multicomp pro U3 10HUB User manual

Brand: multicomp pro

Model: U3 10HUB

Category: Interface hubs

Type: User manual

Page <1> V1.003/04/23

Newark.com/multicomp-pro

Farnell.com/multicomp-pro

sg.element14.com/b/multicomp-pro

User Manual

USB 3.0 10-Port HUB

Part Number: U3 10HUB

Table of Content

Introduction ...............................................................2

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Specications .............................................................2

Package Contents ..........................................................3

Connection Diagram ........................................................3

Page <2> V1.003/04/23

Newark.com/multicomp-pro

Farnell.com/multicomp-pro

sg.element14.com/b/multicomp-pro

Dear Customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before

connecting, operating or using this product. Please keep this manual for future reference.

Introduction

This is a USB 3.0 10-Port HUB designed for connecting 10 USB devices from a host computer or another hub, it contains

2 USB 3.0 ports and 8 USB 2.0 ports. It can work on the host that with USB-A port without additional driver.

Features

• Interface:

USB 3.0 Micro B Femalex1 (through a cable connect to host PC)

USB 3.0 A Female x2

USB 2.0 A Female x8

DC Jack x1(5V/4A)

• 2 USB 3.0 A ports support USB 3.0 super speed (5Gbps) transmission, downward compatible with USB 2.0.

One USB-A port(Close to DC Jack) supports max 5V/1.5A downstream charging, another one supports max 900mA down-

stream charging.

• 8 USB 2.0 A ports support max 480Mbps data transmission and max 500mA downstream charging per port

• Support connecting 10 USB devices simultaneously and 10 ports share max 4A9.

• DC Jack supports max 5V/4A power in

Note: The power supply is optional, it’s necessary when connecting high-current devices, when connecting low-current

devices, then don’t need.

Specications

Input/Output Connector

Input USB 3.0 Micro B Female x1

Output

USB 3.0 A Female x2

USB 2.0 A Female x8

DC Jack x1(5V/4A)

Physical

Size(L-W-H) 221mm×33.28mm×16mm

Weight 83g

Warranty

Limited Warranty 12 Months

Environmental

Operating Temperature 0°C to +45°C

Operating Humidity 10% to 85% RH (no condensation)

Storage Temperature -10°C to +70°C

Storage Humidity 5% to 90% RH (no condensation)

Regulatory Approvals

Certications FCC, CE

Page <3> V1.003/04/23

Newark.com/multicomp-pro

Farnell.com/multicomp-pro

sg.element14.com/b/multicomp-pro

Power Supply

Power Source External power supply

Accessories

User Manual English Version

Package Contents

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping

carton:

• Main unit x1

• User Manual x1

• USB3.0 Micro B male to USB 3.0 A male cable x1(0.8m)

• 5V/4A DC Power Supply (Optional)

Connection Diagram

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for

the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,

any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make

any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or

where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its

negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.