product family fall under?
ENVEOLI1405001_V2 - End of Life Instructions - MCB E-Frame
MCB E-Frame
Product End of Life
Instructions
#Internal
ENVEOLI1405001_V2 11/2021
ENVEOLI1405001_V2 - End of Life Instructions - MCB E-Frame
Weight (in
g)
79.13
31%
Brand name
Square D
To be depolluted
1
Including all soldering parts
Comment
Number on
drawing
Product description
Manufacturer identification
Schneider Electric Industries SAS
End of Life Instructions
Recommendation
Product function
Product reference
Total representative product mass
Representative product dimensions
Recyclability potential
169mm x 50mm x 103mm
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1,
20 Sep. 2008 presented to the French Agency for Environment and Energy
Management: ADEME).
In case of special transportation:
transportation method
Legal information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
No
Additional information
The main purpose of the MCB E-Frame is to ensure protection of low voltage electrical
installations.
EDB14020EPD
Date of information release
910 g
11/2021
Accessories
No
1
#Internal
ENVEOLI1405001_V2 11/2021
ENVEOLI1405001_V2 - End of Life Instructions - MCB E-Frame
www.schneider-electric.com Published by Schneider Electric
ENVEOLI1405001_V2 © 2019 - Schneider Electric – All rights reserved
11/2021
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
Schneider Electric Industries SAS
RCS Nanterre 954 503 439
Capital social 896 313 776 €
#Internal
ENVEOLI1405001_V2 11/2021
/