3M Scotch® Mounting Putty, Removable 2 oz., White Operating instructions

3M
Brand
3M
Model
Scotch® Mounting Putty, Removable 2 oz., White
Type
Operating instructions

This manual is also suitable for

3M, Scotch and the Plaid Design are trademarks of 3M.
Scotchbrand.com/Mounting
Scotch
®
Brand Tapes
Great ideas that stick
Removable
Mounting Putty
• Apply pressure and it sticks
• Mount artwork, photos, papers and other lightweight
items
• Works on most porous and non-porous surfaces*
including cinder block
Preparing:
The surfaces must be dry and clean. As needed, knead
one or several pieces of putty, approximately ” x ”,
until soft.
Applying:
Adhere the putty to the item to be mounted.
Mounting:
Press the item rmly onto the mounting surface, such as
a wall or a container.
Removal: Remove the putty carefully by peeling it from the
surfaces. Remove putty residue by dabbing the surface with a piece of putty.
Storage: Keep putty in blister or an airtight bag. Conforms to ASTM D-4236. Additional
Product Safety and Health Information Source: Material Safety Data Sheet (18-4680-7)
*
Not recommended for use on wallpaper, delicate surfaces or walls painted with at
paint. May stain certain surfaces.
For questions, ideas and special oers go to
Scotchbrand.com/Mounting
Use instead
of push pins
  • Page 1 1

3M Scotch® Mounting Putty, Removable 2 oz., White Operating instructions

3M
Brand
3M
Model
Scotch® Mounting Putty, Removable 2 oz., White
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents