Socket assembly
Cord
Base
Threaded Rod
Knurl Nut
Tiffany Shade
Bulb
Finial
ASSEMBLY INSTRUCTIONS:
Model # TT100361
No Tools Required
Estimated Assembly Time 5-10 Minutes
1) Place the lamp on a level surface.
2) Screw Threaded Rod into the Socket assembly.
3) Screw Knurl Nut on Threaded Rod. This can be used
to raise the Shade a little if necessary.
4) Place the Shade over the end of the Threaded Rod
and screw the Finial securing the shade in place.
5) Insert bulb into the bulb socket.
Recommended (2) 60-watt type ‘A” Bulbs.
(Bulbs not included)
Cleaning of Your Lamp.
Unplug lamp, wipe with damp cloth cleaner.
Do not use Abrasives.
*Save these instructions for future reference.
*Made in China Revision– 03/05/13
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Page is loading ...
/
