Infinite Peripherals Infinea mPOS Plus with FlexCase Quick start guide

Brand
Infinite Peripherals
Model
Infinea mPOS Plus with FlexCase
Type
Quick start guide
ABOUT YOUR CHARGING CUP
GETTING STARTED
QUICK START GUIDE
PRODUCT SPECIFICATIONS
Mechanical
Compatibility: Infinea mPOS Plus with FlexCase
Weight: 94g (3.32 oz.)
Dimensions: 91mm x 46mm x 45mm (3.58” x 1.81” x 1.77”)
Cable Length: 0.8m (32”)
Electrical
Connector: USB A
Input: 5V 2.4A via USB charger (not included)
Environmental
Operating Temperature: -10°C to +40°C (14°F to 104°F)
Storage Temperature: -15°C to 50°C (5°F to 122°F)
Relative Humidity: 5% to 90% Relative Humidity
Installation
Removal
Infinea® mPOS Plus
with FlexCase
Charging Cup
1. Gently insert the bottom of the device
into the charging cup, ensuring the unit is
seated upright so that proper contact is
made with the charging pins.
2. Plug USB connector end of the charging
cup into an appropriate power supply
(5V 2.4A, not included).
3. Confirm LED indicator on the Infinea
mPOS Plus turns green to indicate
charging is active.
There are no accessories currently
available for the Infinea mPOS Plus with
Flex Case Charging Cup. Please visit our
website at ipcmobile.com, or contact your
Infinite Peripherals account representative,
for additional information about our
current and future product accessory
oerings.
Note: iOS device and other additional items
shown on cover page may not be included.
ACCESSORIES
Mobility Sales/Technical Center
Innite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: (866) 278-7860
Oce: (949) 222-0300
Headquarters/Main Warehouse
Innite Peripherals, Inc.
2312 Touhy Avenue
Elk Grove Village, IL 60004
Toll-Free: (800) 278-7860
Oce: (847) 818-1260
Fax: (847) 818-1287
Specications subject to change without notice. Innite
Peripherals, Mobilize Your Enterprise, Linea Pro, Innea, Innea
Tab and Innea Omni are trademarks of Innite Peripherals,
Inc. All other trademarks are the property of their respective
owners.
Technical Support
Innite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: (866) 278-7860
Oce: (949) 222-0300
Email
[email protected]
Website
ipcmobile.com
•
Note: Box contents and part numbers may vary based on
order configuration.
Infinite Peripherals does not warrant, and
is not responsible for, any damage to the
Infinea mPOS Plus with FlexCase Charging
Cup (“Product”) as a result of liquid or solid
particle intrusion into the Product or damage
caused by dropping the Product. If a material
or workmanship defect arises with regard
to any Infinite Peripherals product, and a
valid claim is received within the Warranty
Period, Infinite Peripherals (at its sole
discretion) will (1) repair the Product using
new or refurbished parts, or (2) replace the
Product with a new or refurbished Product.
For purposes of this limited warranty,
“refurbished” means a product or part that
has been substantially returned to its original
specifications. In the event of a defect, these
are your exclusive remedies.
QSG-10045 Rev. A
WARNINGS & CAUTIONS
Please observe the following precautions:
• Keep the charging cup away from liquids.
Do not immerse the charger in water.
• The charging cup is intended for Indoor
use only. When not in use, place the cup
in a cool, dry place.
• Do not place the charging cup near a heat
source. Keep both the power supply and
charger away from direct sunlight and/or
heat.
• Device should only be repaired by Infinite
Peripherals or an authorized service
facility.
WARRANTY
TROUBLESHOOTING
PRODUCT RETURNS
Use the link provided to create an account and
gain access to our Knowledge Base and online
support services. Through our online support
center, you’ll be able to download files, open a
Support Ticket, manage your RMAs, view your
account Profile and subscribe to Alerts.
To request a RMA:
1. Create a user account in the RMA
Support Portal at https://ipcmobile.com/
support/rma-support.
2. Login to your user account and click the
Create RMA Request option.
3. Read the instructions provided and
complete the online request form.
4. Note the assigned RMA number and write
it clearly on your shipping carton.
5. Ship your equipment back to us at the
address provided.
ADDITIONAL INFORMATION
Please contact your Infinite Peripherals sales
representative for technical specifications and
additional product documentation.
No LED illuminated on Infinea mPOS Plus.
• The USB connector is not properly
connected
• The Infinea mPOS Plus is not seated
properly in the charging cup.
The LED is illuminated on the Infinea mPOS
Plus upon installation but then turns o.
• Faulty charging cup.
• Faulty device.
  • Page 1 1
  • Page 2 2

Infinite Peripherals Infinea mPOS Plus with FlexCase Quick start guide

Brand
Infinite Peripherals
Model
Infinea mPOS Plus with FlexCase
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents