INSTALLATION GUIDE
San Fran 3 Person
Run Workstation
Size: 1400x800 mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran 3 Person
Run Workstation
Size: 1400x800 mm
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
1
5
6
6
8
4
2
3
10
11
7
9
13
12
Table Top (1400x800) x3
Leg x8
Adjustable Foot x8
Leg Cable Cover x8
San Fran Beam 1350mm x2
San Fran Beam 1120mm x4
1
2
3
4
5
6
M8x12mm Dome Head x20
M8x20mm Cap Head x8
M5x20mm Self Tapping x16
12
13
14
COMPONENTS
San Fran Beam 120mm x4
T connectors x4
T connectors Cap x4
90 Degree connectors x4
90 Degree connectors Cap x4
7
8
9
10
11
SCREWS
INSTALLATION GUIDE
San Fran 3 Person
Run Workstation
Size: 1400x800 mm
01
03
02
Slide the 2 way and 3 way connectors over each leg, and securely
lock into place using M8x20mm cap head screws (13).
Securely connect legs to rails lenghts using M8x12mm dome head screws (11).
Securely connect legs to rails widths using M8x12mm dome head screws (12). Ensure the worksurface is centered over the frame.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
04
Drill all M5x20mm self tapping screws (14)
through each leg into the worksurface. Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto required rails and fully tighten in place.
INSTALLATION GUIDE
San Fran 3 Person
Run Workstation
Size: 1400x800 mm
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05 Optional
/
