Neutrik BNC Cable Jack Tiny Assembly Instruction

Neutrik
Brand
Neutrik
Model
BNC Cable Jack Tiny
Type
Assembly Instruction
Slide the boot onto the cable
Slide the crimp ferrule onto the cable
Spread the braided shield
- position the pin on the center conductor
- Crimp the pin with the tool
- Pin can also be soldered (Optional)!
- Straighten the pin if misaligned.
crimp
and push the cable and leading ferrule to it`s end
position until you hear a snap noise.
Crimp the ferrule with the tool
(It`s easily with the NEUTRIK
“SHIELD-SPREADING-TOOL“!)
(For best crimping-results it is recommended to use the
Original Neutrik tool - HXBNC with the corresponding insert)
(For best crimping-results it is recommended to use the
original Neutrik crimp tool
- HXBNC with the corresponding insert
or hexcrimp acc. to IEC 803-W (SW 1.7)
or squarecrimp acc. to IEC 803-2 (SW 1.6)
Prepare cable as shown
- Use an adjustable coaxial cable stripper
®
Slide the leading ferrule on the cable
Crimp the pin
Insert the cable into the connector body
Snap the boot onto the connector body
Slide the ferrule over the shield to the front
Please note:
Position the connector body
Flush with the die face.
A
A
B
C
D
D
E
E
F
F
G
H
I
J
B
C
H
C: 5 [.20”]
B: 8 [.32”]
A: 15 [.59”]
Don't damage the foil!
(if existing)
Slide the leading ferrule
under the shield!
Crimp ferrule
Boot
X
I
CRIMP
OPERATION!
Pin flush to the insulator
G
H
J
X
H
BNC 75 Cable Jack Tiny
| Ω
ASSEMBLY INSTRUCTION
Draft. Nr.: BDA 108 Update: 09.04.2008 / 3102M1131
I I Data subject to change without prior notice. 2008NEUTRIK . ALL RIGHTS RESERVED.©Æ
www.neutrik.com
NEUTRIK AG
NEUTRIK Z¸ rich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
( )
LI
CH
USA
UK
T: F:
T: F:
T: F:
T: F:
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811 441 +44 1983 / 811 439
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH
Ltd.Hong Kong
DE / NL / AT
FR
JP
HK
T: F:
T: F:
T: F:
T: F:
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 /
2687 6052
Assembled Connector
  • Page 1 1

Neutrik BNC Cable Jack Tiny Assembly Instruction

Neutrik
Brand
Neutrik
Model
BNC Cable Jack Tiny
Type
Assembly Instruction
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents