Premio CT-XCL01 User manual

USER’S

MANUAL

CT-XCL01 Series

Mini-ITX Industrial

Motherboard

CT-XCL01 l User’s Manual

Table of Contents

Prefaces …………………………………………………….……………………………………………. 04

Revision …………………………………………………………………………………………..……………….……….. 04

Disclaimer ………………………………………………………..…….…….………………………….……………….. 04

Copyright Notice …………………………………….…………………….…………………………………………… 04

Trademarks Acknowledgment …………..………………………………………………………...................04

Environmental Protection Announcement …………………………….………………….……………….. 04

Safety Precautions ………………………………………….……………………………….…………….………….. 05

Technical Support and Assistance …………………………………….…………….…………….…………….06

Conventions Used in this Manual ………………………………………………………………….….………..06

Package Contents …………………………………………………………………………………………….…………07

Ordering Information …………………………………….……………………………………….……….………… 07

Chapter 1 Product Introductions ………………………………………………………..… 08

1.1 Overview ……………………….………………………………..………….………………..……….. 09

1.1.1 Key Feature ………….……………………………………….……….…..………..…....... 09

1.2 Hardware Specification ….………………………….....…………….…………..…..………… 10

1.3 Block Diagram ………………………..……………………..…………………………………..…… 11

1.4 Board Dimensions …………………………..…………………………..………..……….………. 12

Chapter 2 Jumper and Connectors ……..…………………..………………………..…. 13

2.1 Switch and Connector Locations ……………………………………..…….…..……..….... 14

2.1.1 Top View ……………………………………………………………………....……………… 14

2.1.2 Bottom View ……………………………………………………………………....……….. 15

2.1.3 Back Panel View …………………………………………………………………………….. 15

2.2 Connector Definition …………………………………………….……….…….………............ 16

2.3 Jumpers Definition ………….……………............................................................. 29

Chapter 3 Features & Interface …………..………………………………………..……… 31

3.1 General Purpose Input & Output (GPIO) ……………………………………………….... 32

3.1.1 GPIO Configuration ………………………………………………………………………... 32

3.2 Watchdog Timer ……………………………….…………………………………..………………... 33

3.2.1 Board Design ……………………………………………………………………….………… 33

3.2.2 Psuedo Code ……………………………………………………………………….……….. 34

Chapter 4 BIOS Setup …………..……………………………………………….……..……… 36

4.1 BIOS Introduction ………………………………………..…….…………………………..…….... 37

4.2 Main Setup ………………………………………..…….…………….…………………………….... 38

4.2.1 System Date …….……………………………………………..……..………….……….... 38

4.2.2 System Time ………..…………………………………………..……….………..………... 38

4.3 Advanced Setup ………………………………………………………..…………………..……….. 39

4.3.1 Trusted Computing ……………….…………..…….………..…..……………..……... 40

4.3.2 ACPI Settings ……………….………..…………………………….………………..……... 41

4.3.3 AMT Configuration ………………….….………..………………..……………..……... 42

4.3.4 PCH FW Configuration ……………….………..………………..……………..……... 42

4.3.5 Super IO Configuration ……………….………..………………..……………..……... 43

4.3.6 Hardware Monitor ……………….………..………………………….……..…..……... 46

4.3.7 Serial Port Console Redirection ……………….………..……………..…..……... 47

4.3.8 CPU Configuration ……………….………..……….…………..………..……..……... 47

4.3.9 Intel TXT Information ……………………….…….……..…..…………………..……... 49

4.3.10 SATA Configuration …………….………..………………………..…………..……... 50

2

CT-XCL01 l User’s Manual

4.3.11 Network Stack Configuration ……………………………….……………..……...51

4.3.12 Compatibility Support Module Configuration .……………….……..……... 52

4.3.13 NVMe Configuration …………………………………………………………….……... 53

4.3.14 USB Configuration ………………………….……………………………….…………... 54

4.4 Chipset …………...……….………………….…..….…..…………..…………………………..….... 55

4.4.1 System Agent Configuration ………………….…………..……………..………….. 55

4.4.2 PCH-IO Configuration ………….…………………………………..…………………….. 59

4.5 Security …………...……….………………….…..….…..………………………..……..…………... 62

4.5.1 Administrator Password …….…………………………………..….………………….. 62

4.5.2 User Password …….……………………………….………………..….………………….. 62

4.6 Boot …………...……….….………………….…..…………………………..………....……………... 63

4.6.1 Setup Prompt Timeout ………………………..…………..……………………………..63

4.6.2 Bootup NumLock State ………………………………………………..………………… 63

4.6.3 Quiet Boot ………………………….……………………….…………………..…...………. 63

4.6.4 Boot mode select [UEFI] …………………………..…………………………………... 63

4.6.5 Boot Option Priorities …………………………..……………………….………….…... 63

4.6.6 UEFI USB Key Drive BBS Priorities ……………………………..…..………….…... 63

4.7 Save & Exit …………...……….….………………………………………..…………..……………... 64

4.7.1 Save Changes and Reset …………………..…………..……………………………….. 64

4.7.2 Discard Changes and Reset ……………………………………..……..……………… 64

4.7.3 Save Changes and Reset …………………………….………………..…..…...………. 64

4.7.4 Restore Defaults …………………………………………..……………..………………... 64

4.7.5 Launch EFI Shell from Filesystem Device ……………………..………………... 64

3

CT-XCL01 l User’s Manual

4

Revision

Disclaimer

All specifications and information in this User’s Manual are believed to be accurate and up to date. Premio

Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The

information in this document is subject to change without notice and does not represent a commitment on

the part of Premio Inc.

Premio Inc. disclaims all warranties, express or implied, including, without limitation, those of

merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must

take full responsibility for the application of the product.

Copyright Notice

electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,

Trademarks Acknowledgment

Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.

Windows® is registered trademark of Microsoft Corporation.

AMI is trademark of American Megatrend Inc.

IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation

All other products and trademarks mentioned in this manual are trademarks of their respective owners.

Environmental Protection Announcement

Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution

and ensure environment protection.

Prefaces

Revision

Description

Date

1.0

Manual Released

2023/07/14

Preface

CT-XCL01 l User’s Manual

5

Safety Precautions

Before installing and using the equipment, please read the following precautions:

⚫Put this equipment on a reliable surface during installation. Dropping it or letting it fall could

cause damage.

⚫The power outlet shall be installed near the equipment and shall be easily accessible.

⚫Turn off the system power and disconnect the power cord from its source before making any

installation. Be sure both the system and the external devices are turned OFF. Sudden surge

⚫of power could ruin sensitive components. Make sure the equipment is properly grounded.

⚫When the power is connected, never open the equipment. The equipment should be opened

only by qualified service personnel.

⚫Make sure the voltage of the power source is correct before connecting the equipment to the

power outlet.

⚫Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use

liquid or spray detergents for cleaning.

⚫Avoid the dusty, humidity and temperature extremes.

⚫Do not place heavy objects on the equipment.

⚫If the equipment is not used for long time, disconnect it from the power to avoid being

damaged by transient over-voltage.

⚫The storage temperature shall be above -40°C and below 80°C.

⚫The computer is provided with a battery-powered real-time clock circuit. There is a danger of

explosion if incorrectly replaced. Replace only with the same or equivalent type

recommended by the manufacturer.

⚫If one of the following situation arises, get the equipment checked be service personnel:

•The power cord or plug is damaged.

•Liquid has penetrated into the equipment.

•The equipment has been exposed to moisture.

•The equipment does not work well or it cannot work according the user’s manual.

•The equipment has been dropped and damaged.

•The equipment has obvious signs of breakage.

Preface

CT-XCL01 l User’s Manual

6

Technical Support and Assistance

1. Visit the Premio Inc website at www.premioinc.com where you can find the latest information about

the product.

2. Contact your distributor, our technical support team or sales representative for technical support if

you need additional assistance. Please have following information ready before you call:

⚫Model name and serial number

⚫Description of your peripheral attachments

⚫Description of your software (operating system, version, application software, etc.)

⚫A complete description of the problem

⚫The exact wording of any error messages

Conventions Used in this Manual

Preface

This indication alerts operators to an operation that, if not strictly observed,

may result in severe injury.

WARNING

This indication alerts operators to an operation that, if not strictly observed,

may result in safety hazards to personnel or damage to equipment.

CAUTION

This indication provides additional information to complete a task easily.

NOTE

CT-XCL01 l User’s Manual

7

Package Contents

Before installation, please ensure all the items listed in the following table are included in the package.

Item

Description

Qty

1

CT

-XCL01 Mini-ITX Industrial Motherboard 1

2

I/O shield

1

3

SATA Cable

1

Preface

Ordering Information

Model No. Product Description

CT-XCL01 Mini-ITX Industrial Motherboard with LGA 1151 Socket supporting

8th/9th Gen Intel® Core™i3/i5/i7 Processor, Q370

Chapter 1

Product Introductions

CT-XCL01 l User’s Manual

9

1.1 Overview

CT-XCL01 is a mini-ITX industrial motherboard with LGA1151 socket to support Intel 8th/9th

Generation Core i7/i5/i3, and Pentium Processor. Two DDR4 SODIMM memory sockets enables a

maximum of 32GB. The integrated Intel® UHD Graphics 610/630 with the processor supports three

independent displays from the DVI, DisplayPort, HDMI, or LVDS onboard.

The I/O interface of the board gives the users rich connectivity. It supports 2x Gigabit Ethernet, USB3.0

with optional 1x Type-C port, COM, GPIO, SATA, mSATA, and M.2 for various applications. The mini PCIe

and PCIex16 slots also enables flexibility and expandability.

Chapter 1: Product Introductions

1.1.1 Key Features

⚫Intel® 8th/9th Gen. Core™i7 / i5/ i3 Processor (LGA1151) with Q370 PCH

⚫2x DDR4 SO-DIMM support up to 32GB

⚫2x Realtek RTL8111G GbE LAN

⚫Triple displays from DVI / DisplayPort / HDMI / LVDS

⚫1x PCIe x16, 1x Mini PCIe

⚫1x SATA (shared by 1x M.2) and 4x SATA 3.0Gb/s

⚫Up to 5x COM port, 6x USB 3.0, 2x USB 2.0

⚫1x 8-bit GPIO (4-in / 4-out)

⚫Optional 1x USB 3.1 Type-C

⚫Optional TPM 2.0

CT-XCL01 l User’s Manual

10

1.2 Hardware Specification

Chapter 1: Product Introductions

System

•Processor: LGA 1151 socket supporting 8th/9th Gen

Intel® Core™i3/i5/i7 Desktop Processor

- Intel® Core™i7-9700E, i7-9700TE, i7-8700T, i7-8700

- Intel® Core™i5-9500E, i5-9500TE, i5-8500T, i5-8500

- Intel® Core™i3-9100E, i3-9100TE, i3-8100T, i3-8100

- Intel® Pentium® G5400T, G5400 System Chipset:

Intel® Q370 PCH

•LAN Chipset: 2x Realtek RTL8111G GbE LAN

(Support Wake-on-LAN and PXE)

•Audio Codec: Realtek ALC888S

•Memory: 2x 260-Pin DDR4 2133/2400/2666MHz

SODIMM Max. Size: 32GB

•BIOS: AMI 256Mbit SPI BIOS

•Watchdog:

- Software Programmable Supports 1~255 sec.

System Reset

•TPM: TPM 2.0 supported (optional)

Display

•Graphics: Intel® UHD Graphics 610/630

•1x DVI-D, 1x LVDS,

1x DisplayPort 1.2, 1x HDMI 1.4

•Multiple Display: Triple Display

Storage

•SATA: 4 x SATA 3.0Gb/s, Support RAID 0, 1, 5, 10

•M.2: 1x M.2 (M-Key, Type: 2280, SATA)

Expansion

•Mini PCI Express: 1x Full-size Mini PCIe

•PCI Express: 1x PCIe x16 (Gen3)

Rear I/O

•Display: 1x DVI-D, 1x DisplayPort, 1x HDMI

•COM: 1x RS-232/422/485

•USB: 4x USB 3.2 Gen 1

•LAN: 2x RJ45

•Audio: 1x Line-out, 1x Mic-in

•1x Optional USB 3.2 Gen 1 Type-C

Internal I/O

•Display: 1x 2-ch 24-bit LVDS

•COM: 4x RS-232

•USB: 2x USB 3.2 Gen 1, 2x USB 2.0

•SATA: 4 x SATA 3.0Gb/s

•Audio: 1x Front panel audio

•GPIO: 1x 8-bit GPIO (4-in/4-out)

•Others:

- 1x LPC

- 1x Front panel

- 1x SPI

- 2x PWM fan

Operating System

•Windows: Windows 10

•Linux: Linux kernel 5.X

Power

•Power Connector: 2x12-pin and 2x2-pin power

connector

•Power Input: ATX power

•Management: ACPI

Mechanical & Environment

•Form Factor: Mini-ITX

•Dimension: 170mm x 170mm

•Operating Temp.: 0°C ~ 60°C

•Storage Temp.: -40°C ~ 90°C

•Relative humidity: 10% ~ 90% relative humidity, non-

condensing

CT-XCL01 l User’s Manual

11

1.3 Block Diagram

Chapter 1: Product Introductions

CT-XCL01 l User’s Manual

12

1.4 Board Dimensions

Unit: mm

Chapter 1: Product Introductions

170mm

Chapter 2

Jumper and Connectors

CT-XCL01 l User’s Manual

14

2.1 Switch & Connector Locations

2.1.1 Top View

Chapter 2: Jumper & Connectors

SODIMM_B1 SODIMM_A1

PCIEX16_1

AUDIO1

COM1

DVI1HDMI1_DP1

LAN2_USB34

LAN1_USB12USB9

TJ1

USB56

COM5

COM4

COM3

COM2

SYS_FAN1

ATX12V1

SATA2

SATA4

SATA3

SATA1

LVU1

SU1 EATXPWR1

CPU_FAN1

TPM-U1

JDI01

JLPC1

AU1

F_PANEL1

FP_AUDI01

JBKL1

MINI_CARD1

MINI_CARD1_1

SPI1

USB78

CN2

JLVDS1

JCASE1

CT-XCL01 l User’s Manual

15

2.1.2 Bottom View

2.1.3 Back Panel View

Chapter 2: Jumper & Connectors

USB Type-C

2x RJ45 LAN

4x USB 3.2 Gen 1

DisplayPort 1.2

COM

DVI-D

Audio

HDMI

M2_1

SPK1

CT-XCL01 l User’s Manual

16

2.2 Connectors Definition

List of Connectors

Connectors Location Definition

HDMI1_DP1

HDMI and

DisplayPort Ports

DVI

-D1

DVI

-D Connector

COM1

Serial Port

LAN1_USB12

LAN1 and USB3.0 Ports

LAN2_USB34

LAN2 and USB3.0 Ports

AUDIO1

Line

-out and Microphone in

PCIEX

16_1

PCI

-Express X16 Slot

JLVDS1

LVDS Connector

JBKL1

Panel Power Connector

USB

78

Front Panel USB2.0 Header

SATA

1, SATA2, SATA3, SATA4

SATA Connector

COM2, COM3, COM4, COM5

Serial Port Connector

FP_AUDIO1

Front Panel Audio Header

CPU_FAN

1, SYS_FAN1

FAN Connector

F_PANEL

1

Front Panel Header

EATXPWR

1

Main Power Supply Connector

ATX12V1

Processor Power Supply Connector

JLPC1

Debug Header

SPI1

SPI Header

JDIO

1

GPIO Connector

TPM

1

TPM Header

MINI_CARD

1_1

Mini PCI

-Express

NGFF

1

M.2 Socket

USB

56

USB3.0 Connector

Chapter 2: Jumper & Connectors

CT-XCL01 l User’s Manual

17

HDMI1_DP1: HDMI and DisplayPort Ports

Pin Definition Pin Definition

1 DP_DP0 21 HDMI_DP2

2 GND 22 GND

3 DP_DN0 23 HDMI_DN2

4 DP_DP1 24 HDMI_DP1

5 GND 25 GND

6 DP_DN1 26 HDMI_DN1

7 DP_DP2 27 HDMI_DP0

8 GND 28 GND

9 DP_DN2 29 HDMI_DN0

10 DP_DP3 30 HDMI_CKP

11 GND 31 GND

12 DP_DN3 32 HDMI_CKN

13 DP / HDMI Singnal

Switch 33 NC

14 GND 34 NC

15 DP_AUXP 35 HDMI_DDC_CLK

16 GND 36 HDMI_DDC_DATA

17 DP_AUXN 37 GND

18 DP_Hot Plug 38 HDMI_PWR

19 GND 39 HDMI_Hot Plug

20 DP_PWR

Chapter 2: Jumper & Connectors

CT-XCL01 l User’s Manual

18

DVI-D1: DVI-D Connector

Pin Definition Pin Definition

1 DVI_TX2- 16 DVI Hot Plug

2 DVI_TX2+ 17 DVI_TX0-

3 GND 18 DVI_TX0+

4NC 19 GND

5NC 20 NC

6 DVI_DDC_CLOCK 21 NC

7 DVI_DDC_DATA 22 GND

8NC 23 DVI_CLK+

9 DVI_TX1- 24 DVI_CLK-

10 DVI_TX1+ C1 NC

11 GND C2 NC

12 NC C3 NC

13 NC C4 NC

14 +5V C5 GND

15 GND

COM1: Serial Port

Connector Type: 9-pin D-Sub

Pin Definition

1 DCD1

2 RXD1

3 TXD1

4 DTR1

5 GND

6 DSR1

7 RTS1

8 CTS1

9 RI1

10 KEY (No Pin)

Chapter 2: Jumper & Connectors

*Serial Port is over-current protected

CT-XCL01 l User’s Manual

19

LAN2_USB34: LAN2 and USB3.0 Ports

Connector Type: RJ45 port with LEDs and dual USB3.0 ports

Pin Definition Pin Definition Pin Definition

1 +5V 10 +5V 20 LAN2_MDI0P

2 USB2_D3- 11 USB2_D4- 21 LAN2_MDI0N

3 USB2_D3+ 12 USB2_D4+ 22 LAN2_MDI1P

4 GND 13 GND 23 LAN2_MDI2P

5 USB3_RX3- 14 USB3_RX4- 24 LAN2_MDI2N

6 USB3_RX3+ 15 USB3_RX4+ 25 LAN2_MDI1N

7 GND 16 GND 26 LAN2_MDI3P

8 USB3_TX3- 17 USB3_TX4- 27 LAN2_MDI3N

9 USB3_TX3+ 18 USB3_TX4+

LAN1_USB12: LAN1 and USB3.0 Ports

Connector Type: RJ45 port with LEDs and dual USB3.0 ports

Pin Definition Pin Definition Pin Definition

1 +5V 10 +5V 20 LAN1_MDI0P

2 USB2_D1- 11 USB2_D2- 21 LAN1_MDI0N

3 USB2_D1+ 12 USB2_D2+ 22 LAN1_MDI1P

4 GND 13 GND 23 LAN1_MDI2P

5 USB3_RX1- 14 USB3_RX2- 24 LAN1_MDI2N

6 USB3_RX1+ 15 USB3_RX2+ 25 LAN1_MDI1N

7 GND 16 GND 26 LAN1_MDI3P

8 USB3_TX1- 17 USB3_TX2- 27 LAN1_MDI3N

9 USB3_TX1+ 18 USB3_TX2+

Chapter 2: Jumper & Connectors

CT-XCL01 l User’s Manual

20

PCIEX16_1: PCI-Express X16 Socket

Connector Type: PCI-Express X16 Slot

Pin Definition Pin Definition Pin Definition Pin Definition

A1 PRSNT#1 A42 GND B1 +12v B42 HSOn(6)

A2 +12v A43 HSIp(6) B2 +12v B43 GND

A3 +12v A44 HSIn(6) B3 +12v B44 GND

A4 GND A45 GND B4 GND B45 HSOp(7)

A5 JTAG2 A46 GND B5 SMCLK B46 HSOn(7)

A6 JTAG3 A47 HSIp(7) B6 SMDAT B47 GND

A7 JTAG4 A48 HSIn(7) B7 GND B48 PRSNT#2

A8 JTAG5 A49 GND B8 +3.3v B49 GND

A9 +3.3v A50 RSVD B9 JTAG1 B50 HSOp(8)

A10 +3.3v A51 GND B10 3.3Vaux B51 HSOn(8)

A11 PWRGD A52 HSIp(8) B11 WAKE# B52 GND

A12 GND A53 HSIn(8) B12 RSVD B53 GND

A13 REFCLK+ A54 GND B13 GND B54 HSOp(9)

A14 REFCLK- A55 GND B14 HSOp(0) B55 HSOn(9)

A15 GND A56 HSIp(9) B15 HSOn(0) A56 GND

A16 HSIp(0) A57 HSIn(9) B16 GND B57 GND

A17 HSIn(0) A58 GND B17 PRSNT#2 B58 HSOp(10)

A18 GND A59 GND B18 GND B59 HSOn(10)

A19 RSVD A60 HSIp(10) B19 HSOp(1) B60 GND

A20 GND A61 HSIn(10) B20 HSOn(1) B61 GND

A21 HSIp(1) A62 GND B21 GND B62 HSOp(11)

A22 HSIn(1) A63 GND B22 GND B63 HSOn(11)

A23 GND A64 HSIp(11) B23 HSOp(2) B64 GND

A24 GND A65 HSIn(11) B24 HSOn(2) B65 GND

A25 HSIp(2) A66 GND B25 GND B66 HSOp(12)

A26 HSIn(2) A67 GND B26 GND B67 HSOn(12)

A27 GND A68 HSIp(12) B27 HSOp(3) B68 GND

A28 GND A69 HSIn(12) B28 HSOn(3) B69 GND

A29 HSIp(3) A70 GND B29 GND B70 HSOp(13)

A30 HSIn(3) A71 GND B30 RSVD B71 HSOn(13)

A31 GND A72 HSIp(13) B31 PRSNT#2 B72 GND

A32 RSVD A73 HSIn(13) B32 GND B73 GND

A33 RSVD A74 GND B33 HSOp(4) B74 HSOp(14)

A34 GND A75 GND B34 HSOn(4) B75 HSOn(14)

A35 HSIp(4) A76 HSIp(14) B35 GND B76 GND

A36 HSIn(4) A77 HSIn(14) B36 GND B77 GND

A37 GND A78 GND B37 HSOp(5) B78 HSOp(15)

A38 GND A79 GND B38 HSOn(5) B79 HSOn(15)

A39 HSIp(5) A80 HSIp(15) B39 GND B80 GND

A40 HSIn(5) A81 HSIn(15) B40 GND B81 PRSNT#2

A41 GND A82 GND B41 HSOp(6) B82 RSVD#2

Chapter 2: Jumper & Connectors

Page is loading ...

Premio CT-XCL01 User manual

Premio CT-XCL01 User manual

Related papers

Other documents