ABOUT YOUR INFINEA® X CHARGING STATION (1-UNIT)
GETTING STARTED
QUICK START GUIDE
INFINEA® X
Charging Station
(1-Unit)
iPod 6, iPhone SE &
iPhone 7
1. Place the charging station on a sturdy, clean and
dry surface in an open, well-ventilated area away
from direct sunlight.
2. Gently insert the bottom of the device into the
charging cup, ensuring the unit is seated upright so
that proper contact is made with the charging pins
(Fig. 1).
3. Plug USB (Fig. 2) connector end of Infinea X
Charging Station into an appropriate power supply
(5.2V 2.4A, not included).
4. Confirm the Infinea X LED indicator turns green to
indicate charging is active.
5. On the charging station, pull the device straight up
and out of the charging bay.
PRODUCT SPECIFICATIONS
Mechanical
Compatibility
Innea X with iPod 6, iPhone SE, or
iPhone 7
Innea X with iPhone 7
Weight
450g (15.9 oz.) 460g (16.2 oz.)
Dimensions
121 mm x 106.3 mm x 54.5 mm
(4.8” x 4.2” x 2.15”)
121 mm x 106.3 mm x 61.4 mm
(4.8” x 4.2” x 2.4”)
Cable Length 3’ (914.4 mm)
Electrical
Connector
USB A
Input
5V 2.1A DC (Minimum)
Environmental
Operating
Temperature
0°F to 35°F (32°C to 95°C)
Storage Temperature
-20°F to 45°F (-4°C to 113°C)
Relative Humidity
5% to 95% Non-Condensing
1
2
Accessories are not currently available for the
Innea X Charging Station (1-Unit).
Please visit our website at ipcmobile.com,
or contact your Innite Peripherals account
representative, for additional information
about our current and future product accessory
oerings.
Note: iOS device and other additional items
shown on cover page may not be included.
ACCESSORIES
Mobility Sales/Technical Center
Innite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: (866) 278-7860
Oce: (949) 222-0300
Headquarters/Main Warehouse
Innite Peripherals, Inc.
2312 Touhy Avenue
Elk Grove Village, IL 60004
Toll-Free: (800) 278-7860
Oce: (847) 818-1260
Fax: (847) 818-1287
Specications subject to change without notice. Innite Peripherals,
Mobilize Your Enterprise, Linea Pro, Innea, Innea Tab and Innea Omni
are trademarks of Innite Peripherals, Inc. All other trademarks are the
property of their respective owners.
Technical Support
Innite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: (866) 278-7860
Oce: (949) 222-0300
Email
Website
ipcmobile.com
•
Note: Box contents and part numbers may vary
based on order configuration.
Innite Peripherals (IPC) does not warrant, and is
not responsible for, any damage to the Innea X for
iPhone 7 Charging Station (“Product”) as a result
of liquid or solid particle intrusion into the Product
or damage caused by dropping the Product. If a
material or workmanship defect arises with regard
to any IPC product, and a valid claim is received
within the Warranty Period, IPC (at IPC’s sole
discretion) will (1) repair the Product using new or
refurbished parts, or (2) replace the Product with
a new or refurbished Product. For purposes of this
limited warranty, “refurbished” means a product
or part that has been substantially returned to its
original specications. In the event of a defect,
these are your exclusive remedies.
QSG-10038 Rev. A
WARNINGS & CAUTIONS
Please observe the following precautions:
• Keep the charger away from liquids. Do not
immerse the charger in water.
• The charger is intended for Indoor use only.
When not in use, place the charger in a cool,
dry place.
• Do not place the charger near a heat source.
Keep both the power supply and charger
away from direct sunlight and/or heat.
• Device should only be repaired by IPC or an
authorized service facility.
• Do not use any USB connector other than
the one provided with this charger. The use
of any other USB connector may damage
the charger and will void the warranty.
WARRANTY
TROUBLESHOOTING
PRODUCT RETURNS
Use the link provided to create an account and
gain access to our Knowledge Base and online
support services. Through our online support
center, you’ll be able to download les, open a
Support Ticket, manage your RMAs, view your
account Prole and subscribe to Alerts.
To request a RMA:
1. Create a user account in the RMA Support
Portal at http://ipcmobile.com/support/
rma/
2. Login to your user account and click the
Create RMA Request option.
3. Read the instructions provided and
complete the online request form.
4. Note the assigned RMA number and write
it clearly on your shipping carton.
5. Ship your equipment back to us at the
address provided.
ADDITIONAL INFORMATION
Please contact your Innite Peripherals sales representative for technical specications and additional product documentation.
No LED illuminated on Innea X.
• The USB connector is not properly
connected.
• The Innea X is not seated properly in the
charging bay.
The LED is illuminated on the Innea X upon
installation but then turns o.
• Faulty charging cup.
• Faulty device.
/
