datasheet
19” subracks
Austin Taylor Communications Ltd reserves the right to change the specification of the products described in this datasheet without notice
Copyright © 2001 Austin Taylor Communications Ltd, Revision Date 27th July 2001 Datasheet No: CB02B
Austin Taylor Communications Ltd
Bethesda, Gwynedd, Ll57 3BX, UK
A subsidiary of
Communications Systems Inc.
UK Tel: 01248 602555
UK Fax: 01248 600370
Int. Tel: +44 1248 602555
Int. Fax: +44 1248 600370
http://www.austin-taylor.co.uk
BS EN ISO 9001
Reg No: Q5117
Ordering Information
AUSTINAUSTIN
TAYLORTAYLOR
1
1
1
1
1
1
1
1
1U subrack (3 way) flat
2U subrack (9 way) flat
3U subrack (15 way) flat
4U subrack (18 way) flat
1U subrack (3 way) recessed
2U subrack (9 way) recessed
3U subrack (15 way) recessed
4U subrack (18 way) recessed
9RAC193817
9RAC193818
9RAC193811
9RAC193812
9RAC193806
9RAC193807
9RAC193801
9RAC193802
Carton
Multiple
Description
Part No.
The Austin Taylor range of 19” subracks allows
10 pair Insulation Displacement Connection (IDC)
strips to be fitted to any standard 19” rack.
The subracks are available in a range of
capacities:
1U (3 way = 30 pairs)
2U (9 way = 90 pairs)
3U (15 way = 150 pairs)
4U (18 way = 180 pairs)
In addition each size of subrack is available in flat
or recessed versions to allow them to be used in
both open racks or enclosed cabinets.
Ample provision is made for wire management
with a total of 8 high capacity jumper rings.
3U Recessed Subrack
Accepts 15 x 10 pair IDC strips (150 pairs)
3U Flat Subrack
Accepts 15 x 10 pair IDC strips (150 pairs)
/
