Dale Tiffany TT10823 Installation guide

ASSEMBLY INSTRUCTIONS:

Model # TT10823

No Tools Required

Estimated Assembly Time 5-10 Minutes

1. Place the Base on a level surface

2. Insert the harp until it sits firmly into the saddle

3. Adjust the knurl nut on harp.

This can be used to raise the shade a little if necessary.

4. Place the shade over the end of the harp and tighten

the finial securing the shade in place.

5. Insert the bulb into the bulb socket

Recommended (1) maximum 100 Watt Type A Bulb.

Or (1) 23-watt standard base CFL bulb (Bulb not included)

Cleaning of Your Lamp.

Unplug lamp, wipe with damp cloth cleaner.

Do not use Abrasives.

*Save these instructions for future reference.

*Made in China Revision –03/05/13

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Page is loading ...