MV Agusta Brutale 990 R Workshop Manual

The reproduction, even partial of this document is forbidden without prior written agreement of MV Agusta S.p.A.

Part no. 8A00B3256 - Edition no. 2

Printed – July 2010

- 2 -

Statement

This manual, to be used by the MV Agusta authorised workshops has been realised with the

purpose of assisting authorised personnel in maintenance and repairs operations of the

motorcycle. The knowledge of technical data herein noted, determines the complete profes-

sional training of the technician.

With purpose of making the reading of this manual immediately comprehensible, the para-

graphs have been aligned with detailed illustrations that highlight the argument dealt with.

Useful advice

To prevent any problems and to reach an excellent final result, MV Agusta recommends

keeping to the following guidelines:

- In the case of an eventual repair, evaluate the client’s impressions who states that there

is an abnormal functioning of the motorcycle and to formulate the right questions to

clarify the symptoms of the problem.

- Clearly diagnose the cause of the abnormality. The basic fundamental theories can be

absorbed by reading this manual that must necessarily be integrated to the personal

experience and the participation of training courses that are periodically organised by

MV Agusta.

- Rationally plan the repair to avoid slack periods, e.g. the collection of spare parts, the

preparation of tools and equipment, etc.

- To reach the part to be repaired limiting the work to the essential operations.

With regards to this, a valid help would be to consult this manual with regards to the

sequences of removal demonstrated in this manual.

Informative note

MV Agusta S.p.A. is committed to a policy of continuous improvement of their products. For

this reason, there could be slight differences between that which is written here and the

motorcycle on which repairs and/or maintenance are about to be carried out. MV Agusta

models are exported to many countries where different norms in relation to the highway

code and homologation procedures are valid. Hoping that you will comprehend these prob-

lems, MV Agusta S.p.A. reserves the right to make modifications to its products and tech-

nical documentation at any moment and without prior announcement.

Respect and defend the environment

Everything that we do has repercussions on the entire planet and its resources.

MV Agusta, wanting to protect the interest of the people, would like to make the client and

the technicians of the technical assistance centres aware and to adopt modalities of use of

the motorcycle and the disposure of its parts in full respect of the norms in force in terms of

environmental pollution, disposal and the recycling of waste.

Freni

- 3 -

A

General Index

GENERAL DESCRIPTION........................................................................................

MAINTENANCE ........................................................................................................

BODYWORK ............................................................................................................

AIR INTAKE INJECTION SYSTEM ..........................................................................

ELECTRICAL SYSTEM ............................................................................................

SUSPENSION AND WHEELS..................................................................................

FRAME......................................................................................................................

BRAKES....................................................................................................................

COOLING SYSTEM AND LUBRICATION SYSTEM................................................

SPECIAL TOOLS......................................................................................................

TORQUE PRESSURES............................................................................................

DIAGNOSTICS..........................................................................................................

ANALYTICAL INDEX ................................................................................................

Rev. 0

B

Rev. 1

C

Rev. 1

D

Rev. 0

E

Rev. 1

F

Rev. 1

G

Rev. 1

H

Rev. 1

L

Rev. 0

M

Rev. 1

N

Rev. 1

O

Rev. 0

P

Rev. 1

- 1 -

General description

A

SECTION A

Revision 0

- 2 -

General description

A

SUMMARY

HOW TO CONSULT THIS MANUAL .........................................................................................................PAGE 3

PURPOSE OF THE MANUAL....................................................................................................................PAGE 3

GLOSSARY AND SYMBOLS.....................................................................................................................PAGE 4

RIGHT HAND AND LEFT HAND STANDARD ..........................................................................................PAGE 5

SAFETY .....................................................................................................................................................PAGE 6

WARNING ..................................................................................................................................................PAGE 8

INDEX..........................................................................................................................................................PAGE 8

OPERATIVE TECHNICAL SPECIFICATIONS ...........................................................................................PAGE 9

General description

HOW TO CONSULT THIS MANUAL

Order of the subjects

This manual is divided into chapters that deal with the

sub-groups of the motorcycle.

To quickly find the chapter required, the pages of each

chapter are marked with a reference mark aligned to

the relative item in the general index..

- 3 -

A

EXAMPLE

Steering pin tightening

Screw in the steering pin flange ring, without tighte-

ning.

This operation must be done manually.

Check that the steering base is at the end of its travel,

to the right.

Using the special tool tighten the ring (1) by rotating it

10° calculated approximately as one third of the

movement between the two holes of the ring (2) of the

steering head (see the figure).

Specific tool N. 800091645

Display of the operations

The operations of disassembly, assembly, removal and control are presented with the help of illustrations (designs and

photographs).

The illustrations contain symbols that indicate the procedure, special tools and other information. See the symbols lists

for their significance.

The procedures are described step after step.

PURPOSE OF THE MANUAL

Principally, this manual has been written for MV Agusta dealers and qualified mechanics.

It is not possible to document all the knowledge necessary for a mechanic in a manual. Those who utilise it must have a

basic knowledge of mechanical concepts and the inherent procedures in the techniques of repairing motorcycles. Without

this knowledge, The maintenance and repair operations can render the motorcycle unsafe for use.

Updates

MV Agusta S.p.A. is committed to a policy of continuous updating of the models produced. The modifications and

significant changes to the specifications and the procedures will be communicated to the official dealers and will

appear in future editions of this manual.

All information, instructions and technical data included in this manual are based upon information on the product

updated at the moment of going to print. MV Agusta S.p.A. reserves the right to carry out changes at any moment

without prior notice and without incurring any obligation.

- 4 -

General description

A

This signifies that the lack of

or the incomplete observan-

ce of this advice can be gra-

vely dangerous for your

safety and for the safety of

other persons.

ATTENTION

This signifies that the lack of

observance of these instruc-

tions can bring the risk of

damage to the motorcycle

and the equipment.

Supplies key information for the best fulfil-

ment of the operation.

N.B.

Utilise a specific tool or equipment for

the correct carrying out of the operation

described.

Tighten to the specified torque.

Tolerance or limit of use.

Utilise the tester.

Use the recommended oil.

Use the recommended grease.

Use the recommended brake fluid

Use the recommended suspension fluid.

Use the recommended coolant.

Use the recommended thread-locking

fluid.

Use the recommended sealant.

Carry out accurate cleaning.

Use new components.

Substitute the component.

Do not leave litter about.

GLOSSARY AND SYMBOLS

WARNING

General description

- 5 -

RIGHT HAND AND LEFT HAND STANDARD

In order to specify the right/left convention used within the chapters of this manual, see the following motorcycle

and engine scheme where all sides which refer to are reported.

A

Cylinder 3

Left side

Right side

Left side

Cylinder 4

Cylinder 2

Cylinder 1

- 6 -

General description

A

SAFETY

Carbon Monoxide

• Exhaust gases contain carbon monoxide (CO) that is poisonous. Carbon monoxide can cause the loss of consciou-

sness and death.

• If it is necessary to switch on the engine, check that the environment is well ventilated. Never switch on the engine

in an enclosed environment.

• Switching on the engine can only be carried out in an enclosed environment when there are the appropriate devices

for the evacuation of exhaust gases.

Petrol

• Petrol is extremely inflammable and under certain conditions can be explosive.

• Keep sources of heat, sparks and flames away from the work area.

• Always work in a well-ventilated area.

• Never use petrol as a cleaning solvent. Generally, avoid handling it unless it is absolutely necessary.

• Do not use petrol for cleaning components by using compressed air.

• Keep petrol out of reach of children.

Engine oil

• Engine oil can cause skin illnesses if in constant and long contact with the skin.

• If the skin comes into contact with engine oil, wash the parts affected as soon as possible with soap and water.

• If engine oil comes into contact with the eyes, abundantly rinse with water and consult a doctor immediately.

• If engine oil is swallowed, do not provocate vomiting to avoid the aspiration of the product into the lungs. Transport

the injured person immediately to hospital.

• Used oil contains dangerous substances and poisonous for the environment. To substitute oil, it is recommended to

go to an authorised MV Agusta dealer who is equipped to deal with the collection of used oil in respect of the norms

in force.

• Do not dispose of used oil in the environment.

• Keep used oil out of the reach of children.

Engine coolant

• Under certain situations, the ethylene glycol contained in the engine coolant is inflammable and its flame is invisible.

Ethylene glycol would cause serious burns if ignited because it is invisible.

• Avoid bringing the engine coolant into contact with hot parts. Such parts could be sufficiently hot to ignite the coo-

lant.

• The engine coolant (ethylene glycol) can cause irritation of the skin and is poisonous if swallowed.

• If the engine coolant comes into contact with the skin, immediately remove any contaminated clothing and wash with

soap and water. If it comes into contact with the eyes, abundantly rinse with clean water and immediately consult a

doctor. If swallowed, do not provocate vomiting to avoid the aspiration of the product into the lungs. Administer clean

water and transport the injured person immediately to hospital and show the product to the doctor.

• If exposed to high concentrations of vapour, transport the injured person to a non-poisonous atmosphere and if

necessary call a doctor.

• Do not remove the radiator cap when the engine is still hot. Being under pressure, the engine coolant can be vio-

lently ejected and therefore provocate burns.

• The engine coolant contains dangerous and poisonous substances and is therefore dangerous for the environment.

To substitute used engine coolant, it is advisable to go to the authorised MV Agusta dealer who is equipped to deal

with the collection of used engine coolant in respect of the norms in force.

• Do not dispose of engine coolant in the environment.

• Keep engine coolant out of reach of children.

ATTENTION

The information contained in this paragraph is fundamental so that the operations carried

out on the motorcycle can be conducted with minimum risk to the mechanic.

General description

- 7 -

A

Brake fluid

• Brake fluid is extremely corrosive.

• Avoid any contacts with the eyes, skin and the mucous membrane.

• If brake liquid comes into contact with the skin, remove all contaminated clothing and wash immediately with soap

and water.

• If brake fluid comes into contact with the eyes, abundantly rinse with water and call a doctor.

• If swallowed, do not provocate vomiting to avoid aspiration of the product into the lungs. Immediately call a doctor.

• Take the injured person immediately to hospital, if he has breathed brake fluid into the lungs.

• In the case of exposure to high concentrations of vapour, move the injured person to a non-poisonous atmosphere

and if necessary call a doctor.

• In the case of accidental contact, rinse abundantly with water and call a doctor.

• Keep brake fluid out of reach of children.

Thread-locking fluid

• As it is not classified as dangerous, the prolonged contact with the skin, particularly with regards to abrasions can

provocate sensitiveness and dermatitis. In the case of contact with the skin, rinse abundantly with running water.

• Move the injured person into the open air and call a doctor if the injured person feels ill after having breathed in the

product.

• In the case of contact with the eyes, rinse abundantly with water for at least 15 minutes.

• If the thread-locking fluid has been swallowed, drink an abundant quantity of water or milk. Do not provocate vomi-

ting to avoid the aspiration of the product into the lungs. Immediately call a doctor.

• Keep out of reach of children.

Nitrogen - rear shock absorber

• The rear shock absorber contains nitrogen under pressure.

• Before disposing of used shock absorbers, discharge the nitrogen via the depressurising valve.

• Utilise only nitrogen to pressurise the shock absorber. The use of unstable gases can cause explosions that could

cause burns.

• Do not place the shock absorber near to flames or sources of heat as this could cause explosions with consequent

burns.

• Keep out of reach of children.

Battery

• The battery produces explosive gases. Keep it away from sparks, flames or cigarettes. During recharging, adequa-

tely ventilate the environment.

• The battery contains a solution of sulphuric acid (electrolyte).

• Sulphuric acid is corrosive and it destroys many materials and clothing. On contact with small quantities of water it

generates a violent reaction that manifests itself by creating large quantity of heat and spurts of hot acid. Sulphuric

acid attacks many metals thereby liberating hydrogen: an inflammable gas that forms an explosive mixture when

mixed with air.

• Contact with sulphuric acid can cause burns. In the case of contact, remove immediately all contaminated clothing

and wash the skin with abundant quantities of water. Take the injured person to hospital if necessary.

• In the case of contact with the eyes, rinse immediately with abundant water. Call a doctor and continue with the treat-

ment until the doctor arrives.

• If the electrolyte is swallowed, rinse the mouth with water without swallowing. Take the injured person immediately

to hospital and explain to the doctor there what the injured person has swallowed.

• The battery contains dangerous substances that are poisonous for the environment. It is advisable to substitute it at

an MV Agusta dealer that is equipped to dispose of this product in respect of the norms in force.

• Do not dispose of used batteries in the environment.

• Keep out of reach of children.

Hot parts

• The engine and the exhaust system become very hot and maintain this temperature for some time after the engine

has been switched off. Wait for these parts to cool down before handling them or working on the motorcycle near to

them. Use protective gloves.

- 8 -

General description

A

GENERAL INDEX

SUMMARY OF EACH CHAPTER

INDEX

AVVERTENZE

The information contained in this

paragraph is important so that the

operations carried out on the

motorcycle can be conducted without damaging the motorcy-

cle.

• Thoroughly clean the motorcycle before disassembling it.

• During disassembly, clean all parts and place them in con-

tainers respecting exactly the order of disassembly.

• Always use the special utensils where necessary and

each time where prescribed.

• Always use adhesives, sealants and lubricants where pre-

scribed. Respect the instructions about their technical

characteristics.

• Always substitute parts such as gaskets, O-rings, security

washers with new parts.

• Loosening and tightening nuts or screws, always start

from the bigger ones or the centre. Always comply with the

torque wrench settings.

• Utilise only MV Agusta spare parts.

WARNING

General description

- 9 -

A

OPERATIVE TECHNICAL SPECIFICATIONS

MOTORCYCLE IDENTIFICATION

1) Frame registration number

2) Engine registration number

3) Homologation date

The registration number of the motorcycle is stamped on the right side of the steering head.

The engine part number is stamped on the top half casing near the fork.

ZCG B5 10 AA Y V 000000

Manufacturer identification

Vehicle model

Progressive frame number

Below is an example of the designation of the frame registration number:

2) Engine registration number

1) Frame registration number

3) Homologation date

- 10 -

General description

A

B

- 1 -

Maintenance

SECTION B

Revision 1

- 2 -

Maintenance

B

SUMMARY

TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 3

TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 3

PERIODICAL MAINTENANCE SCHEDULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 6

MAINTENANCE AND TUNING OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 8

ENGINE OIL AND OIL FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 8

ENGINE COOLANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 12

ELECTRIC FANS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 14

VALVE MECHANISM ADJUSTMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 15

SPARK PLUGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 26

FUEL FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 27

FUEL PUMP ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 33

FUEL UNION TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 36

ASSEMBLY OF FUEL TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 36

THROTTLE BODY ADJUSTMENT AND TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 38

AIR FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 42

BRAKES AND CLUTCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 45

BRAKE/CLUTCH/GEARCHANGE COMMANDS CHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 48

BRAKE PADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 50

ACCELERATOR CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 50

LOCKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 52

STEERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 54

TRANSMISSION CHAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 54

TYRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 57

FRONT WHEEL BEARINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 57

WHEELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 58

REAR WHEEL HUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 59

SWINGARM BEARINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 59

REAR SHOCK ABSORBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 59

SIDE STAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 60

FRONT FORK

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 61

SCREWS AND NUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 61

TUBE BAND FASTENERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 61

ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 62

BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 62

INSTRUMENTS AND WARNING LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 65

LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 85

FRONT HEADLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 90

Description BRUTALE 990 R BRUTALE 1090 RR

CHARACTERISTICS

Wheelbase (mm) (*) 1438 1438

Total length (mm) (*) 2093 2093

Maximum width (mm) 760 760

Seat height (mm) (*) 830 830

Ground clearance (mm) (*) 150 150

Trail (mm) (*) 103,5 103,5

Dry weight (kg) 190 190

Fuel tank capacity (lt) (**) 23 23

Fuel reserve (lt) (**) 4 4

Sump oil quantity (kg) 3,5 3,5

ENGINE

Type 4 Stroke four cylinder, 16 valves

Bore (mm) 76,0 79,0

Stroke (mm) 55,0 55,0

Displacement (cm

3

) 998 1078

Compression ratio 13 : 1 13 : 1

Starter system Electrical

Cooling Cooling with separate liquid and oil radiators

Engine casing and covers Die-cast

Cylinder head and cylinders Chill-cast

Valves Bi-metal / mono-metal

B

Maintenance

- 3 -

TECHNICAL INFORMATION

TECHNICAL DATA

* : The data declared are not binding. They are susceptible to variations due to riding conditions.

**: The data declared are not binding. They are susceptible to variations due to external temperature, engine temperature and the evaporation point of the petrol used.

2093

760

1438

150

830

Maintenance

B

- 4 -

TECHNICAL DATA

* :In the event of different make tyres being used as opposed to those advised, refer to the pressure values marked on the side of the tyre by the manufacturer.

Description BRUTALE 990 R BRUTALE 1090 RR

TIMING

Type D.O.H.C. radial valves D.O.H.C. radial valves

LUBRICATION

Type Wet sump Wet sump

IGNITION – FUEL FEED SYSTEM

Type Magneti Marelli 5.SM starter-injection system with Mikuni throttle body

Induction-discharge electronic starter, “Multipoint” phased sequencial electronic injection

Spark plugs (alternatively) NGK CR9 EB NGK CR9 EB

Spark gap (mm) 0.7 ÷ 0.8 0.7 ÷ 0.8

CLUTCH

Type Multiple-disc in oil bath Multiple-disc in oil bath with anti-surging device

PRIMARY TRANSMISSION

N° teeth - engine crankshaft gear Z = 50 Z = 50

N° teeth - clutch gear Z = 79 Z = 79

Transmission ratio 1.58 1.58

SECONDARY TRANSMISSION

N° teeth – pinion wheel Z = 15 Z = 15

N° teeth – crown wheel Z = 41 Z = 41

Transmission ratio 2.73 2.73

GEAR CHANGE

Type Extractable six speed, with gearing always inserted

Gear ratios (total ratios)

First 2.92 (12.59) 2.92 (12.59)

Second 2.12 (9.14) 2.12 (9.14)

Third 1.78 (7.68) 1.78 (7.68)

Fourth 1.50 (6.47) 1.50 (6.47)

Fifth 1.32 (5.69) 1.32 (5.69)

Sixth 1.21 (5.22) 1.21 (5.22)

FRAME

Type Tubular framework in wire-drawn steel tubes 25 CrMo (TIG welding)

Swingarm fulcrum plates Aluminium alloy Aluminium alloy

FRONT SUSPENSION

Type

Hydraulic telescopic forks with the stems positioned upside down, equipped with

a system of external adjustment for extension, compression and spring preload

Ø stems (mm) 50 50

Telescopic movement (mm) 125 125

REAR SUSPENSION

Progressive, single shock absorber with rebound Progressive, single shock absorber with adjustable rebound and

damping and spring preload adjustment compression (high/low speed) damping and spring preload

Swingarm Aluminium alloy Aluminium alloy

Wheel travel (mm) 120 120

FRONT BRAKE

Type Dual floating disc with steel braking band

Ø discs (mm) 310 320

Disc flanges Steel Aluminium

Calipers (Ø pistons mm) Radial-type, 4-piston ( Ø 32 ) Radial monobloc with 4 pistons (Ø 34)

REAR BRAKE

Type Single steel disc Single steel disc

Ø discs (mm) 210 210

Calipers (Ø pistons mm) 4-piston ( Ø 25.4 ) 4-piston ( Ø 25.4 )

FRONT WHEEL

Material Aluminium alloy Aluminium alloy

Dimensions 3.50” x 17” 3.50” x 17”

REAR WHEEL

Material Aluminium alloy Aluminium alloy

Dimensions 6.00” x 17” 6.00” x 17”

TYRES

Front 120/70-ZR 17 (58 W) 120/70-ZR 17 (58 W)

Rear 190/55-ZR 17 (75 W) 190/55-ZR 17 (75 W)

Brand and type PIRELLI - Diablo Corsa III PIRELLI - Dragon Supercorsa Pro

PIRELLI - Diablo Rosso DUNLOP - Sport Max Qualifier RR

Tyre pressures (*)

Front 2.3 bar (33 psi) 2.3 bar (33 psi)

Rear 2.3 bar (33 psi) 2.3 bar (33 psi)

Page is loading ...

MV Agusta Brutale 990 R, Brutale 1090 Workshop Manual

Related papers

Other documents