Page is loading ...
datasheet
RJ11 style Linejacks
The Austin Taylor range of RJ11
style linejacks features 6
poisition, 6 conductor Western
Electric style sockets.
All variants are shuttered and
use Krone style IDC terminals
for fast and efficient installation.
The 2 Series variant supports a
single line and is supplied with a
surface mount back-box.
The 3 Series variant supports a single line and is
suitable for surface or flush mounting onto a
standard BS3662 size UA1 (LJ3) backbox.
The 4 Series variant supports two separtate lines
and is suitable for surface or flush mounting onto
a standard BS3662 size UA1 (LJ3) backbox.
Dimensions (2 Series) 86mm x 86mm x 21mm
Colour Bright white (BT 1P)
Faceplate material ABS
Wire termination Krone style IDC -
colour coded to T568B
RJ11 sockets 6 position, 6 contact.
Gold plated contacts
Accessories
(2 Series)
Supplied with cable tie(s) &
fixing screws for supplied
backbox
Austin Taylor Communications Ltd reserves the right to change the specification of the products described in this datasheet without notice
Copyright © 2001 Austin Taylor Communications Ltd, Revision Date 21st June 2001 Datasheet No: LJ08B
Austin Taylor Communications Ltd
Bethesda, Gwynedd, Ll57 3BX, UK
A subsidiary of
Communications Systems Inc.
UK Tel: 01248 602555
UK Fax: 01248 600370
Int. Tel: +44 1248 602555
Int. Fax: +44 1248 600370
http://www.austin-taylor.co.uk
BS EN ISO 9001
Reg No: Q5117
Technical Summary
200
200
200
2 Series RJ11 linejack (WE 6/2/3A)
3 Series RJ11 linejack (WE 6/3/3A)
4 Series RJ11 linejack (WE 6/4/3A)
9LJU167260
9LJU163820
9LJU163880
Ordering Information
Carton
Multiple
Description Part No.
AUSTINAUSTIN
TAYLORTAYLOR
Dimensions (3&4 Series) 86mm x 86mm x 21mm
Accessories
(3&4 Series)
Supplied with cable tie(s) &
fixing screws for standard
backboxes (which are
available separately)
2 Series RJ11 linejack
supplied with backbox
/
