Dale Tiffany STA11200 Installation guide

ASSEMBLY INSTRUCTIONS:

Item No: STA11200

This lamp comes assembled.

Follow the instructions to insert the bulb.

1. Place the lamp base on a level surface.

2. Unscrew the shade (C) from the base (A).

3. Insert bulb into socket (B).

4. Screw the shade (C) back onto the base. (A).

To loosen the shade – turn to the left.

To tighten the shade – turn to the right.

Uses (1) Maximum 15WATT Type “B” Bulb

(Bulb not included)

Cleaning of your lamp

Unplug lamp, wipe with damp cloth.

Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision 10/25/11

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Page is loading ...