Vitek VT-TJB04 User manual

Template

Make sure to mount with the “TOP”

Poinng upwards.

Junction Box Mount

PA4*22 screws

Green rubber plugs

Template

Installation guide

Hex wrench

VT-TJB04 INSTALLATION GUIDE

1) Attach the Junction Box Mount base to installation

Location with the included screws and with the

assistance of the template.

www.vitekcctv.com

2) Attach the camera to the Junction Box Mount.

4) The inside of the

junction box can

be used for Cable

Management.

3) Feed cables through mount in one of the three ways

shown below.

Option 1 Option 2 Option 3Option 1

5) Complete Installation

by tightening the set

screw on the side of

the junction box.