Dale Tiffany TR10021 Installation guide

ASSEMBLY INSTRUCTIONS:

Item No: TR10021

1. Place the base (A) on a level surface.

2. Screw lower column (B) onto base (A).

3. Screw center column (C) onto lower column (B).

4. Screw upper column (D) onto center column (C).

5. Screw socket assembly (E) onto upper column (D).

6. Place shade (H) over socket (F) and tighten socket ring (G),

securing shade in place.

To connect the Reading Light

1. Remove the shade nut (K) from the socket (I).

2. Place the shade (J) over the socket assembly (I) and replace

the shade nut (K) to tighten the shade.

3. Insert bulb into the socket.

Recommended (1) maximum 100 WATT, Type “A” Bulb

Or (1) maximum 23Watt CFL Bulb

Uses (1) maximum 40Watt, Type “B” Bulb

Or (1) maximum 13Watt, CFL Bulb

(Bulbs not included)

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth.

Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision – 06/28/12

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL

PACKAGING TO MINIMIZE DAMAGE.

Page is loading ...