2. Dale Tiffany
  3. TC11173

Dale Tiffany TC11173 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Dale Tiffany TC11173 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ASSEMBLY INSTRUCTIONS:
Item No: TC11173
1. Place the base (A) on a level surface.
2. Insert the harp (E) until it sits firmly into the saddle (D).
3. Adjust the knurl nut (F) on harp (E).
This can be used to raise the shade a little if necessary.
4. Place the shade (G) over the end of the harp (E) and
tighten the finial (H) securing the shade in place.
5. Insert the bulb into the bulb socket.
Recommended (1) maximum 75 WATT Type “A” Bulb
Or (1) maximum 18WATT CFL Bulb
(Bulb not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 04/16/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL
PACKAGING TO MINIMIZE DAMAGE.
ASSEMBLY INSTRUCTIONS:
Item No: TC11173
1. Place the base (A) on a level surface.
2. Screw lower column (B) onto base (A).
3. Screw column (C) onto lower column (B).
4. Screw column (D) onto column (C).
5. Screw upper column (E) onto column (D).
6. Screw socket assembly (F) onto upper column (E).
7. Place shade (G) over socket assembly (F) and tighten
socket ring (H), securing shade in place.
Recommended (1) maximum 150 WATT, 3-Way, Type “A” Bulb
Or maximum (1) 25Watt CFL Bulb
(Bulb not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 04/16/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL
PACKAGING TO MINIMIZE DAMAGE.
INSTRUCIONES DE ASAMBLEA:
Modelo: TC11173
1. Ponga la base (A) en una superficie llana.
2. Atornille la columna inferior (B) en la base (A).
3. Atornille la columna (C) en la columna inferior (B).
4. Atornille la columna (D) en la column (C).
5. Atornille la columna superior (E) en la columna (D).
6. Atornille la asamblea de la portalámpara (F) en la columna
superior (E).
7. Coloque la pantalla (G) sobre la asamblea de la portalámpara (F)
y atornille el anillo de enchufe (H) asegurando la pantalla en su
lugar.
Usar máximo (1) 150 vatios, de 3 vias tipo “A” Bulbo
O máximo (1) bombilla de CFL de 25 vatios
(Bulbo no incluido)
Limpieza de lampara
Desenchufe la lámpara, limpiar con un trapo húmedo.
No utilice los abrasivos.
*Guardar estas instructiones para una referencia futura.
Hecho en China Revision – 04/16/12
PARA RAZONES DE REGRASAR: POR
FAVOR CONSERVE EL IMPAQUETADO
ORIGINAL PARA REDUCIR DAÑOS MINIMO.
/