Extron XTP R HWP 201 User manual

Extron
Brand
Extron
Model
XTP R HWP 201
Type
User manual

This manual is also suitable for

XTP R HWP 201 4K
XTP Systems
XTP Receiver — Decorator-Style Wallplate
User Guide
68-2908-01 Rev. A
02 19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within the
product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf
aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes
gefährliche Spannungen herrschen, die nicht isoliert sind und die einen
elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire
l’utente della presenza di importanti istruzioni di funzionamento e
manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности • Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 • 简体中文
警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压，
有触电危险。
注意： 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修）说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见
Extron 安全规范指南，产品编号 68-290-01。
Copyright
© 2019 Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (
®
), registered service marks (
SM
), and trademarks (
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Global Configurator,
GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA,
PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch, SystemINTEGRATOR,
TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
™
)
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS(ClassD Ripple
Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), Room Agent, Scope-Trigger,
ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, StudioStation, Triple-Action Switching, True4K, Vector™ 4K , WebShare,
XTRA, and ZipCaddy
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
安全記事 • 繁體中文
警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著
可能會導致觸電之風險的未絕緣危險電壓。
注意 若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有
重要的操作和維護（維修）説明。
有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資
訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規
遵守手冊》，準則編號 68-290-01。
安全上のご注意 • 日本語
警告: この記号 が製品上に表示されている場合は、筐体内に絶縁されて
いない高電圧が流れ、感電の危険があることを示しています。
注意:この記号 が製品上に表示されている場合は、本機の取扱説明書に
記載されている重要な操作と保守(整備)の指示についてユーザーの注意
を喚起するものです。
安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エ ク スト ロ ン の ウ ェブ サ イト www.extron.com よ り 『 Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION: The Twisted Pair Extension technology works with unshielded twisted
pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are required.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory
Compliance Guide” on the Extron website.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
ATTENTION:
• Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses used in this
guide, the character “0” is used for the number zero and “O” is the capital letter
“o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
xiiXTP R HWP 201 4K Wallplate Receiver • Contents
Contents
Introduction ...............................................1
Guide Overview ................................................... 1
XTP R HWP 201 4K Wallplate Receiver
Description ......................................................... 1
System Compatibility ........................................... 2
Features .............................................................. 2
Installation .................................................4
Installation Overview ............................................ 4
Metal Junction Box or Mud Ring Installation ........ 5
Mounting Surface Preparation ......................... 5
Mud Ring Installation ....................................... 6
UL Listed Metal Junction Box Installation ......... 7
Rear and Side Panel Connectors ......................... 8
Mounting the XTP R HWP 201 4K ....................... 9
Front Panel Connectors ..................................... 10
Connection Details ............................................ 11
HDMI Connection .......................................... 11
TP Cable Termination and
Recommendations ....................................... 12
RS-232 and IR Over XTP Communication ..... 14
Power Connection ......................................... 14
Operation .................................................17
Front Panel Features .......................................... 17
HDMI Audio Switch ........................................... 17
Audio Output Overview ...................................... 18
Reset Mode ....................................................... 18
Side Panel Indicators ......................................... 19
SIS Configuration and Control .................20
Host Device Connection .................................... 20
SIS Overview ..................................................... 20
Host-to-Device and Device-to-Host
Communication ............................................ 20
Error Responses ............................................ 20
Using the Command and Response Tables
for SIS Commands ....................................... 21
Symbol Definitions ......................................... 21
Command and Response Tables for SIS
Commands ...................................................... 22
Audio Configuration Commands .................... 22
Advanced Configuration Commands ............. 23
XTP System Configuration Software ........24
Software Installation........................................... 24
Software Download Center Page ................... 24
Software Product Page .................................. 25
Software Operation............................................ 26
Connections .................................................. 26
Menu Bar ...................................................... 27
Device Settings .............................................. 30
Reference Information ............................. 32
Mounting Template ............................................ 32
XTP R HWP 201 4K Wallplate Receiver • Contents xiii
XTP R HWP 201 4K Wallplate Receiver • Introduction 1
Introduction
This section contains general information about this guide and the Extron
XTP R HWP 201 4K Wallplate Receiver, and selected device features. Topics in this section
include:
• Guide Overview
• XTP R HWP 201 4K Wallplate Receiver Description
• System Compatibility
• Features
Guide Overview
This guide contains installation, operation, and control procedures, as well as reference
information for the XTP R HWP 201 4K Wallplate Receiver. In this guide, the terms
“XTP R HWP 201 4K” and “receiver” are used interchangeably to refer to all models of the
XTP R HWP 201 4K Wallplate Receiver.
XTP R HWP 201 4K Wallplate Receiver Description
The Extron XTP R HWP 201 4K is a decorator-style wallplate receiver, ideal for XTP Systems
that include wall-mounted displays. The HDMI output connector is oriented upward at a
90° angle, which minimizes stress on the cable and allows for a low-profile flat panel display
installation. The receiver accepts XTP signals from up to 330 feet (100 meters) away over a
single shielded twisted pair cable. It outputs video, audio, bidirectional RS-232 and IR, and
Ethernet to the display. It also provides HDMI audio de-embedding with analog stereo audio
output and volume control.
The XTP R HWP 201 4K can be powered locally or remotely through an Extron Power
Injector or XTP matrix switcher (see Power Connection on page 14).
To configure and control the XTP R HWP 201 4K, connect a host device, such as a
computer, through the USB Config port and enter Simple Instruction Set (SIS) commands
(see SIS Configuration and Control on page 20) or use the XTP System Configuration
Software (see XTP System Configuration Software on page 24).
XTP R HWP 201 4K Wallplate Receiver • Introduction 2
The following diagram shows one way the XTP R HWP 201 4K can be integrated in an XTP
point-to-point application. The receiver can also be used with an XTP matrix switcher
(see the XTP matrix switcher user guide for more details on matrix applications and
configuration).
PWR HDCP
HDMI
HDMI IN
LAN
VGA
RESET
CONFIG
AUDIO
CLIP
AUTO
SWITCH
AUDIO IN
VGA IN
Ext
ron
X
TP T UWP 202 4K
XT
P Transmitter
Shielded
Twisted Pair
Cable
Laptops
Display
HDMI
HDMI
VGA
Audio
Extron
XTP R HWP 201 4
K
XTP Receiver
PWR
SIG
L
R
AUDIO
RS-232 IR
OVER XTP
Tx Rx Tx
RxG
LAN
HDMI OUT
AUDIO
Figure 1. Typical Point-to-Point Application Diagram
System Compatibility
The XTP R HWP 201 4K is compatible with XTP Systems, but the maximum video
resolution may be limited with different XTP devices. See the table below for maximum video
resolutions and refresh rates for various XTP Systems.
Maximum Resolution and Refresh Rates for XTP Systems
Output
Non-4K 4K Fiber 4K Twisted
Pair
4K PLUS
Input
Analog 1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
Non-4K Digital 2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
4K Fiber 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 24 Hz
4096x2160
@ 24 Hz
4K Twisted Pair 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 30 Hz
4K PLUS 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 60 Hz
XTP R HWP 201 4K Wallplate Receiver • Introduction 3
Features
• Receives video with embedded audio, bidirectional RS-232 and IR, and
Ethernet up to 330 feet (100 meters) over a shielded CATx cable —
The XTP R HWP 201 4K provides high reliability and maximum performance on an
economical and easily installed cable infrastructure.
• Unique low-profile wallplate design requires minimal space behind a flat panel
display — The HDMI port is oriented upward at a 90-degree angle to solve the
long-standing issue of limited space behind a wall-mounted display. A convenient cable
tie-down point further ensures full stabilization of the connection.
• Wall mountable — Mounts in a two-gang metal junction box or the provided mud ring.
• Supports computer and video resolutions up to 4K — Supports digital signal
transmission up to 330 feet over a shielded twisted pair cable, maintaining superior
image quality at the highest resolutions.
• Compatible with CATx shielded twisted pair cable — Supports a maximum
transmission distance of 330 feet (100 meters) for all compatible resolutions when used
with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid center
conductor sizes of 24 AWG or better is recommended for optimal performance.
• Bidirectional RS-232 and IR insertion for AV device control — Bidirectional
RS-232 control and IR signals can be transmitted alongside the video signal, allowing
the remote display to be controlled without the need for additional cabling.
• HDMI 2.0 specification features — Supports HDMI 2.0 specification features
including data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, and HD lossless
audio formats
• HDCP 2.2 compliant — Ensures display of content-protected media and
interoperability with other HDCP-compliant devices.
• EDID Minder automatically manages EDID communication between connected
devices — Ensures that all sources power up properly and reliably output content for
display.
• Key Minder continuously verifies HDCP compliance for quick, reliable
switching — Key Minder authenticates and maintains continuous HDCP encryption
between input and output devices to ensure quick and reliable switching in professional
AV environments, while enabling simultaneous distribution of a single source to multiple
displays.
• Ethernet extension — Centralized 10/100 Ethernet communication can be
implemented via an Ethernet pass-through port to reduce the amount of independent
network drops required within a system.
• HDMI audio de-embedding with analog stereo audio outputs — Digital HDMI
audio is made available as a balanced or unbalanced analog stereo signal on captive
screw connectors.
• Remote power capability — For simplified installation, the receiver can be remotely
powered by the XTP matrix switcher over the twisted pair connection.
• Supports multiple embedded audio formats
• Supports EDID and HDCP transmission — DDC channels are actively buffered,
allowing continuous communication between source and display.
• Selectable HDMI audio pass-through — Front panel toggle switch enables or
disables audio signal pass-through on the HDMI output.
• Compatible with all XTP products — XTP Systems provide a flexible signal switching
and distribution solution that is completely integrated, ensuring reliable routing of
multiple digital and analog formats.
XTP R HWP 201 4K Wallplate Receiver • Installation 4
Installation
This section contains information for mounting, connecting, and wiring the
XTP R HWP 201 4K. Topics in this section include:
• Installation Overview
• Metal Junction Box or Mud Ring Installation
• Rear and Side Panel Connectors
• Mounting the XTP R HWP 201 4K
• Front Panel Connectors
• Connection Details
Installation Overview
The XTP R HWP 201 4K can be installed into the provided mud ring or an optional UL
Listed metal electrical junction box.
ATTENTION:
• Do not mount multiple devices adjacent to each other in the same metal junction
box. Add at least a one gang space between devices.
• Ne procédez pas à une installation juxtaposée des appareils dans le même boîtier
de dérivation métallique. Veuillez laisser un espace d’un gang minimum entre
chaque appareil.
1. Prepare the mounting surface.
CAUTION: Risk of personal injury. Failure to check the items listed below may
result in personal injury.
ATTENTION : Risque de blessure. La non-vérification des éléments listés
ci-dessous peut provoquer des blessures.
ATTENTION:
• Failure to check the items listed below may result in property damage.
• La non-vérification des éléments listés ci-dessous peut provoquer des
dommages matériels.
• Ensure there are no utility cables or pipes at the intended location that might be
damaged or cause injury when installing the device.
• Check that the installation meets building, electrical, and safety codes.
• Ensure there is sufficient space behind the device.
• Choose a location that will allow cable runs without interference.
NOTES:
• Cables may need to be installed in the wall or conduits before installation.
• The mud ring does not require attachment to wall studs.
XTP R HWP 201 4K Wallplate Receiver • Installation 5
2. Cut a hole in the mounting surface (see Mounting Surface Preparation below).
3. Install the mud ring or metal junction box in the mounting surface (see Mud Ring
Installation on the next page or UL Listed Metal Junction Box Installation on
page 7).
4. Route and connect cables to the rear and side panel connectors (see Rear and Side
Panel Connectors on page 8).
5. Mount the XTP R HWP 201 4K to the mud ring or metal junction box (see Mounting
the XTP R HWP 201 4K on page 9).
6. Connect inputs to the front panel connectors (see Front Panel Connectors on
page 10).
7. Supply power to all connected devices.
Metal Junction Box or Mud Ring Installation
Mounting Surface Preparation
1. Using an appropriate template or the mounting enclosure as a guide, mark the area
of the wall that will be cut with a soft pencil (for the provided mud ring, see Mounting
Template on page 32).
NOTES:
• If using a junction box, use a UL Listed metal one only.
• Check with the manufacturer of the metal junction box for specific installation
requirements.
• Install junction boxes against wall studs.
2. Use a jigsaw or small hand saw to carefully cut away the material within the guidelines
drawn in step 1.
NOTE: If using a template or the mud ring as a guide for cutting the hole in drywall,
cut inside the guidelines to maximize the contact between the mud ring and
drywall.
3. If using a mud ring in a wall with insulation inside, remove at least 6 inches of the
insulation in all directions around the cutout.
NOTE: If a wall stud interferes with removing 6 inches of insulation around the
cutout, remove the insulation between the cutout and wall stud.
4. Check the size of the opening by laying the mud ring or metal junction box against it.
The mounting device should fit snugly in the opening.
5. If needed, use a saw, file, or sandpaper to enlarge the hole.
CAUTION: Risk of personal injury. Smooth the edges of the opening to avoid
personal injury during installation.
ATTENTION : Risque de blessure. Lissez les bords de l’ouverture afin d’éviter
toute blessure lors de l’installation.
ATTENTION:
• Smooth the edges of the opening to avoid damage to the mounting device or
the cables.
• Lissez les bords de l’ouverture afin d’éviter d’endommager l’appareil de
montage ou les câbles.
XTP R HWP 201 4K Wallplate Receiver • Installation 6
Mud Ring Installation
Backing Clip
Mounting Sc
rew
Rotate the backing clip
out of the way to insert
the mud ring into the wall.
Figure 2. Installing the Mud Ring with Backing Clips
1. Place 1.25 inches (3.18 cm) long or 0.75 inch (1.90 cm) #6-32 thread machine screws
through the large holes in the two corners of the mounting bracket. Use the shortest
possible screw needed.
2. Loosely fasten the mounting backing clip on the end of each screw.
3. Insert the mounting bracket into the opening in the wall (see Mounting Surface
Preparation on the previous page).
4. Rotate each backing clip so that the tab is behind the installation surface to hold the
bracket snuggly in place when the screw is tightened.
NOTE: The backing clip can be installed as shown in Layout A or Layout B (see
figure 3).
Layout A
0.75" #6-32 Scr
ew
Backing Clip
Backing Clip
Mounting Surface
Mounting Surface
Layout
B
1.25" #6-32 Screw
Figure 3. Backing Clip Installation
5. Use a cross-head (Phillips) screwdriver to fasten the screws and backing clips in place.
XTP R HWP 201 4K Wallplate Receiver • Installation 7
UL Listed Metal Junction Box Installation
Metal junction boxes may differ slightly from model to model.
NOTES:
• If using a junction box, use a metal one only.
• Check with the manufacturer of the metal junction box for specific installation
requirements.
Signal Input
Cable
Cable
Clamp
Screws or
Nails
Wa
ll opening is
flush with edge
of box
.
Wall Stud
Figure 4. Installing a Metal Junction Box
1. Insert the metal junction box into the hole in the wall (see Mounting Surface
Preparation on page 5).
2. Secure the box to the stud using two screws or nails, as appropriate. The front edge of
the metal junction box must be flush with the front surface of the wall.
3. Feed cables through a knockout opening in the metal junction box.
4. Secure cables with clamps or ties to provide strain relief.
5. Trim back and insulate shields with heat shrink.
ATTENTION:
• To prevent short circuits, the outer foil shield can be cut back to the point
where the cable exits the cable clamp. Both braided and foil shields should be
connected to an equipment ground at the other end of the cable.
• Afin d’éviter les court circuits, le blindage en aluminium extérieur peut être
réduit jusqu’à ce que le câble sorte de la cosse de câble. Le blindage tressé et
le blindage en aluminium devraient être connectés à la masse d’un équipement
à l’autre bout du câble.
XTP R HWP 201 4K Wallplate Receiver • Installation 8
Rear and Side Panel Connectors
XTP R HWP 201 4K
12V
0.7A MAX.
POWER
XTP IN
PWR
SIG
AUDIO
AA
B
Rear
Side
Figure 5. Rear Panel Connectors
A
XTP Input connector — Connect a twisted pair cable to the RJ-45 connector labeled
“XTP IN” on the XTP R HWP 201 4K and the XTP output port on another XTP device
to pass all signals (see TP Cable Termination and Recommendations on page 12).
This cable carries the following signals:
• Digital video
• Digital audio
• Bidirectional RS-232 and IR commands
• Remote power
• Ethernet communication
• System communication
Signal LED indicator — Lights green when the receiver is receiving an
active XTP input signal.
Link LED indicator — Lights yellow when XTP devices are connected
and communication is established.
ATTENTION:
• Do not connect this connector to a computer data or telecommunications
network.
• Ne connectez pas ce connecteur à un réseau de données informatiques ou à
un réseau de télécommunications.
• XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see Remote power on
page 16).
• XTP à distance est destiné à une utilisation en intérieur seulement. Aucune
partie du réseau qui utilise l’alimentation XTP à distance ne peut être routée en
extérieur (voir Remote power à la page 16).
B
Power connector — Connect an external power supply to the 2-pole direct insertion
captive screw connector. Confirm the polarity of the power supply wires. For wiring
considerations, see Power Connection on page 14.
NOTE: The XTP R HWP 201 4K can also be powered remotely (see Remote
power on page 16).
Signa
l
Link
XTP R HWP 201 4K Wallplate Receiver • Installation 9
Mounting the XTP R HWP 201 4K
NOTE: Some connectors and features are inaccessible after the device is mounted or
the faceplate is attached.
XTP R HWP 201 4K
Decorator-Style Faceplate
e
1
2
3
Figure 6. Installing the XTP R HWP 201 4K in the Provided Mud Ring
XTP R HWP 201 4K
Signal Output
Cable
Cable
Clamp
Wall Stud
e
11
2
2
3
3
Decorator-Style Faceplate
Figure 7. Installing the XTP R HWP 201 4K in a Metal Junction Box
1. Align the mounting screws on the XTP R HWP 201 4K with the available holes on the
mud ring (see figure 6,
1
) or metal junction box (see figure 7,
1
).
2. Using the provided screws, attach the XTP R HWP 201 4K to the mud ring (see
figure 6,
2
) or metal junction box (see figure 7,
2
).
3. Use four mounting screws to attach the decorator-style faceplate to the
XTP R HWP 201 4K (see figure 6 or 7,
3
).
XTP R HWP 201 4K Wallplate Receiver • Installation 10
Front Panel Connectors
HDMI OUT
LAN
CONFIG
HDMI
AUDIO
ON
OFF
RESET
AUDIO
Tx
LR
IRRS-232
Rx Tx RxG
OVER XTP
A
A
B
C
D
Top
Front
E
A
HDMI output connector (see page 10)
B
Analog audio output connector
(see page 10)
C
RS-232 and IR Over XTP connector
(see page 11)
D
LAN connector (see page 11)
E
Configuration port (see page 11)
Figure 8. Front Panel Connectors
A
HDMI output connector — Connect a digital video display to the female HDMI
connector. It accepts HDMI, DVI (with an appropriate adapter), or dual mode
DisplayPort video connections.
NOTES:
• The maximum HDMI cable length is 15 feet (4.6 meters).
• Use a tie wrap and the front panel lance punch to secure the HDMI connector
to the device (see HDMI Connection on the next page).
B
Analog audio output connector — Connect a balanced or unbalanced, stereo or
mono audio output device to the 3.5 mm, 5-pole captive screw connector for 2-channel
stereo analog audio output (see figure 9 for wiring details).
Do not tin the wires!
Balanced Audio Output
Tip
Ring
Tip
Ring
Slee
ves
Unbalanced Audio Output
Tip
No Ground Here
No Ground Here
Tip
Sleeves
LR
LR
Figure 9. Audio Output Wiring
XTP R HWP 201 4K Wallplate Receiver • Installation 11
C
RS-232 Over XTP port — To pass bidirectional serial or other control
signals between XTP-compatible devices, connect a control device to the
5-pole captive screw connector (see figure 8,
C
on the previous page). The
port includes only the three poles labeled “RS-232.”
IR Over XTP port — To transmit and receive IR signals (up to 56 kHz),
connect a control device to the 5-pole captive screw connector (see
figure 8,
C
on the previous page). This port includes the two poles labeled
“IR” and shares the ground pole with the RS-232 port.
NOTE: RS-232 and IR data can be transmitted simultaneously (see
RS-232 and IR Over XTP Communication on page 14 for wiring details).
D
LAN connector — Connect a control device or device to be controlled to this
LAN connector (see figure 8,
D
on the previous page) for 10/100Base-T Ethernet
communication through this pass-through port. LEDs on this connector indicate link
and activity status.
E
Configuration port — If desired, connect a host device to the front panel USB mini-B
Config port (see figure 8,
E
on the previous page) for configuring the receiver.
Connection Details
HDMI Connection
To secure the HDMI cable to the HDMI output connector,
use a tie wrap and the front panel lance punch.
1. Route the tie clip through the front panel lance punch
(see
1
in the image to the right).
2. Plug the HDMI cable into the panel connection (
2
).
3. Loosely place the included tie wrap around the HDMI
connector (
3
).
4. Use pliers or similar tools to tighten the tie wrap, then
remove any excess length (
4
).
ATTENTION:
• Connect and pull the tie wraps until they are
secure. Do not overtighten.
• Connectez et tirez les serre-câbles jusqu’à ce
qu’ils soient sécurisés. Ne pas trop serrer.
IR
Tx Rx G Tx Rx
RS-232
PWR
SIG
L
R
AUDIO
RS-232 IR
OVER XTP
Tx Rx Tx RxG
LAN
HDMI OUT
AUDIO
PWR
SIG
L
R
AUDIO
RS-232 IR
OVER XTP
Tx Rx Tx RxG
LAN
HDMI OUT
AUDIO
11
2
2
3
3
44
XTP R HWP 201 4K Wallplate Receiver • Installation 12
TP Cable Termination and Recommendations
Use the following pin configurations for twisted pair cables.
12345678
RJ-45
Connector
Inser
t Twisted
Pair Wires
Pins:
Pin
1
2
3
4
5
6
7
8
Wire color
White-green
Green
White-orange
Blue
White-blue
Orange
White-brown
Brown
Wire color
T568A T568B
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
TIA/EIA-T568B
Pin Wire Color
1 White-orange
2 Orange
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
Figure 10. TP Cable Termination
Supported cables
The XTP R HWP 201 4K is compatible with shielded twisted pair (F/UTP, SF/UTP, and S/
FTP) and unshielded twisted pair (U/UTP) cable.
ATTENTION:
• Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201
cable to link the XTP products.
• N’utilisez pas le câble AV Skew-FreeUTP version améliorée UTP23SF d’Extron ou
le câble STP201 pour relier les produits XTP.
• To ensure FCC Class A and CE compliance, STP cables and STP connectors are
required.
• Afin de s’assurer de la compatibilité entre FCC ClasseA et CE, les câbles STP et
les connecteurs STP sont nécessaires.
XTP R HWP 201 4K Wallplate Receiver • Installation 13
Cable recommendations
Extron recommends using the following practices for XTP communication to achieve full
transmission distances up to 330 feet (100 meters) and reduce transmission errors.
• Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best
performance:
• XTP DTP 24/1000 Non-Plenum 1000' (305 m) spool 22-236-03
• XTP DTP 24P/1000 Plenum 1000' (305 m) spool 22-235-03
• XTP DTP 24 Plug Package of 10 101-005-02
• If not using XTP DTP 24 cable, at a minimum, Extron recommends 24 AWG, solid
conductor, STP cable with a minimum bandwidth of 400 MHz.
• Terminate cables with shielded connectors to the TIA/EIA-T568B standard (see
figure 10 on the previous page).
• Limit the use of more than two pass-through points, which may include patch points,
punch down connectors, couplers, and power injectors. If these pass-through points
are required, use shielded couplers and punch down connectors.
NOTE: When using STP cable in bundles or conduits, consider the following:
• Do not exceed 40% fill capacity in conduits.
• Do not comb the cable for the first 20 meters, where cables are straightened,
aligned, and secured in tight bundles.
• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.
• Separate twisted pair cables from AC power cables.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

Extron XTP R HWP 201 User manual

Extron
Brand
Extron
Model
XTP R HWP 201
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents