3M Scotch® Restickable Strips 1 in X 3 in, Clear Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the 3M Scotch® Restickable Strips 1 in X 3 in, Clear Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3M, Scotch and the Plaid Design are trademarks of 3M.
Scotchbrand.com/Mounting
Scotch
®
Brand Tapes
Great ideas that stick
Restickable
Strips For Mounting
Reusable & Removable*
• Double-sided adhesive tab for mounting and securing
objects
• Great for hanging and securing artwork, photos, lists,
knick knacks, cards and other lightweight items
• Use on most at surfaces, including stainless steel,
plastic, concrete, glass, wood, painted walls.. and more
Steps:
• Peel o tab from clear bottom liner and apply a tab to
each corner of the object’s backside.
• Remove top liner and press rmly against
wall/horizontal surface. Use one tab for each 113 g (
0.25 lb ) of weight, not to exceed 453 g ( 1 lb )
• To remove, peel item very slowly from wall/horizontal
surface. Do not pull item straight out. Then, peel tab
from surface very slowly. For rigid, non-paper objects,
twist the object from the adhesive tab during removal.
Reuse again and again!
• With repetitive use or exposure to dust particles, tab
may loose stickiness. Gently wash with soapy water,
rinse and air dry to refresh stickiness.
*Note: Removable adhesive may stick aggressively to some surfaces. Not
recommended for use on wallpaper, delicate surfaces or walls painted with at paint.
May damage some substrates upon removal.
For questions, ideas and special oers go to
Scotchbrand.com/Mounting
Use instead of magnets
or tacks.
Photo
safe
/